无锡威达智能电子股份有限公司 规格书 SPECIFICATION FOR APPROVAL 供应商名称: SUPPLIER: 无锡威达智能电子股份有限公司 制造商名称: MANUFACTURER: 无锡威达智能电子股份有限公司 部品品牌: PART LOGO: 部品名称: PART NAME: 蓝牙语音遥控器 厂家型号: SPEC.
版本说明 V1.0 V2.0 V2.1 更改内容 Add format code declaration, manual statement Increase the type of key color, buttons, surface treatment, nameplate, raw material requirements, packaging requirements, data parameters, reliability requirements 更改人 吕惠宁 Lu Hui Ning 吕惠宁 Lu Hui Ning 更改时间 2014.6.15 2015.7.27 盛永霞、吕慧宁 Sheng Yongxia, Lu Huining 2016.3.
厂家名称 遥控器规格书 Manufacturer's name Remote 规格书编号 Control Specifications 产品名称: 蓝牙语音遥控器 product name: Bluetooth voice data2021.12.
Whether with a nameplate (screen printing/sticker) 客户名称/Customer : 公司编号/CO.P/N: EDE 编号/EDE P/N : 客户编号/CUSTOMER P/N : 日期/Date: 日期/Date:2022.3.
目录: content: 1. 规格书封面 1. Specification cover 2. 目录 2. Directory 3. 原材料要求 3. Raw material requirements 4. 检验内容及要求 4. Inspection content and requirements 5. 遥控器外观图及码值 5. Remote control appearance and code value 6. 遥控器关键原材料清单及物料图片 6. Remote control key raw materials list and material pictures 7. 遥控器原理图 7. Remote control schematic 8. 遥控器尺寸图 8. Remote control dimension diagram 9. 遥控器 PCB 半成品实物图(正反两面) 9. Remote control PCB semi-finished product real map (positive opposite sides) 10. 遥控器包装图 10.
3.1 发射管晶圆尺寸 Launch tube wafer size 发射管芯片尺寸。不小于12mil。 Launch tube chip size. Not less than 12 mil. 3.2 Pcb板材品牌 PCB sheet brand PCB品牌应为KB PCB brand should be KB 3.3 3.4 3.5 Pcb板厚度要求 PCB plate thickness requirements Pcb板铜箔厚度要 求 PCB plate copper foil thickness requirements 导电胶按键手感 系数 Conductive glue button 3.6 碳阻值 Carbon resistance 3.7 壳料原材料 Shell material PCB板厚度1.6mm±0.1mm(特殊结构板材要求需确认) PCB plate thickness 1.6mm ± 0.
horizontal vertical axis distance of the light point, the horizontal vertical axis distance of the spot is 0.5 m, the pressing remote control is transmitted to the infrared light signal. Line IR POWER ≥ 40uw / cm2, left and right levels 30 °, IR POWER ≥ 20UW / Cm2. 4.1.2 遥控距离 Remote control distance 4.1.3 动态电流 Dynamic current 4.1.4 4.1.5 4.1.6 4.1.7 4.1.8 4.1.9 4.1.
4.1.11 碳粒/碳油阻值测 试 Carbon / carbon resistance test 4.1.12 遥控器学习功能 可靠性 Remote control learning function reliability 4.1.13 学习距离 Learning distance 学习角度 Learning angle 4.1.14 用0.5*0.5mm线宽栅型测试板测试,500g正压力,要求碳粒阻值小于 100ohm,碳油阻值小于200ohm。 Tested with 0.5 * 0.5mm wire width, 500g positive pressure, requiring a carbon grain resistance to less than 100 ohm, and the carbon resistance is less than 200 ohm. 1、能学习各种编码格式的遥控器; 2、电压从0V调至2.2V-4.2V范围内能正常学习、发码; 3、在各种气候条件下能正常学习、发码; 4、 在长期操作下,已学习的内容不易丢失; (只适用于带学习功能遥控器) 1.
paint and silk print products) 4.2.3 铅笔硬度测试(针 对普通漆产品) Pencil hardness test (for ordinary paint products) 4.2.4 橡皮耐磨测试(针 对普通漆及丝印产 品) Rubber wear test (for ordinary paint and silk printing products) 4.2.5 3M 胶纸测试(针 对丝印) 3M adhesive test (for silk screen) 4.2.6 耐化妆品测试(丝 印) Cosmetic test (silk screen) 4.2.7 耐人工汗测试(丝 印) Practice sweat wrapped dust-free cloth) wet 95% alcohol pressure in the sample, wiped back and forth, and the test distance is about 20 mm.
test (silk screen) 4.2.8 百格测试 (表面喷漆) Baige test (Surface painting) 4.2.9 按键操作力 Button operation 为 40±2℃的恒温水浴箱中,试验时间 48 小 时; Test conditions: a), the test solution is: pure water 400ml, sodium chloride 8g, 1 ml of ammonium chloride, 1 mL of acetic acid, 6 ml of lactic acid, less sodium hydroxide, pH = 4.
4.2.14 电池接触弹力 Battery contact stretch 4.2.15 4.2.16 Tested the spring back elasticity when the negative spring is compressed to a minimum size battery. 回弹力不应小于 3N。 The rebound power should not be less than 3 N. 电池安装 依下图试安装最大及最小尺寸的遥控器 电池应能顺利安装 Battery installation Depending on the picture to 推力 install the maximum and minimum size remote control Battery should be installed smoothly 跌落测试 Fall test 4.2.
4.2.18 包装跌落测试: Packaging drop test: 将完好包装的整箱遥控器放置于跌落测 试台上,从 60cm 的高度跌落至台面 上。 需测试三面,一边,一角。 测试顺序:X,Y,Z,边,角 测试后的遥控器不可有功能失 效 Remote control after testing does not have functional failure Place the finished full box of remote controls on the drop test bench, falling from the height of 60 cm to the countertop. It is necessary to test three sides, one side, one corner. Test sequence: angle x, y, z, edge, 4.3 环境测试要求 Environmental test requirements 编号 Numbering 类目 Class 4.3.
4.3.2 低温贮存试验 Low temperature storage test 4.3.3 恒定湿热存储 Constant wet heat storage 4.3.
温度:+35°C ± 2°C 湿度:85% RH 密度:1.030 and 1.040 水平面收集的量:2 ± 1 ml/h /80cm² NaCl 浓度:5% Ph= 6.5~7.2 持续时间:24 小时 干燥时间:24 小时 4.3.5 盐雾测试 Salt spray test 4.3.6 包装运输试验:跌 落试验 Packaging and transportation test: drop test 4.3.7 包装要求 Packaging requirements 4.3.8 RoHS Temperature: + 35 ° C ± 2 ° C Humidity: 85% RH Density: 1.030 and 1.040 Water level collection: 2 ± 1 ml / h / 80cm2 NaCl concentration: 5% PH = 6.5 ~ 7.
5、遥控器外观图及码值 外观:
PCB: 键值 Key value:
编码格式 Encoding format:NEC 载波 Carrier:38KHz 客户码 Customer code:08F7 No.
1. 遥控器基本要求 Basic requirements for remote control 1).当连上蓝牙,遥控器发送蓝牙键值;未连接上蓝牙,则发送红外键值。 1). When Bluetooth is connected, the remote control sends the Bluetooth key value; when Bluetooth is not connected, the infrared key value is sent. 2).指示灯:红色,每按一次按键,指示灯闪一下。 2). Indicator light: red, each time you press the button, the indicator light flashes. 3). 低电压提醒:电量低于 2.4V 时,指示灯快速闪烁,只要还在操作,就一直保持闪耀状态,当不再对遥控器进行 操作后,闪烁 5 次或闪烁 3 秒后,停止并熄灭。 3). Low voltage reminder: When the battery is lower than 2.
12).在不使用语音的时候 Interval 为 20ms,使用语音的时候 interval 为 10ms;语音采样为 8K 12). Interval is 20ms when voice is not used, and 10ms when voice is used; voice sampling is 8K 2. 遥控器其他要求 1). 配对功能要求:不得存在扫描不到蓝牙设备或配对不上(包括短时间内连续按配对键)的问题,请验证 50 次确 保无问题; 1). Pairing function requirements: there must be no problems that the Bluetooth device cannot be scanned or paired (including continuous pressing of the pairing key within a short period of time), please verify 50 times to ensure that there is no problem; 2).
4).性能要求:要求支持≤10m,不得存在语音通话卡顿,丢失以及遥控器按键卡顿、丢码或连键等问题; 4). Performance requirements: It is required to support ≤10m, and there must be no voice call jams, loss, and remote control button jams, missing codes, or continuous keys; 5).功耗要求:遥控器可持续使用至少 6 个月以上 5). Power consumption requirements: the remote control can be used continuously for at least 6 months 6). 语音:16Khz voice sample with 16-bit sampling,短按语音键(彩色键)可以开始录音,遥控器收到语音引擎下 发的停止录音指令后停止录音。语音超时 30s 保护,强制退出录音。 6).
6、遥控器关键原材料清单及物料图片 Remote control key raw material list and material picture
7、遥控器原理图 Remote control schematic
8、遥控器尺寸图(包括结构 2D 图)Remote control dimension diagram (including structure 2D)
9、遥控器包装图 Remote control packaging
10 遥控器测试报告 Remote control test report 测试项目 Test items 测试方法 testing method 判定标准 judgement standard 1、 晶振频偏 用一探测针测试晶体 与芯片间的走线(不要 与引脚接触,可以绿油 接触) Use a probe to test the trailing line between the crystal and the chip (do not contact the pin, you can contact green oil) 按操作要求,进入遥控 器测试模式,遥控器会 发射一单载波信号,用 一探针连接频谱仪后 接触天线头部,测试其 功率, (仅限于蓝牙) According to the operation requirements, enter the remote control test mode, the remote control will transmit a single carrier signal, connect the spectrometer after connecting
4、 麦克风性 能测试 4, microphone performance test 5、 电池工作 寿命\ 5, battery work life 用一标准发声源,播入 1KHZ 的信号,距离 MIC 20CM,在 MIC 拾音端的 声压为 80DB+/-3DB,接 住语音键,用工具获取 该语音流. With a standard sound source, a 1kHz signal is played, and the MIC is 20cm, the sound pressure of the MIC pickup is 80 dB +/3dB, and the speech key is received, and the voice stream is obtained with the tool.
6、 动态功耗 (1) 按 键 功 耗 (2) 语 音 功 耗 (3) 静 态 功耗 6, dynamic power consumption (1) Button power consumption (2) Voice power consumption (3) Static power consumption 7、静态电流 Quiescent Current (1)按键短按操作 10 次取平均值 (2)语间取 3 次平均 值,每次 2S 以上 (3)无任何操作时的功 耗,10S 以内的平均值 以上操作均是在连接 状态下 (1) Press the button short press to operate 10 times average (2) Take 3 averages in the language, each time 2S or more (3) No power consumption in any operation, the average of 10s The above operation is in connection 无连接状态下的电流 Current without c
无锡威达智能电子股份有限公司 RoHS2.0 及 REACH 符合性自我声明表 Wuxi Weida Intelligent Electronics Co., Ltd. RoHS2.
是否符合(EC) No 1907/2006 标 准要求 Compliance with (EC) No 1907/2006 standard requirements or not 整体部件 Integral part 高关注物质(SVHC) 是 禁止和限制物质“附件 17” Prohibited and Restricted Substances "Annex 17" 是 是否符合(EC) No 1907/2006 标准 要求 Compliance with (EC) No 1907/2006 standard requirements or not IC PCB 原材料部件 Raw material components 贴片阻容 贴片发光 管 发射管 电解电容 弹簧 高关注物质(SVHC) 是 禁止和限制物质“附件 17”Prohibited and Restricted Substances "Annex 17" 是 高关注物质(SVHC) 是 禁止和限制物质“附件 17”Prohibited and Restricted Substances "Annex 17
塑壳 高关注物质(SVHC) 是 禁止和限制物质“附件 17”Prohibited and Restricted Substances "Annex 17" 是 高关注物质(SVHC) 是 禁止和限制物质“附件 17”Prohibited and Restricted Substances "Annex 是 17" 注:1、根据(EC) No 1907/2006 标准要求进行管控 SVHC(高关注物质)及禁止和限制物质, 如果在标准值以内填写是,反之则填写否。 1. Control SVHC (high concern substances) and prohibited and restricted substances according to (EC) No 1907/2006 standards, fill in Yes if it’s in the standard, otherwise fill in No. 2、请在页面加盖公司印章。 2. Please stamp the company seal on the page.
FCC STATEMENT : This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. Warning: Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.