d TERMINAL PAYMENT CRADLE CRADLE TERMINAL PAYMENT XC60-E INSTALLATION GUIDE
1. Package Content XC60 Power adaptor 2.
BACK AREA FRONT AREA SIDE AREA 1 COM1 2 COM2 3 USB Host 4 LAN 5 Charging Contact 6 Status LED 7 DC JACK ■ XC60 Power spec: Input: 12V DC, 3A ■ Power Adapter spec: Input: 100 ~240 ac Output: 12V DC, 3A min Operating Temperature: 0oC to 40oC 3.
. LED Behaviors Insert Power adapter and device will power up, there is a LED status: Location: Top right corner (Figure 5) Figure 5 Blinking Red - System update process Solid Red - System errors and can’t operation Solid Orange – System power on Solid Green – System power on and under connection Blinking Green – System power on and in idle mode 5. Connect with xCL_AT-150/xCL_AT-100 Place xCL_AT-150/xCL_AT-100 on the XC60 for charging and as Figure 6.
FEDERAL COMMUNICATION COMMISSION INTERFERENCE STATEMENT This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
XAC Automation Corporation 886-3-577-2738 www.xac.com.tw The above information is the exclusive intellectual property of XAC Automation Corporation and shall not be disclosed, distributed or reproduced without permission of XAC Automation Corporation. XAC AUTOMATION CORP. shall not be held liable for technical and editorial omissions or errors made herein; nor for incidental or consequential damages resulting from the furnishing, performance or use of his material.