Data Sheet

DATEFILEREV BY EDV NO
Date
Checked
Drawn
Name
Scale
DESCRIPTION
Position
GENERAL TOLERANCE Basic material
Projection
Drawing.- No.
c
washable definition
14-01-31
DaF
d
Bounce 10ms max. 14-04-11
e
revised MatchCode
14-07-25
f
material change
AL
WS-TATV 12x12mm washable Tact Switch with square actuator,
THT version
4304x60737x6
4304x60739x6.dft
11-02-14
Jelisarow
2:1
System :Solid Edge V20
WE
eiCan
CAD
Würth Elektronik
eiCan
.x = +/- 0,2
.xx = +/- 0,15
A4
SIZE
11-04-12a WJ
Material of Frame
11-10-28
warning textb WJ
This electronic component is designed and developed with the intention
for use in general electronics equipments.
Before incorporating the components into any equipments in the field
such as aerospace, aviation, nuclear control, submarine, transportation,
(automotive control, train control, ship control), transportation signal,
disaster prevention, medical, public information network etc. where higher
safety and reliability are especially required or if there is possibility of
direct damage or injury to human body, Wurth Elektronik must be asked
for a written approval.
In addition, even electronic component in general electronic equipments,
when used in electrical circuits that require high safety, reliability functions
or performance, the sufficient reliability evaluation-check for the safety
must be performed before by the user before usage.
DaF
11-02-14
Hsu
14-08-19
AL
0,6
1,0
3,0 ±0,1q
3,8 ±0,1q
1,0
3,5
4,3
3,5
0,5 max.
0,7
2,1
0
,
3
12,5
+1,0
-0,5
14,0
+1,0
-0,5
1,8
3,0
1,2 ±0,1
5,0 ±0,1
12,0q
R 1,0
1
2
4
3
8,5q
TECHNICAL CHARACTERISTICS
SPECIFICATION
>Rating: 50mA, 12VDC
>Contact Resistance:
Initial: 100mOHM max.
After Life Test: 2OHM max.
>Insulation Resistance: min. 100MOHM at 500VDC
>Dielectric Strength: 250VAC for 1 minute
>Stroke: 0.3 ± 0.1 mm
>Bounce: 10ms max.
MATERIAL
>Cover: Stainless Steel
>Stem: LCP UL 94V-0
>Frame: PA9T UL 94V-0, color Black
>Contact: Stainless Steel with silver
>Terminal: copper alloy with silver plating
>Tape: Polyimide tape
SOLDERING INFORMATION
>Terminal in THT version
>Wave soldering 260°C 10 sec. max.
>Hand soldering under 350°C for 3 sec. max
WASHABLE DEFINITION
Please do not submerse washable products into water or cleaning agents
or put them in locations exposed to water or liquids completely.
When cleaning by hand (brushing), please do not use excessive force on
our switch to avoid malfunction afterwards, because you could deform
function relevant areas or you could damage sealing functions.
Do not clean washable series immediately after soldering. The cleaning
agent may be absorbed into the switch through respiration while the
switch cools.
ENVIRONMENTAL
>Storage condition: -40°C ~ +85°C
>Operation condition: -40°C ~ +85°C
>Compliance: Lead Free, ROHS, Reach
PACKAGING INFORMATION
>Bulk
P.C.B. MOUNTING PLAN
SCHEMATIC
1 2
4
3
12,5 ±0,1
5,0 ±0,1
O 1,2
+0,1 - 0
PN Force Color of Stem Life cycle
430 476 073 716 160g ± 50gf Black 500.000
430 466 073 726 260g ± 70gf White 300.000
430 456 073 736 360g ± 90gf Salmon 200.000
Scale - 2:1