User Guide Gigabit PCI/PCIe Network Adapter Model No.: XM-NA3500 XM-NA3800 For the most up-to-date information, please visit www.x-mediausa.com Version 1.
Gigabit PCI/PCIe Network Adapter Contents Package Contents ........................................................................................................... 3 Chapter 1 Product Overview …….………………….….……………………….………………………… 1.1 Introduction ……………………….…………………………………….………………….. 1.2 Features …….………………….….…..……………………………………………………… 1.3 LED Status …….…………………………..………………………..….……………………. 3 3 4 4 Chapter 2 Installation Guide ………………..…………………………………………..………………….. 4 2.1 Hardware Installation ………………………..……….
Gigabit PCI/PCIe Network Adapter Package Contents The following items should be found in the package: Note: XM-NA3500 Gigabit PCI Network Adapter or XM-NA3800 Gigabit PCIe Network Adapter Low profile bracket One CD Disk contains Drivers and User Guide The above list is for reference only. The actual content may differ according to the product you purchased. Please save the original packaging material for future reference.
Gigabit PCI/PCIe Network Adapter 1.2 Features Fully complies with IEEE 802.3, 802.3u, 802.3ab standards Support IEEE 802.1p Layer 2 Priority Encoding; IEEE 802.
Gigabit PCI/PCIe Network Adapter 2.2 Software Installation This section will guide you through the installation procedures for Windows 7. Please follow the steps. 2.2.1 For Windows 7 Installation 1. Insert the CD driver disk into CD-ROM drive. The Autorun setup program will display, or you click on the “Browse CD” to find other OS drivers in the CD. 2. Click Driver Installation button to install. 3. Restart Windows to complete the installation.
Gigabit PCI/PCIe Network Adapter Figure 2.2 4. The Update Driver Software window will show up. Select Browse my computer for driver software. Figure 2.3 5. Browse and choose the system driver location from Computer, and then click Next.
Gigabit PCI/PCIe Network Adapter Figure 2.4 6. Wait a few seconds for the installation. Figure 2.5 7. Click Close to finish the installation. Figure 2.
Gigabit PCI/PCIe Network Adapter Appendix A: Specification Specifications: Standards: IEEE 802.3, 802.3u, 802.3ab, 802.3x, 802.1q, 802.1p Interface: 32-bit PCI or PCIe Standards 1*10/100/1000Mbps RJ-45 port Data Transfer Rate: 10/100/1000Mbps for Half-Duplex mode 20/200/2000Mbps for Full-Duplex mode Network Media: 10Base-T: UTP Cat. 3, 4, 5, cable (Maximum 100m) EIA/TIA-568 100Ω STP (Maximum 100m) 100Base-TX: UTP Cat.