User's Manual

ManualsBrandsXENCELABS TECHNOLOGIES ManualsComputers & AccessoriesPen Tablet

Table Of Contents

WARNING



TO REDUCE THE RISK OF BURNS OR FIRE; DO NOT ATTEMPT TO

OPEN,DISASSEMBLE,CRUSH,PUNCTURE,SHORT EXTERNAL CONTACTS OR DISPOSE OF

IN FIRE OR WATER



MAY EXPLODE IF DISPOSE IN FIRE

 AMBIENT TEMPERATURE MUST NOT EXCEED 60



DISPOSE USED BATTERIES ACCORDING TO USER MANUAL



USE SPECIFIED CHARGER ONLY

FCC regulatory conformance：

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two

conditions:

(1) This device may not cause harmful interference.

(2) This device must accept any interference received, including interference that may cause

undesired operation.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital

device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable

protection against harmful interference in a residential installation.

This equipment generates uses and can radiate radio frequency energy and, if not installed and

used in accordance with the instructions, may cause harmful interference to radio

communications. However, there is no guarantee that interference will not occur in a

particular installation. If this equipment does cause harmful interference to radio or television

reception, which can be determined by turning the equipment off and on, the user is

encouraged to try to correct the interference by one or more of the following measures:

- Reorient or relocate the receiving antenna.

- Increase the separation between the equipment and receiver.

-Connect the equipment into an outlet on a circuit different from that to which the receiver is

connected.

-Consult the dealer or an experienced radio/TV technician for help

NOTE: The manufacturer is not responsible for any radio or TV interference caused by

unauthorized modifications to this equipment. Such modifications could void the user’s

authority to operate the equipment.

RF Exposure

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled

environment.

Summary of content (14 pages)

PAGE 1
WARNING      TO REDUCE THE RISK OF BURNS OR FIRE; DO NOT ATTEMPT TO OPEN,DISASSEMBLE,CRUSH,PUNCTURE,SHORT EXTERNAL CONTACTS OR DISPOSE OF IN FIRE OR WATER MAY EXPLODE IF DISPOSE IN FIRE AMBIENT TEMPERATURE MUST NOT EXCEED 60 DISPOSE USED BATTERIES ACCORDING TO USER MANUAL USE SPECIFIED CHARGER ONLY FCC regulatory conformance： This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference.
PAGE 2
(On manufacturer’s company letter heading) EU Declaration of Conformity (DoC) Hereby we, Name of manufacturer: Address: Zip code & City: Country: Telephone number: declare that this DoC is issued under our sole responsibility and that this product: Product description: Type designation(s): Trademark: Batch / Serial number: Object of the declaration (further identification of the radio equipment allowing traceability; it may include a color image for the identification of the radio equipment): ……[Model: Th
PAGE 3
EU regulatory conformance：： RF exposure information: The EIRP power of the device at maximal case is below the exempt condition, 20mW specified in EN62479: 2010. RF exposure assessment has been performed to prove that this unit will not generate the harmful EM emission above the reference level as specified in EC Council Recommendation(1999/519/EC).
PAGE 4
SECTION: Thank you We appreciate you choosing Xencelabs. We spent countless hours with professional artists to co-design the details of this tablet. As result, two pens are provided to accommodate different hand sizes and personal preferences. We’ve made innovations in our pen pressure technology so you can draw with the lightest of touch. If you prefer a heavier touch you can easily adjust it in settings. We believe these pens to be the most sensitive on the market.
PAGE 5
SECTION 1: Tablet Box Contents In the box are: Xencelabs Pen Tablet (SKU: BPH1212W-A) Thin pen 3 Button pen USB cord Pen case with nibs and nib puller Carrying case Dongle for wireless connection USB A to USB C adapter Drawing glove Warranty sheet Thank you and Quick Setup card Xencelabs sticker Image Image Image Image Image Image Image Image Image Image Image Image If any of these items are missing, please reach out to the Support Team using this link. They will be happy to send you the missing items.
PAGE 6
SECTION 2: Connecting the Tablet You can use the tablet with a USB wired connection or over wireless. Note that you should connect the tablet before trying to install the driver. If you bought the bundle, you should also connect the Xencelabs Quick Keys before installing the driver. Connecting the Tablet (and Quick Keys) with a USB Cable To use with a USB connection or to charge the tablet, connect the provided USB cable to the tablet and to a USB-A port on a computer (Figure 1).
PAGE 7
Connecting Wirelessly You can connect the tablet wirelessly (Figure 2) with the provided dongle which establishes a wireless connection between the dongle and the tablet. We have provided an USB-A to USB-C adapter if you need it. If you bought the bundle with the Xencelabs Quick Keys, the single dongle will connect both the tablet and the Quick Keys. When fully charged the wireless connection should give you a full day of continuous use.
PAGE 8
SECTION 3: Install the Driver While the tablet will detect the pen location without a driver, to get the full functionality of the tablet we strongly recommend that you download and install the driver. Note that to install the driver you may need a user account that has admin rights. Visit the support section of the Xencelabs website and select the latest driver for the Xencelabs Pen Tablet Medium. You will find options for Windows, Mac and Linux.
PAGE 9
SECTION 4: Charging the Tablet To charge the tablet (and the Quick Keys if you bought the bundle), connect it to a powered-on PC, a powered USB hub or other USB charger (Figure 3). To use the tablet over a wireless connection you should make sure the tablet is sufficiently charged. When using a 5 volt 1.5 amp power supply, the tablet will take approximately 3 hours to fully charge and will last around 11 hours of continuous use. The driver will give you an indication of tablet charge level.
PAGE 10
SECTION 5: Key Features of the Tablet Figure 4 shows the key features of the tablet including: A. Three buttons at the top of the tablet give access to commonly used functions. All the buttons can be re-assigned in driver settings (see below). If you like to use short-cut keys, you may consider purchasing the optional Xencelabs Quick Keys (included in the Xencelabs Tablet Bundle). B. C. D. E. F. G. H. I.
PAGE 11
Next: Key Features of the Xencelabs Quick Keys Return to top
PAGE 12
SECTION 6: Product Registration Blurb around Registration and Account Setup. Fields to be filled in also The registration page will be a pop-up window, and when completed and closed, it will drop them back off at the Getting Started page. 1. The customer will be asked to register their tablet 2. They will be asked to enter in some key information a. Contct info b. Tablet info and serial number c. A few questions about how they will be using the tablet d.
PAGE 13
SECTION7: Video Tutorials Embed 3-4 tutorial videos here (to be created).
PAGE 14
SECTION 8: More Resources There are many other places you can get more information and help. Please visit the following     Frequently asked questions (open new page) This is a list of questions that are frequently asked by our customers. They cover a variety of topics from how to buy a product through to technical question. The list is regularly updated. Support page Our support page offers a variety of services including how to contact support, download the latest driver and other resources.