User's Manual

ManualsBrandsWUUK ManualsComputers & AccessoriesWUUK Base Station

WHAT'S INCLUDED

For

WUUK Base Station

Accessories

1. Brand Home Protection Stickers

2. User Manual

3. Tips for Alexa and Google Home Connection

WUUK

Base Station

Power

Adapter

Ethernet

Cable

Type C USB

Charging Cable

WUUK

Wireless Cam Pro

Mounting

Bracket

Mounting Screws

and Anchors

For

WUUK Wireless Cam Pro

*Camera quantity and accessories vary by bundle package.

*Base Station's power adapter varies by region.

WUUK Wireless Cam Pro

Power on: Long press the Power button, until you hear the

device announces "Hello, WUUK".

Power o: Short press the power button 5 times, until the

device makes 3 short beeping sounds.

Entering pairing mode: When the device is on, long press the

power button for 3 seconds, until the device makes a short

beeping sound and the indicator light is ﬂashing red.

After the cameras are added to the WUUK Base Station, you

can move to the next step "MOUNTING THE CAMERA".

Power Up

Use either the backplate of the mounting bracket to mark the

location, or use the provided locating sheet in order to drill holes.

If you are installing on ﬁbered materials such as wood, particle-

board, you can directly install the backplate on using the

screws provided.

Anchors are necessary for walls that are made out of hard

materials such as concrete, brick, or stucco. In these cases, drill

holes with a drill bit, then insert the anchors into the holes.

Firmly screw the backplate of the mounting bracket onto

the wall. Turning the mount bracket cover clockwise to lock

the ball knob stick to the backplate, and adjust the angle

according to your needs.

SAFETY STATEMENT

Summary of content (2 pages)

PAGE 1
WHAT'S INCLUDED For WUUK Base Station WUUK Wireless Cam Pro For WUUK Wireless Cam Pro Power on: Long press the Power button, until you hear the device announces "Hello, WUUK". Power off: Short press the power button 5 times, until the device makes 3 short beeping sounds.
PAGE 2
FCC WARNING This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.