Installation Guide

NOTES: QUICK START GUIDE

I’ve attached a draft of the Quick Start Guide for Model WT9450XE. The final edition will be the same as

this document, except for the following modifications:

• Photographs on pages 1 and 2 will be replaced with those of Model WT9450XE.

• Back Panel Connectors chart on page 2 will be updated.

The existing text, including the Power Source information and the ferrite bead installation instructions, will

remain in the WT9450XE Quick Start Guide.

PAGE 1
NOTES: QUICK START GUIDE I’ve attached a draft of the Quick Start Guide for Model WT9450XE. The final edition will be the same as this document, except for the following modifications: • Photographs on pages 1 and 2 will be replaced with those of Model WT9450XE. • Back Panel Connectors chart on page 2 will be updated. The existing text, including the Power Source information and the ferrite bead installation instructions, will remain in the WT9450XE Quick Start Guide.
PAGE 2
Winterm™ Model 9450XE XPE-Based Terminal Quick-Start Guide ➊ Connect – Caution: Improper connection, mounting, or use of this product could result in component failure and/or flash memory corruption. Read the following caution statements before setting up and operating the terminal. Cautions: Setup • Do not connect power until all other connections are made.
PAGE 3
Note: To ensure that the product complies with EN55022B and FCC Class B requirements, follow these instructions to install the ferrite bead on your LAN cable. Note: Attach ferrite bead to the terminal-end of the cable.