User's Manual

Wyndscent LLC

Remote control

Model:HK-19-01

FCC ID:2ASWE-HK-19-01

user manual

The remote controller uses a surface acoustic filter to transmit signals at

433MHz. When the A button or B button or C button is pressed, the

transmitting indicator flashes to indicate that the carrier signal of the

433MHz frequency is being transmitted. The A key, the B key, and the C

key generate different key values.

When the button A button or the B button or the C button is pressed for

more than 8 seconds, the transmission signal is automatically stopped,

and the transmission indicator also stops blinking, aiming to prevent the

card key.

Product parameters

1, using CR2032*2 battery power supply DC3V

2, modulation method: ASK

3, working current: 10mA

4, working frequency: 433MHz

Launch indicator

PAGE 1
Wyndscent LLC Remote control Model:HK-19-01 FCC ID:2ASWE-HK-19-01 user manual Launch indicator The remote controller uses a surface acoustic filter to transmit signals at 433MHz. When the A button or B button or C button is pressed, the transmitting indicator flashes to indicate that the carrier signal of the 433MHz frequency is being transmitted. The A key, the B key, and the C key generate different key values.
PAGE 2
FCC Statement This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions: 1) this device may not cause harmful interference, and 2) this device must accept any interference received, including interference that may cause undesired operation. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.