User's Manual

ManualsBrandsX-Micro Technology ManualsElectronicsX-Micro WLAN 11b Boardband Router

USER’S MANUAL OF X-MICRO WLAN BROADBAND ROUTER Version: 1.2

be assign a IP address from the range.

Show Client

Click to open the Active DHCP Client Table window that

shows the active clients with their assigned IP address,

MAC address and time expired information.

802.11d Spanning Tree

Select to enable or disable the IEEE 802.1d Spanning

Tree function from pull-down menu.

Clone MAC Address

Fill in the MAC address that is the MAC address to be

cloned.

Clone MAC address is designed for your special

application that request the clients to register to a server

machine with one identified MAC address.

Since that all the clients will communicate outside world

through the X-Micro WLAN Broadband Router, so have

the cloned MAC address set on the X-Micro WLAN

Broadband Router will solve the issue.

Apply Changes

Click the Apply Changes button to complete the new

configuration setting.

Reset

Click the Reset button to abort change and recover the

previous configuration setting.

3.3.7 WAN Interface Setup

This page is used to configure the parameters for wide area network that connects

to the WAN port of your X-Micro WLAN Broadband Router. Here you may

change the setting for IP address, PPPoE and DNS, etc.

Screenshot – WAN Interface Setup - 1

Summary of content (18 pages)

PAGE 1
USER’S MANUAL OF X-MICRO WLAN BROADBAND ROUTER Version: 1.2 be assign a IP address from the range. Click to open the Active DHCP Client Table window that shows the active clients with their assigned IP address, MAC address and time expired information. 802.11d Spanning Tree Select to enable or disable the IEEE 802.1d Spanning Tree function from pull-down menu. Clone MAC Address Fill in the MAC address that is the MAC address to be cloned.
PAGE 2
USER’S MANUAL OF X-MICRO WLAN BROADBAND ROUTER Version: 1.2 Screenshot – WAN Interface Setup - 2 Item Attain IP Automatically (DHCP) Fixed IP IP Address Subnet Mask Default Gateway PPPoE User Name Password Connection Type Description Click to select DHCP support on WAN interface for IP address assigned automatically from a DHCP server. Click to select fixed IP support on WAN interface. There are IP address, subnet mask and default gateway settings need to be done.
PAGE 3
USER’S MANUAL OF X-MICRO WLAN BROADBAND ROUTER Idle Time Attain DNS Automatically Set DNS Manually DNS 1 DNS 2 DNS 3 Apply Changes Reset Version: 1.2 connection through PPPoE protocol whenever this XMicro WLAN Broadband Router is powered on.
PAGE 4
USER’S MANUAL OF X-MICRO WLAN BROADBAND ROUTER Version: 1.2 Screenshot – Firewall - Port Filtering Item Enable Port Filtering Port Range Protocol Comments Apply Changes Reset Delete Selected Delete All Reset Description Click to enable the port filtering security function. To restrict data transmission from the local network on certain ports, fill in the range of start-port and end-port, and the protocol, also put your comments on it. The Protocol can be TCP, UDP or Both.
PAGE 5
USER’S MANUAL OF X-MICRO WLAN BROADBAND ROUTER Version: 1.2 Screenshot – Firewall - IP Filtering Item Enable IP Filtering Local IP Address Protocol Comments Apply Changes Reset Delete Selected Delete All Reset Description Click to enable the IP filtering security function. To restrict data transmission from local network on certain IP addresses, fill in the IP address and the protocol, also put your comments on it. The Protocol can be TCP, UDP or Both.
PAGE 6
USER’S MANUAL OF X-MICRO WLAN BROADBAND ROUTER Version: 1.2 Screenshot – Firewall - MAC Filtering Item Enable MAC Filtering MAC Address Comments Apply Changes Reset Delete Selected Delete All Reset Description Click to enable the MAC filtering security function. To restrict data transmission from local network on certain MAC addresses, fill in the MAC address and your comments on it. Comments let you know about whys to restrict data from the MAC address.
PAGE 7
USER’S MANUAL OF X-MICRO WLAN BROADBAND ROUTER Version: 1.2 Screenshot – Firewall - Port Forwarding Item Enable Port Forwarding IP Address Protocol Port Range Comment Apply Changes Reset Delete Selected Delete All Reset Description Click to enable the Port Forwarding security function. To forward data packets coming from WAN to a specific IP address that hosted in local network behind the NAT firewall, fill in the IP address, protocol, port range and your comments. The Protocol can be TCP, UDP or Both.
PAGE 8
USER’S MANUAL OF X-MICRO WLAN BROADBAND ROUTER Version: 1.2 unauthorized access to its local private network. Typically, the DMZ host contains devices accessible to Internet traffic, such as Web (HTTP ) servers, FTP servers, SMTP (e-mail) servers and DNS servers. Screenshot – Firewall - DMZ Item Description Click to enable the DMZ function. Enable DMZ DMZ Host IP Address To support DMZ in your firewall design, fill in the IP address of DMZ host that can be access from the WAN interface.
PAGE 9
USER’S MANUAL OF X-MICRO WLAN BROADBAND ROUTER Version: 1.2 Screenshot – Statistics Item Wireless LAN Sent Packets Wireless LAN Received Packets Ethernet LAN Sent Packets Ethernet LAN Received Packets Ethernet WAN Sent Packets Ethernet WAN Received Packets Refresh Description It shows the statistic count of sent packets on the wireless LAN interface. It shows the statistic count of received packets on the wireless LAN interface. It shows the statistic count of sent packets on the Ethernet LAN interface.
PAGE 10
USER’S MANUAL OF X-MICRO WLAN BROADBAND ROUTER Version: 1.2 Screenshot – Upgrade Firmware Item Select File Upload Reset Description Click the Browse button to select the new version of web firmware image file. Click the Upload button to update the selected web firmware image to the X-Micro WLAN Broadband Router. Click the Reset button to abort change and recover the previous configuration setting. 3.3.
PAGE 11
USER’S MANUAL OF X-MICRO WLAN BROADBAND ROUTER Version: 1.2 Screenshot – Save/Reload Settings Item Save Settings to File Load Settings from File Reset Settings to Default Description Click the Save button to download the configuration parameters to your personal computer. Click the Browse button to select the configuration files then click the Upload button to update the selected configuration to the X-Micro WLAN Broadband Router.
PAGE 12
USER’S MANUAL OF X-MICRO WLAN BROADBAND ROUTER Version: 1.2 Screenshot – Password Setup Item User Name New Password Confirmed Password Apply Changes Reset Description Fill in the user name for web management login control. Fill in the password for web management login control. Because the password input is invisible, so please fill in the password again for confirmation purpose. Clear the User Name and Password fields to empty, means to apply no web management login control.
PAGE 13
USER’S MANUAL OF X-MICRO WLAN BROADBAND ROUTER Version: 1.2 4 Frequently Asked Questions (FAQ) 4.1 What and how to find my PC’s IP and MAC address? IP address is the identifier for a computer or device on a TCP/IP network. Networks using the TCP/IP protocol route messages based on the IP address of the destination. The format of an IP address is a 32-bit numeric address written as four numbers separated by periods. Each number can be zero to 255. For example, 191.168.1.254 could be an IP address.
PAGE 14
USER’S MANUAL OF X-MICRO WLAN BROADBAND ROUTER Version: 1.2 to the wired LAN for services (file servers, printers, Internet links) they will operate in infrastructure mode. Example 1: wireless Infrastructure Mode Ad hoc mode (also called peer-to-peer mode or an Independent Basic Service Set, or IBSS) is simply a set of 802.11 wireless stations that communicate directly with one another without using an access point or any connection to a wired network.
PAGE 15
USER’S MANUAL OF X-MICRO WLAN BROADBAND ROUTER Version: 1.2 4.7 What are potential factors that may causes interference? Factors of interference: ¾ Obstacles: walls, ceilings, furniture… etc. ¾ Building Materials: metal door, aluminum studs. ¾ Electrical devices: microwaves, monitors and electrical motors. Solutions to overcome the interferences: 9 Minimizing the number of walls and ceilings. 9 Position the WLAN antenna for best reception.
PAGE 16
USER’S MANUAL OF X-MICRO WLAN BROADBAND ROUTER Version: 1.2 fragments each of size equal to fragment threshold. By tuning the fragment threshold value, we can get varying fragment sizes. The determination of an efficient fragment threshold is an important issue in this scheme. If the fragment threshold is small, the overlap part of the master and parallel transmissions is large. This means the spatial reuse ratio of parallel transmissions is high.
PAGE 17
USER’S MANUAL OF X-MICRO WLAN BROADBAND ROUTER Version: 1.2 stations to establish and maintain communications in an orderly fashion. Beacon Interval represents the amount of time between beacon transmissions. Before a station enters power save mode, the station needs the beacon interval to know when to wake up to receive the beacon (and learn whether there are buffered frames at the access point). 4.13 What is Preamble Type? There are two preamble types defined in IEEE 802.11 specification.
PAGE 18
75-115100-01