Quick Start Guide

QUICK START GUIDE
Wyze Chime
IN THE BOX
Wyze Chime
Quick Start Guide
x 1
x 1
Solid blue light
Successful connection
Flashing blue light
On connection
Solid yellow light
Unconnected
LIGHT INDICATIONS
2
Open the Wyze app, select an
installed doorbell, and in the
device page, select Device
Settings → Extended Devices →
Add Device. Follow the instruction
to finish installation.
3
Connect multiple Wyze chime
devices,please repeat the steps2.
Notice: 1. Wyze Chime can connect to
Wyze Video Doorbell. Please refer to the
Wyze Video Doorbell manual for details.
SETUP
1
Setup Button
2
Status Light
3
Speaker
WDBC1-KSZP01 V2.0 正面
WDBC1-KSZP01 V2.0
背面
叮咚器
105g无光铜
先风琴折，再对折曹佳丽
产品名
PANTONE Cool Gray 9C+CMYK
2020.04.01
V1.0 首次创建
2022.05.09
V2.0 首次创建
修改FCC和IC警示语
品牌
40×40mm
型号:WDBC1
规格:WDBC1-
KSZP01 V2.0
物料编码:
FCC Compliance
Statements
Resources & Support
support.wyze.com
Community
forums.wyze.com
NEED HELP?
Scan the QR code
to learn more
1
4
5
11 109
6 7 8
3
2
1
Insert Wyze Chime into an
outlet.
This device complies with Part 15 of the
FCC Rules. Operation is subject to the
following two conditions: (1) this device
may not cause harmful interference,
and (2) this device must accept any
interference received, including
interference that may cause undesired
operation.
Note: This equipment has been tested
and found to comply with the limits for a
Class B digital device, pursuant to Part
15 of the FCC Rules. These limits are
This device contains licence-exempt
transmitter(s)/receiver(s) that comply
with Innovation, Science and Economic
Development Canada’ s
ISED Compliance
Statements
designed to provide reasonable
protection against harmful interference
in a residential installation. This
equipment generates, uses and can
radiate radio frequency energy and, if
not installed and used in accordance
with the instructions, may cause harmful
interference to radio communications.
However, there is no guarantee that
interference will not occur in a particular
installation.
If this equipment does cause harmful
interference to radio or television
reception, which can be determined by
turning the equipment o and on, the
user is encouraged to try to correct the
interference by one or more of the
following measures:
-- Reorient or relocate the receiving
antenna.
-- Increase the separation between the
equipment and receiver.
-- Connect the equipment into an
outlet on a circuit dierent from that to
which the receiver is connected.
-- Consult the dealer or an experienced
radio/TV technician for help.
Caution: Changes or modifications not
expressly approved by the party
responsible for compliance could void
the user’ s authority to operate the
equipment.
This equipment complies with FCC
radiation exposure limits set forth for an
uncontrolled environment. This
equipment should be installed and
operated with minimum distance 20cm
between the radiator and your body.
licence-exempt RSS(s). Operation is
subject to the following two conditions:
(1 )This device may not cause
interference. (2)This device must accept
any interference, including interference
that may cause undesired operation of
the device.
L’ émetteur/récepteur exempt de
licence contenu dans le présent
appareil est conforme aux CNR
d’ Innovation, Sciences et Développe-
ment économique Canada applicables
aux appareils radio exempts de licence.
L’ exploitation est autorisée aux deux
conditions suivantes: (1)L’ appareil ne
doit pas produire de brouillage;
(2)L’ appareil doit accepter tout
brouillage radioélectrique subi, même si
le brouillage est susceptible d’ en
compromettre le fonctionnement.
This equipment complies with IC
RSS-102 radiation exposure limits set
forth for an uncontrolled environment.
This equipment should be installed and
operated with minimum distance 20cm
between the radiator and your body.
Cet équipement est conforme aux
limites d'exposition aux radiations IC
CNR-102 établies pour un environnement
non contrôlé. Cet équipement doit être
installé et utilisé avec une distance
minimale de 20cm entre le radiateur et
votre corps.