User's Manual

ManualsBrandsXenon Electronics ManualsElectronics2.4GHz Frequency Hopping GFSK Module

2.4GHz frequency hopping GFSK Transceiver Module User Manual

Functions and features:

The 2.4GHz RF RC module is a two-way radio frequency (RF) module that utilizes

2.4GHz Industrial Scientific Medical (ISM) frequency bands to communicate with other

corresponding devices.

The module transmits RF signal to one or more corresponding devices (after pairing), and

enable real time controlling to its LEDs.

Specifications:

The table below is a summary of specifications for the 2.4GHz RF module:

SPECIFICATION

DETAILS

Power requirements

0.4W (3.3V @ 121mA)

Operating

Frequency

2402MHz to 2478MHz

Operating Ranges

Minimum distance

2 meters

Maximum distance

30 meters

Available Channels

RF Output Power

10dBm +/

3dBm

Dimensions

Width

24mm

Height

27.73mm

Depth

0.7mm

Antenna

Monopole

Gain

1.5dBi max

Type

¼ wave antenna, center frequency

2.45GHz

Construction

Coaxial post and strip

Summary of content (6 pages)

PAGE 1
2.4GHz frequency hopping GFSK Transceiver Module User Manual Functions and features: The 2.4GHz RF RC module is a two-way radio frequency (RF) module that utilizes 2.4GHz Industrial Scientific Medical (ISM) frequency bands to communicate with other corresponding devices. The module transmits RF signal to one or more corresponding devices (after pairing), and enable real time controlling to its LEDs. Specifications: The table below is a summary of specifications for the 2.
PAGE 2
INTEGRATION INFORMATION FOR THE OEM The module is subject to the following FCC rule parts: 15.207, 15.209, 15.247 FCC Label: The FCC ID is on the front of the device. It is easily visible. The device FCC ID is 2ATBKDSMPSDR. A label with the following statements must be attached to the host end-product: This device contains FCC ID: 2ATBKDSMPSDR.
PAGE 3
ISED statement: Label of the end-product: The final end-product must be labeled in a visible area with the following: "Contains IC: 25067-DSMPSDR" Or "Contains transmitter module IC: 25067-DSMPSDR" This Class B digital apparatus complies with Canadian ICES-003. CAN ICES-3 (*)/NMB-3(*) CAUTION: Any changes or modifications not expressly approved by the grantee of this device could void the user’s authority to operate the equipment.
PAGE 4
RSS-247 This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada’s licence-exempt RSS(s). Operation is subject to the following two conditions: (1) This device may not cause interference. (2) This device must accept any interference, including interference that may cause undesired operation of the device.
PAGE 5
FCC PART 15 The module is limited to installation in mobile or fixed applications. The separate approval is required for all other operating configurations, including portable configurations and different antenna configurations. The OEM integrators are responsible for ensuring that the end-user has no manual or instructions to remove or install module. The module is limited to OEM installation ONLY.
PAGE 6
Functional Device: module showing on the left 2.4Ghz frequency hopping GFSK (Device A) Function procedure A B 1. Provide 3.3V power to device A and 5V power to device B (corresponding device) 2. When switch on device A is on, LED on device B light up, vice versa.