"4-IN-1” EMV L1 & L2 PIN PAD INSTALLATION GUIDE 8006L2-3CR POE/USB/RS232
1. POWER ON THE 8006 PIN PAD There are three model of communication interface for 8006L2-3CR: USB interface cable, RS232 interface cable, POE interface cable. ¾ POE interface cable: There is a fixed POE interface cable at the top end of 8006 device as Figure 1 for power and communication connection to the terminal or PC. POE interface cable can supply the power by two options below Figure 1 a.
Figure 7 Figure 8 Caution: The cover (Figure 7) shall be provided with a means to keep it closed during normal operation. 3. 8006 PIN PAD DEVICE READY The unit automatically starts up when connected the power on Ethernet cable. Upon startup, the PIN Pad device displays the default screen as Figure 9. Figure 9 4. USING THE CARD READER ¾ M agnetic Stripe Reader Find the card reader slot at the right side of PIN Pad. Slide the card in either direction through the slot without stopping.
6. CLEANING Periodically clean the PIN Pad device with a clean cloth dampened with water and a mild soap or cleaner. Do not use harsh chemicals. 7. RETURNING THE PIN PAD DEVICE If you need to return your PIN Pad device for service or replacement, contact your service provider or sales representative for instructions. Note: Do not try to service, repair or adjust the PIN Pad device in any other w ay; doing so will void your warranty.