RTK Rover/Portable Base Quick Start Guide Version 1.
To Users Dear user, thank you for choosing XAG products. For safety reasons and the best experience possible, XAG recommends that you read through the User Manual and Disclaimer in this document before attempting to use the RTK4 Rover/Portable Base. Contact Us If you have any questions about this document, please contact our Technical Support via email: info@ xa.
List of Items (Rover) Before unpacking and using the product, please carefully check if it contains all the items listed below. Please contact XAG™ or your dealer if there are any missing items. The components of the rover are packed in 2 boxes.
List of Items (Portable Base) Before unpacking and using the product, please carefully check if it contains all the items listed below. Please contact XAG™ or your dealer if there are any missing items. The components of the portable base are packed in 4 boxes.
Getting to Know the Rover The RTK4 Rover is comprised of the RTK Positioning Module for Agricultural Use ( Mushroom Head) and RTK Smart Battery. In specific: 1 3 4 2 1 RTK Positioning Module for Agricultural Use ( Mushroom Head) 2 RTK Smart Battery 3 RTK Smart Battery Console including Battery Level Indicators, Power Button, Type-C Charge Port 4 Antenna Note The RTK4 Rover and RTK4 Portable Base are the same in terms of functional definition, despite some differences in structural components. www.xa.
Assembling the Rover 2 1 1 Connect the Mushroom Head with the pole from top. 2 Rotate the tightening ring to lock the smart battery with the Mushroom Head to complete the assembly. 4 www.xa.
Getting to Know the Portable Base The RTK4 Portable Base is comprised of the RTK Positioning Module for Agricultural Use ( Mushroom Head), RTK Smart Battery, Triangle Stand, and Tripod. 1 5 6 2 3 4 1 RTK Positioning Module for Agricultural Use (Mushroom Head) 2 RTK Smart Battery (Pole) 3 Triangle Stand 4 Tripod 5 RTK Smart Battery Console: including Battery Level Indicators, Power Button, Type-C Charge 6 Antenna www.xa.
Assembling the Portable Base 1 1 Connect the Mushroom Head with the pole from 2 top. 2 Rotate the tightening ring to lock the smart battery with the Mushroom Head. 3 Place the Triangle Stand on top of the Tripod as shown. 4 Tighten the fixing bolts on the Triangle Stand to secure the Triangle Stand with the Tripod. 5 Insert the Rover assembled in Step 2 from top into the spacing hole and close the buckle to complete the assembly. 5 4 3 6 www.xa.
RTK Smart Battery Console The RTK Smart Battery has a built-in 6600mAh/14.8V lithium battery. The pole is integrated with a battery level/status display panel (see right figure), a power button, and a Type-C charge port. The functions of the button/indicator lights are defined as follows: (Battery) Status Indicator (Battery) Battery Level Indicators • Battery ON/OFF ON: The battery will be powered on after 2 long presses.
•Checking Battery Status (Red Power Indicator) Once the battery is ON, its status will be displayed on the console. Battery statuses are defined as follows: Battery Level LED Status RED LIGHT ON Normal RED QUICK FLASH PCB Overheated RED SLOW FLASH PCB Low Temperature RED DOUBLE FLASH Battery Malfunction. Please contact customer/technical support. •Charging Battery The battery can be charged when it is either ON* or OFF.
Console of the RTK Positioning Module Button The Console of RTK Positioning Module for Agricultural Use is composed of three function buttons and three corresponding indicator lights in different colors (see right figure). The functions of the button/indicator lights are defined as follows: Status Indicator • Checking Operation Status Battery Level LED Warning/Alert Status RED LIGHT ON Normal RED SLOW FLASH WLAN under initialization (about 30 seconds). RED QUICK FLASH Beep Voltage lower than 12.
• Activating BOOT Mode 1: When the module is OFF, press and hold F3 to power on*. 2: If the buzzer beeps for three times, then the red light flashes slowly for 30 seconds (WLAN initialization) before flashing quickly, and the remaining indicators are off (see figure on right), it means BOOT mode is activated. Otherwise, BOOT mode is not activated.
Technical Specifications RTK Positioning Module for Agricultural Use Dedicated 2.4GHz WLAN Antenna Gain: 2dBi Model: XRTK4 Dimensions: Diameter × Height: 154×83.6 mm (machine) D iameter × Height: 154×1230 mm (machine + battery) Weight: ＜ 1.5 Kg (machine) Port/Panel: B utton × 3, Positioning Indicator × 1 Networking Indicator × 1, Power Indicator × 1 Protection Grade: IP65 Operating Temperature: -20° - 60° C Transmission performance Frequency range: 2.400-2.
Disclaimer 1. Please read this document carefully before using this product. This Disclaimer has an important impact on the safe use of the product and your legitimate rights and interests. The use of the product shall be deemed as you have known, understood, acknowledged, and accepted all terms and contents of this document. 2. This product is not a toy, and is not suitable for people under the age of 18.
FCC/ISEDC Compliance Notice This device complies with Part 15 of the FCC Rules and ISEDC licence-exempt RSS standard.. Operation is subject to the following two conditions: (1)This device may not cause harmful interference, and (2) This device must accept any interference received,including interference that may cause undesired operation. Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Le non-respect des restrictions ci-dessus peut entraîner une violation des consignes d'exposition aux RF. EU Compliance Statement:Guangzhou Xaircraft Technology CO.,LTD.All Rights Reserved. hereby declares that this device is in compliance with the essential requirements and other relevant provisions of the RED Directive.
FCC Supplier’s Declaration of Conformity Brand name / model number: XRTK4 This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Suppliers Name (USA) : HOMELAND SURVEILLANCE AND ELECTRONICS LLC Suppliers Address (USA) : 122 LIVE OAKS BLVD.
info@xa.com @XAGofficial @XAG_official @XAG Official This Manual is subject to upgrade without prior notice. ©Guangzhou Xaircraft Technology CO.,LTD.All Rights Reserved. All information of this User Manual (including but not limited to any text description, illustrations, photos, methods and processes, etc.) belongs to XAG Co., Ltd. and is protected by copyright law.
