AVANTEK Wireless Doorbell Kit User Manual
Congratulations on your purchase of our product. To ensure proper use and trouble-free operation, please carefully read this user manual first. Introduction This wireless doorbell kit includes one CR2032 lithium battery operated transmitter and two plug-in receivers. It features 52 classic melodies with an adjustable volume control to meet your needs. This wireless doorbell kit is a great addition to any home as it is easy to set up and operate.
Products Profile Features 1. 2. Extreme low power consumption and a 3-year battery life (10-15 uses a day). Easy to set up with simple to push buttons. 3. 52 optional melodies; easy to choose between the next and previous melodies; built-in 1.6 in (40 mm) stereo speaker delivers rich and crisp sound. Uses a power chip from American Power Integrations, offering a reliable maximum of 250 mA current. 4. 5. 6.
1. Draw 2 marks according to the mounting slots on the mounting bracket. 2. Drill holes at the 2 marks and screw the bracket to the wall with the included anchor plugs and screws. 3. Align the transmitter with the bracket and rotate the transmitter clockwise to fasten tightly. Notes 1. For optimal transmission, keep as few obstacles between the transmitter and receiver as possible. 2.
3. Place the new cell battery in the silicon casing, matching the polarity (+) inside the battery compartment. 4. Reinstall the transmitter. Notes 1. 2. Be sure to keep the correct polarity (+) when replacing the cell battery. Make sure the battery is placed in the silicon casing before installing it into the battery compartment. Troubleshooting Problem Cause Solution The indicator on the transmitter does not light up. The battery insulating film has not been peeled off.
Disposal This product must not be disposed of as household waste. Dispose of the device at an authorized collection point for the recycling of electrical appliances.