PINPAD D 8006L1-1 1CRA SER RIES INSTTALLATIO ON GUIDE E
1. CONNECTING THE 8006L1-1CRA PIN PAD The 8006L1-1CRA device can be used to connect with PC/ terminal. It supports RS232, USB interfaces via different cable types such as DB9 (Figure 1) and standard USB (Figure 2) connector. Input voltage/ current: 5V/ 500mA for 8006L1-1CRA USB or 12V/ 500mA for 8006L1-1CRA DB9 AC adapter for DB9: HON-KWANG ELECTRIC Co.,LTD HK-AX-120A200-EU Input: 100-240Vac/ 0.8A, 50/ 60Hz. Output: 12V/ 2.
. USING THE PIN PAD Press numeral key to enter password if needed. Then press green [ENTER] key to finish password key-in. Press red [CANCEL] key to exit from presently status (Figure 7). Note: If the PIN is entered incorrectly, press [CANCEL] and re-enter it. Figure 7 4. INSTALLING THE PRIVACY SHIELD The privacy shield is installed on the device, and the keypad will be separated from the LCD. (Figure 8) Figure 8 5.
Industry Canada statement: This device complies with RSS-210 of the Industry Canada Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Ce dispositif est conforme à la norme CNR-210 d'Industrie Canada applicable aux appareils radio exempts de licence.