User Guide 4-Port SuperSpeed USB 3.0 PCIe Adapter Model No.: XM-UB3204 For the most up-to-date information, please visit www.x-mediausa.com Version 3.
4-Port SuperSpeed USB 3.0 PCIe Adapter Contents Package Contents ........................................................................................................... 3 Chapter 1 Product Overview …….………………….….……………………….………………………… 3 1.1 Introduction ……………………….…………………………………….………………….. 3 1.2 Features …….………………….….…..……………………………………………………… 3 Chapter 2 Installation Guide ………………..…………………………………………..………………….. 4 2.1 Hardware Installation ………………………..……….……………………..………….. 4 2.2 Software Installation …………………….
4-Port SuperSpeed USB 3.0 PCIe Adapter Package Contents The following items should be found in the package: Note: XM-UB3204 PCIe Adapter SATA Female to 4-pin power cable Driver & Utility CD with User Guide The above list is for reference only. you purchased. The actual content may differ according to the product Please save the original packaging material for future reference. If any of the listed items are damaged or missing, please contact with your seller.
-Port SuperSpeed USB 3.0 PCIe Adapter Chapter 2 Installation Guide 2.1 Hardware Installation To Install the Adapter, please follow these steps listed below: 1. Turn off your computer and unplug the power cord and all cables 2. Remove your computer’s case cover 3. Locate an available PCI Express slot 4. Remove the screw that secures the slot bracket (the small piece of metal that covers the opening for PCI Express Adapter on the back panel of your computer), then remove the slot bracket 5.
4-Port SuperSpeed USB 3.0 PCIe Adapter 2. Click “Next” to continue. 3. Click “License Agreement” and then click ”I Agree” to enter next step. 4. Click “Next” to start the driver installation.
4-Port SuperSpeed USB 3.0 PCIe Adapter 5. Select ”VIA XHCI Host Controller Driver” and click “NEXT”. 6. To check the driver installation status. 7. The dialogue will show you if the components of the driver is installed successfully.
4-Port SuperSpeed USB 3.0 PCIe Adapter 8. After installation, please click “Finish”. To verify successful installation in Windows: From the main desktop, click on “My Computer”, then double-click on “Control Panel”, “System”, and “Device Manager”, and “Universal Serial Bus controllers” to “NEC Electronics USB3.0 Host Controller”.