Datasheet

Dimensions: [mm]
6,0 ±0,3
9,2 ±0,3
5,0 ±0,3
2,54 ±0,2
5,7 ref.
1,4 ref. 1,0 ±0,1
1
2 3
4
Scale - 3:1
with dot: bifilar winding style
without dot: sectional winding style
Marking 510 (Inductance Code)
Product Marking:
Recommended Land Pattern: [mm]
1
2
3
4
2,54
9,5
2,0
1,2
Scale - 3:1
Schematic:
2
1
3
4
1
2
Properties Test conditions Value Unit Tol.
Inductance L 1 kHz/ 100 mV 51 µH ±30%
Rated Current I
R
ΔT = 40 K 1000 mA max.
DC Resistance R
DC
@ 20 °C 0.16 Ω max.
Leakage Inductance L
S
1 MHz/ 1 mA 3150 nH typ.
Number of windings N 2
Inductance L 1 kHz/ 100 mV 51 µH ±30%
Maximum Impedance Z
max
5500 Ω typ.
Rated Current I
R
ΔT = 40 K 1000 mA max.
DC Resistance R
DC
@ 20 °C 0.16 Ω max.
Leakage Inductance L
S
1 MHz/ 1 mA 3150 nH typ.
Insulation Test Voltage V
T
500 V (AC) max.
Rated Voltage V
R
80 V
Electrical Properties:
RoHS Approval Compliant [ 2011/65/EU&2015/863 ]
REACh Approval Conform or declared [ (EC)1907/2006 ]
Halogen Free Conform [ JEDEC JS709B ]
Halogen Free Conform [ IEC 61249-2-21 ]
Certification:
It is recommended that the temperature of the component does not exceed +125 °C under worst
case conditions
Ambient Temperature (referring
to I
R
)
-40 up to +85 °C
Operating Temperature -40 up to +125 °C
Storage Conditions (in original
packaging)
< 40 °C ; < 75 % RH
Moisture Sensitivity Level (MSL) 1
General Properties:
Würth Elektronik eiSos GmbH & Co. KG
EMC & Inductive Solutions
Max-Eyth-Str. 1
74638 Waldenburg
Germany
Tel. [phone] - 0
www.we-online.com
[e-mail]
CHECKED REVISION DATE (YYYY-MM-DD) GENERAL TOLERANCE PROJECTION
METHOD
IMA 009.000 2019-05-20 DIN ISO 2768-1m
DESCRIPTION
WE-SL2 SMT Common Mode Line
Filter
ORDER CODE
744227S
BUSINESS UNIT STATUS PAGE
eiSos Valid 1/6
This electronic component has been designed and developed for usage in general electronic equipment only. This product is not authorized for use in equipment where a higher safety standard and reliability standard is especially required or where a failure of the product is reasonably expected to cause severe personal injury or death, unless the parties have executed an agreement specifically governing such use. Moreover Würth Elektronik eiSos GmbH
& Co KG products are neither designed nor intended for use in areas such as military, aerospace, aviation, nuclear control, submarine, transportation (automotive control, train control, ship control), transportation signal, disaster prevention, medical, public information network etc.. Würth Elektronik eiSos GmbH & Co KG must be informed about the intent of such usage before the design-in stage. In addition, sufficient reliability evaluation checks for safety
must be performed on every electronic component which is used in electrical circuits that require high safety and reliability functions or performance.