X-Micro Digital MP3 Player User Manual
Copyright Copyright 2004 by X-Micro Technology Corp., All rights reserved. No part of this publication may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language or computer language, in any form or by any means, electronic, mechanical, magnetic, optical, chemical, manual or otherwise, without the prior written permission of X-Micro Technology Corp. Disclaimer X-Micro Technology Corp.
CONTENT Introduction 1 1.1 Product overview 1 1.2 Package contents 1 1.3 The characters of X-Micro Digital MP3 Player 1 1.4 The index parameter 2 1.5 The system requirement of X-Micro Digital MP3 Player 2 Installation guide of X-Micro Digital MP3 Player 3 2.1 Windows 98 operation system 3 2.2 Windows Me/2000/XP operation system 5 2.3 MAC OS 9.X operation system 6 2.4 Linux 2.4 core operation system . 6 Uninstall X-Micro Digital MP3 Player 7 3.
Introduction 1.1 Product Overview Hold switch: for holding all function keys Volume -: for down the volume Volume +:for up the volume Power ON / Play / Pause / Stop / Power OFF key : for Power ON / Play / Pause / Stop / Power OFF control Prev /mode / Next key: the key for enter menu and for next&prev select. 1.2 Package Contents The package should include the following accessories. Please contact the dealer if any of the listed items are missing from the package.
◆ ◆ ◆ ◆ 1.4 Support changing the contrast and EL display time of LCD displaying. Can be used as a mass storage device. Support series play modes and A-B replaying. Can resume the playing state before turn off. The index parameter Index Parameter specification Hard disk IBM PC, compatible PC, notebook with USB interface Interface Universal Serial Bus 1.0/1.1 Storage medium Flash EMS memory Power Supply by USB interface without connect power, when play songs, need 1xAAA Transfer speed Max.
Installation Guide of X-Micro Digital MP3 Player When the MP3 Player is connected to computer, the LCD will show the following picture: And when the MP3 Player is writing & reading data, the LCD will show the following graphic: You should not disconnect the MP3 Player from the PC while it’s reading or writing, or else it will cause your data lost. 2.1 Windows98 Operation System Under win98, this installation will install the driver & Tools for the player. 1) Put the driver CD into CD-ROM.
4) Click the Finish button; it will pop up a window as the follow. 5) 6) Click the button Finish and the system will restart. After the system is rebooted, insert the player into the USB port and a “Removable disk” symbol will appear. That means you can use X-Micro Digital MP3 Player as a hard disk.
2.2 Windows Me/2000/XP Operation System Under win2000/XP, the installation will only setup the tools for the MP3 player. 1） Put the driver CD into CD-ROM. 2） An autorun interface will appear, click the Installation ICON and the follow window will appear: 3） Click the Next button and follow the install wizard steps, the follow window will appear: 4） Click the Finish button; it will install the tools completely. Insert the X-Micro Digital MP3 Player directly to your computer’s USB interface.
2.3 MAC OS 9.X Operation System Insert X-Micro Digital MP3 Player directly to your computer’s USB interface. The system will recognize it automatically and meanwhile there is a driver symbol “Untitled” appears on the desktop. And you can use it like usual ones. 2.4 Linux2.4 core Operation System For Linux system, you should use it as these steps: 1) Boot your computer, login as root. 2) Plug Player into USB interface of the computer.
Uninstall X-Micro Digital MP3 Player 3.1 Uninstall in Windows98 1) Hardware uninstall: When you complete the using of X-Micro Digital MP3 Player, you can pull it out from the USB interface if only the indicator light stops glinting. And the symbol of “Removable Disk” will disappear automatically.
3) 4) Click “Stop” Click “OK” when the system indicates “USB Mass Storage Device equipment can be removed safely from the system”, and then you can pull out the X-Micro Digital MP3 Player safely. 3.3 Uninstall in MAC OS 9.
Functions and guide In the menu mode, the mode key is for conform a selection and for enter or return to the submenu. 4.1 Power ON / OFF Press “Power on/Play/pause/Stop/Power off “( ) button 2-3sec to turn on. Press “Power on/Play/pause/Stop/Power off” ( ) button 3-5sec to turn off while playing. In the standby mode, the player will shut down automatically when the machine is not being operated for 30 seconds. 4.
In the play mode, press the mode key to enter the play menu and choose the Equalizer Select item, see the following illustration: Press mode key to enter EQ setting mode, as in the following illustration: The Equalizer has 7 EQ modes (Jazz, Rock, Classic, Pop, Soft, DBB and Natural). You can change the EQ mode by using the “ ”or “ ” key. 44..
Note: If the machine is power off and locked, before you power on the machine, you should unlock it. 44..88 M Maaiinn M Meennuu You can press Mode key for 3-5 seconds to enter the main menu anytime. This menu contains 5 items. Press “ ”or “ ”to select the menu item, see illustration: Enter the music directory to play MP3/WMA files,. Select this item to enter record mode. Select this item to enter the voice directory where you can play voice recording files.
Change the back light time of the device. You can change the back light lamp time from 0 to 30 seconds, increments of 5 seconds. When you select the back light lamp time of 0 seconds, the back light will not activate if you press any key. Enable you to set the system language of the MP3 Player. With this item you can set the power off time or sleep time when there is no signal to the player. Using increments of 5 seconds you can change the two item’s time from 0 to 60 seconds.
press Next / Prev key, and then press the Play key, you can begin recording. You will observe the following picture: To pause recording please press the “ ” button, see the following illustration: To continue recording, please press the “ ” button again. After recording is complete, press “ ” button 4-5 seconds to save the recording files, the LCD will indicate a graphic file is building like this: The recorded file is saved as “REC**.WAV” or “REC**.ACT” in the Voice Folder.
When you select this item it will enter a file select interface, use “ ”or “ ”to select yes or no and use mode key to confirm your selection you can delete the current MP3 file. And you can use the play key to cancel you delete operation. When you select this item it will enter a file select interface, use “ ”or “ ”to select yes or no and use mode key to confirm your selection you can delete all MP3 files in this machine. Exit the file file system operate mode. 44..
[00:47.54]Once in a lifetime, [00:53.17]Lost in your beauty, [00:58.99]Still dreaming of you, [01:05.32]Angel's tale. [01:12.58]You drove the sinner from me, [01:19.57]And shone with such glary, ………………………………… [04:49.74] make: xxy 2004.2.6 NOTE : Use Word Pad tool to edit, then save the file after finishing editing, choose ALL FILES in file type, the file extension name must be *.lrc in the saving dialog box. File Name: XXX.lrc (please make sure to put .
3. When you select the format tool, the following will appear and give you these options: Drive: where you can select the drive volume you want to format Volume: the device’s volume when you change to the string you input for this item. Quick: when you select this item it will do a quick format for the device. Full: when you select this item it will do a full format for the device. Low: when you select this item it will do a low format for the device.
3. Press the Open button and an explorer windows will appear. Select the file you want to open. 4. If the file you opened is an MP3 or Wav file, you can use this tool to play it. 5. If the file you opened is a REC/RED/ACT file, you can use this tool to transform it to a wav file. 4.15.3 Use the Firmware Update tool: This tool is used for update the firmware of your MP3 Player. 1. Open the Firmware update Tool. 2.
SSaaffeettyy PPrreeccaauuttiioonn See following precautions. Any violation of one or more of the following precautions may cause damage to the player and will void the warranty. - Please take out the battery when you will not use the machine for a long time. - Conform that the lock switch is unlocked before you turn on the unit. - Avoid exposure to heat, moisture and static electricity. - Do not drop or place heavy objects on the player. - Vibration or shock to the unit can cause damage.
FFA AQ Q 66..11 TThhee ppllaayyeerr ddooeess nnoott ttuurrnn oonn:: - Check if the player has the batteries installed. - Turn on your computer, connect the player to the USB port and turn on the player. - If the above step does not resolve the problem, then do a “Firmware upgrade” and format the player, you can find and download the firmware from our website. 66..22 LLC CD D ddiissppllaayy ddooeess nnoott sshhoow w aannyytthhiinngg:: - Press the Play/Pause button to turn on the player.
www.x-micro.
