Wisen Innovation Technical Doc. No.2019 WISENMESHNET® L-Series Omni Tilt Sensor Node - User Manual WISENMESHNET® L-Series Smart Gateway (C-Type) User Manual Model Name: 6005 Wuxi Wisen Innovation Co., Ltd. November 2019 www.wisencn.
Wisen Innovation Technical Doc. No.2019 WISENMESHNET® L-Series Omni Tilt Sensor Node - User Manual Revision History and Clarification Rev. Issue Date Revisions V1.0 01/11/2019 1 Issue st Written By Revised By Xiaoyan Huang Dr. Yan Wu Document Definition: It defines the specifications (i.e.
Wisen Innovation Technical Doc. No.2019 WISENMESHNET® L-Series Omni Tilt Sensor Node - User Manual Table of Contents 1. Product Introduction................................................................................................................................................... - 4 2. System Structure Layout ............................................................................................................................................. - 5 3. Gateway & Radio Features .................
Wisen Innovation Technical Doc. No.2019 WISENMESHNET® L-Series Omni Tilt Sensor Node - User Manual 1. Product Introduction ® The WISENMESHNET Gateway is one of the key products in our patented WISENMESHNET ® ® geotechnical safety monitoring system. Working together with the WISENMESHNET Node products, it intelligently collects, converts and delivers the real-time information on the deformation of a structure to a remote server via its ® embedded 2G/3G/4G module.
Wisen Innovation Technical Doc. No.2019 WISENMESHNET® L-Series Omni Tilt Sensor Node - User Manual 2. System Structure Layout Figure 2. System Structure Layout. www.wisencn.
Wisen Innovation Technical Doc. No.2019 WISENMESHNET® L-Series Omni Tilt Sensor Node - User Manual 3. Gateway & Radio Features Node Features: Basics Primary Battery Power Qty. x 4 (3.6V Lithium primary D-Cell ER34615) (Internal) Battery Connection Standard Aluminium Battery Holder Secondary DC Power (External) 7V - 32VDC (Max. Current >= 2Amp, e.g. 110-240VAC to 12VDC adaptor) Tertiary Power (External) 3.6VDC Battery Unit or Solar Unit Mobile Network Stop Voltage >= 2.
Wisen Innovation Technical Doc. No.2019 WISENMESHNET® L-Series Omni Tilt Sensor Node - User Manual Radio Features: FCC 915MHz System Radio Band 902-928MHz Central Frequency (Default) 905/910/915/920/925MHz Default Transmit Power 15dBm Receive Sensitivity -112dBm Bandwidth 500kHz Transmission Speed 19.2kb/s No. of Mesh Hop* 6 Hops Supported Sampling Interval Antenna Description 1-60mins Mesh Antenna Omni-directional (20cm in length) or Customised 2/3/4G-Antenna Omni-directional 3.
Wisen Innovation Technical Doc. No.2019 WISENMESHNET® L-Series Omni Tilt Sensor Node - User Manual 4. Gateway Terminologies Figure 3. Gateway Internal Configuration Terminologies. 5. Operation Procedures 5.1.Gateway Location Choices Location: There are two fundamental considerations that are used by Wisen to identify available location for a Gateway: 1) Firstly, the mesh coverage is the primary factor to be considered.
Wisen Innovation Technical Doc. No.2019 WISENMESHNET® L-Series Omni Tilt Sensor Node - User Manual a remote server. The simplest way to check the signal availability on site will be to use a mobile phone having the same service operator as that of the Gateway; Once the location is chosen, you are ready to deploy your WISENMESHNET® system. 5.
Wisen Innovation Technical Doc. No.2019 WISENMESHNET® L-Series Omni Tilt Sensor Node - User Manual the figure below to make the DC power connections to “DC_IN” and “GND” terminal plugs. Warning: incorrect power connection will cause serious damage. Figure 6. DC Cable & RS232 Connections. LED flashing sequence: You should see three Mesh LEDs flashing 3 times, then green LED on for 1s, then a quick flash on the 3 LEDs, then Off.
Wisen Innovation Technical Doc. No.2019 2) WISENMESHNET® L-Series Omni Tilt Sensor Node - User Manual The Gateway relies on radio signals to communicate with the nodes. It must be deployed before the nodes and please ensure that it is not covered by any materials, which would block the radio signals, for example, chicken wire, aluminum sheet hoardings, etc.; 3) If no data is received from the Gateway, then please carry out investigations in the following two stages: A.
Wisen Innovation Technical Doc. No.2019 WISENMESHNET® L-Series Omni Tilt Sensor Node - User Manual 3 4G Antenna 200 1 4 Cap-Hex-Head Screw M6x14 4 5 User Manual* Downloadable from WISENMESHNET® 6 Inspection Report* Visualisation Platform. 8. Safety and Warning Warning: Please read the following instructions carefully.
Wisen Innovation Technical Doc. No.2019 WISENMESHNET® L-Series Omni Tilt Sensor Node - User Manual When disposing of the batteries, please contact your local authorities or dealer and ask for the correct method of disposal. 9. Contact - Wuxi Wisen Innovation Co., Ltd.: www.wisencn.com - Email: marketing@wisencn.com 10.FCC Warning - This device complies with part 15 of the FCC Rules.