X1000 FIRST TIME SET-UP ///
FIRST TIME SET-UP /// THERE ARE TWO BASIC STEPS TO THE FIRST TIME SET UP: 1. Registering your Gateway with the website. 2. Discover devices and register with the Gateway. Click ‘NEXT’ to begin Step 1. Each wireless device (sensors, repeaters) has a Discover button. To begin the device discovery process, you must press the discover button (a device discovery tool is provided with each Homesight product). This must be pressed while Discovery is in progress in order to be Discovered to the Gateway.
NAVIGATION BAR /// From the Homesight Navigation Bar you will have access to your entire account with various functions. ■ ■ ■ ■ ■ ■ Automatic detection of Panasonic IP cameras on your LAN: Monitor: Allows the user to glance at the system status of your devices. Base Unit: Allows the user to arm/disarm devices. Device Setup: Select this option to discover additional devices. Account: Provides registration information, as well as preferences for your temperature units.
DEVICE SETUP: Aside from viewing a listing of all of the devices associated with a particular X1000 account, by clicking ‘CONFIGURE’ option, customers will be presented with control options and setting for a particular device. The message will disappear about 30 seconds after the refresh is complete. Click on the Name of the Device to change settings and configurations. See DEVICE SETUP for more instructions. BASE UNIT: You will have the options of arming or disarming all devices.
Click ‘CONTINUE’. To go back to the Access Keys page to note changes. Information such as registered user name, the ability to un-register your gateway, and editing temperature preferences are presented here. ■ ■ ■ To Un-Register Your Gateway: click ‘REMOVE FROM SERVICE’. To Change the Temperature Preferences From Fahrenheit to Celsius: select the desired preference from the drop down menu, and click ‘SELECT TEMPERATURE UNITS’. If You Change an Option: a new page will appear, click ‘CONTINUE’.
SAFETY, REGULATORY, & SOFTWARE LICENSE INFORMATION /// FCC ID NUMBER: OU4-XG1000 / IC: 4576A CAUTION Changes or modifications not expressly approved by Xanboo for compliance could void the user’s authority to operate the equipment. FCC COMPLIANCE CLASS B DIGITAL DEVICE This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.