Manualshelf

User's Manual

ManualsBrandsXanboo ManualsElectronicsZIGBEE UWS FURNITURE LEG SENSOR
1234
PRODUCT MANUAL
TITLE:
ZIGBEE UWS QC101600
REVISION: 1.0 DATE:
1/18/08
ZigbeeUWS QC101600 1/18/08 Page 1 of 4
Created by Marc Lindahl Last saved by yu
Created on 1/15/2008 3:31 PM
Product Description
The Zigbee UWS or Universal Weight Sensor is designed to detect and report occupancy
of a bed or chair.
Features
- Unique low-profile weight sensor
- Advanced digital signal processing algorithms
- User Tare pushbutton and LED indicators for easy configuration.
Installation
- Please familiarize yourself with the concepts of Zigbee Networking with the
“Understanding Sensor Networking” paper.
- The network Coordinator and any Routers must be set up before setting up this
sensor.
- Open the battery compartment and pull out the battery activation tab. The blue
LED should flash briefly indicating successful power up. The green LED will
blink rapidly for about 15 seconds while the sensor detection circuitry stabilizes.
Close up the unit.
- For a wheeled bed leg
o attach (place in and twist) one of the mounting plates with no serrated
teeth onto the sensor head.
o mount the sensor head in the supplied castor cup adaptor with the black
plastic side facing up (the side with the attached mounting plate face down)
o Place the castor cup under the wheel
o Use the supplied Velcro strap to attach the sensor body to the bed, out of
the way of vacuum cleaners, etc.
- For a wood chair/bed leg
o attach one of the toothed mounting plates to the bottom of the chair leg
using the supplied screw
o attach the sensor head to the mounting plate (push in and twist)
o Use the supplied Velcro strap to attach the sensor body to the leg, out of
the way of vacuum cleaners, etc.
- For a metal chair/bed leg
o clean the bottom of the leg
o attach one of the non-toothed mounting plates to the bottom of the leg
using the supplied double-sided tape.
o attach the sensor head to the mounting plate (push in and twist)
o Use the supplied Velcro strap to attach the sensor body to the leg, out of
the way of vacuum cleaners, etc.
- Once the unit is mounted, with no one occupying the furniture, press the
multifunction button. Each time the button is pressed the unit will Tare (zero).

Summary of content (4 pages)