User's Manual

ManualsBrandsXENCELABS TECHNOLOGIES ManualsElectronicsQuick Keys

Table Of Contents

WARNING



TO REDUCE THE RISK OF BURNS OR FIRE; DO NOT ATTEMPT TO

OPEN,DISASSEMBLE,CRUSH,PUNCTURE,SHORT EXTERNAL CONTACTS OR DISPOSE OF

IN FIRE OR WATER



MAY EXPLODE IF DISPOSE IN FIRE

 AMBIENT TEMPERATURE MUST NOT EXCEED 60



DISPOSE USED BATTERIES ACCORDING TO USER MANUAL



USE SPECIFIED CHARGER ONLY

FCC regulatory conformance：

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two

conditions:

(1) This device may not cause harmful interference.

(2) This device must accept any interference received, including interference that may cause

undesired operation.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device,

pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against

harmful interference in a residential installation.

This equipment generates uses and can radiate radio frequency energy and, if not installed and used in

accordance with the instructions, may cause harmful interference to radio communications. However, there

is no guarantee that interference will not occur in a particular installation. If this equipment does cause

harmful interference to radio or television reception, which can be determined by turning the equipment off

and on, the user is encouraged to try to correct the interference by one or more of the following measures:

- Reorient or relocate the receiving antenna.

- Increase the separation between the equipment and receiver.

-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

-Consult the dealer or an experienced radio/TV technician for help

NOTE: The manufacturer is not responsible for any radio or TV interference caused by unauthorized

modifications to this equipment. Such modifications could void the user’s authority to operate the

equipment.

RF Exposure

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment.

Summary of content (14 pages)

PAGE 1
WARNING      TO REDUCE THE RISK OF BURNS OR FIRE; DO NOT ATTEMPT TO OPEN,DISASSEMBLE,CRUSH,PUNCTURE,SHORT EXTERNAL CONTACTS OR DISPOSE OF IN FIRE OR WATER MAY EXPLODE IF DISPOSE IN FIRE AMBIENT TEMPERATURE MUST NOT EXCEED 60 DISPOSE USED BATTERIES ACCORDING TO USER MANUAL USE SPECIFIED CHARGER ONLY FCC regulatory conformance： This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference.
PAGE 2
(On manufacturer’s company letter heading) EU Declaration of Conformity (DoC) Hereby we, Name of manufacturer: Address: Zip code & City: Country: Telephone number: declare that this DoC is issued under our sole responsibility and that this product: Product description: Type designation(s): Trademark: Batch / Serial number: Object of the declaration (further identification of the radio equipment allowing traceability; it may include a color image for the identification of the radio equipment): ……[Model: Th
PAGE 3
EU regulatory conformance： RF exposure information: The EIRP power of the device at maximal case is below the exempt condition, 20mWspecified in EN62479: 2010. RF exposure assessment has been performed to prove that this unit will not generate the harmful EM emission above the reference level as specified in EC Council Recommendation(1999/519/EC). Xencelabs Quick Keys Setup SECTION: Quick Keys Thank You We appreciate you choosing Xencelabs.
PAGE 4
7. Product Registration 8. Tutorial videos 9.
PAGE 5
SECTION 1: Quick Keys Box Contents Diagram of Quick Keys Box Contents In the box you will find: Xencelabs Quick Keys Remote Wireless dongle USB cable Carrying case Sticker Warranty card Thank you note If any of these items are missing, please contact the Support Team using this link. They will send you the missing items.
PAGE 6
SECTION 2: Connecting the Xencelabs Quick Keys You can use the Xencelabs Quick Keys with a USB wired connection or over wireless. Note that you should connect the tablet before trying to install the driver. If you bought the bundle, you should also connect the Xencelabs Quick Keys before installing the driver.
PAGE 7
You can connect the Xencelabs Quick Keys wirelessly with the provided dongle which establishes a wireless connection between the computer and the Quick Keys. If you already have a Xencelabs Pen Tablet you can pair the Quick Keys with the dongle that came with your Tablet. A single dongle will connect both the tablet and the Quick Keys. See here for how to pair your Quick Keys with the Tablet dongle. When fully charged, the Quick Keys wireless connection should give you up to 32 hours of continuous use.
PAGE 8
SECTION 4: Charging the Quick Keys To charge the Xencelabs Quick Keys, connect it to a powered-on PC, a powered USB hub or other USB charger (Figure x below). The Quick Keys needs a USB port with 5v and 1.5 amps. To use the Quick Keys over a wireless connection you should make sure it is sufficiently charged. When fully charged, the Quick Keys will give you around 15 hours of continuous use. The driver will give you an indication of tablet charge level.
PAGE 9
SECTION 5: Key Features of the Quick Keys The Xencelabs Quick Keys is a device that adds up to 40 short-cut keys as well as a dial with 4 different modes per application. During driver installation you will have had the opportunity to set the main defaults for your device. Settings will give you many more options which you can set. Here are the main features of the Xencelabs Quick Keys: A. Dial. This is used for functions like zoom or brush size. You can select up to 4 different modes per application.
PAGE 10
SECTION 6: Pairing the Quick Keys with the Tablet dongle (optional) If you already have a Xencelabs Pen Tablet you can pair it with the dongle that came with your tablet. Each dongle can have up to 2 Quick Keys and 1 tablet attached.
PAGE 11
Next: Product Registration Return to Top
PAGE 12
SECTION 7: Product registration Same content as for Tablet Next: Tutorial Videos Return to Top
PAGE 13
SECTION 8: Tutorial videos Insert 2 or three videos about the Quick Keys here Next: More resources Return to Top
PAGE 14
SECTION 9: More Quick Keys Resources Content same as for Tablet section Return to top