Thank you for your purchase! The intercom system is the latest product of our company.
1. What's included in The Box? 11 Intercom Overview 2. Getting Started 2.1 Connect AC Power 2.2 Set Channel & Code 2.3 Make an Address List" 2.4 Test Connecting 2.5 Distribute Different Stations to Different Users 2.6 Notes 3. Advanced Settings 3.1 Volume Setting 3.2 Power ON/OFF 3.3 Channel & Code Setting 3.4 Functions Description 3417ALK 3.4.2 GROUP 3.4.3 MONITOR 3.44 VOX 34.5 CALL 3.5 Usage Scenario 4. Additional Notes 5. Troubleshooting 6. Adding Additional Units 6.1 Expand to more intercom stations 7.
1. What's included in the Box 1.1 Intercom Overview Every intercom station has the following accessories. If you purchase additional stations, each new intercom station will come with its own set of the accessories listed below. Power Port {DC 3V 14) Channel Number Speaker VOL/VOL+ Walt Code Number Channel Code Setting doy Power Switch EM Wires internist a Function Key MIC Indicator Light AC Adapter Cable 2.Getting Started The basic steps for setting up your intercom are as follows: 2.1 Connect AC Power 2.
connection AC Power Every intercom is equipped with an adapter (DC 5V1A) and a cable. Please connect every intercom station to your local AC power. We kindly suggest that you use the origins! adapter and cable that was included in your packaging to turn on your device(s). Please feel free to contact us if you have encountered any problems with the adapter or cable. We will send you a free replacement as covered by the warranty and will give you a discount on future purchases if your warranty expires.
This intercom is an updated version. it will restore the original Channelization number within 1 minute of intercom inactivity after you use”Lock Channel&Code number” function.
2.4 Test Conn acting The steps for testing your connection are as follows: Step f:Separate Intercoms at least 5 meters apart to prevent interference Step 2: Set up each intercom to have the same code, but different channels. For this test, Intercom A will have channel 03, code 01 while Intercom B will have channel 05, code 01. If you are testing multiple units, continue to program them to the same code while assigning each intercom a different channel number (01-22).
2.6 Notes 1. You will need to press and hold the TALK button@ nen you want to speak to another user. Simply clicking the TALK button is an invalid entry; 2. You cannot press the TALK button on both sides of the system at the same time. One side may press and hold the TALK button @ro speak, then release the TALK button after they have finished their message. The other side can then answer your message by pressing and holding the TALK button and repeating the same steps.
3.Advanced Settings 3.1 Volume Setting This intercom has 8 levels of volume available. Press to set the volume. 8 levels of volume available 3.2 Power ON/OFF Press and hold the ON/OFF crouton about 3 seconds to open/close the intercom. You can close it when you don't want to get any voice interference. 3.3 Channel & Code setting This intercom is a real-time communication system. Please confirm that both stations are set to the same channel and code to be able to communicate.
This intercom is an updated version. it wil restore the original Channelization number within 1 minute of intercom inactivity after you use™Lack Channel&Code number function.
3.4.2 GROUP This function is used for calling all the intercom stations within a system at the same time. Press and hold the GROUP button (GT to speak to all the intercom stations in this system, even if they have different channels and codes. To confirm if an intercom station is part of your system, simply check the intercom’s frequency and code using our frequency table (check the table in the 2.2 in this instruction manual). Member B Member C 3.4.
3.4.4 VOX (Voice Operated Exchange) Press the VOX button gar gon the intercom station enter VOX mode. in this mode, the screen will present a VOX letter. in VOX mode, you do not need to press and hold the TALK bunion speak. Every time you want to speak, you will need to speak closely into the intercom station to activate it. When you are speaking closely into the intercom, the indicator light will tum red meaning it has successfully detected your voice.
3.4.5 CALL Set the channel and code to the same settings as the intercom you want to call, then press the CALL button Mh. Both your intercom and other user's intercom wil! ring. Other intercoms can hear the ring. they can press and hood the TALK button to speak to you and release the TALK button after they have finished speaking. You can then press and hood the TALK bunion reply. 3.5 Usage Scenario We set a usage scenario to help you understand it better and use it better.
Usage Scenario 1: The general manager informs the entire staff that they're having a meeting in the meeting room in 10 minutes. in this case, the manager can use the GROUP function on the intercom found in his office to notify all the intercoms at the same time. Press & Hold the GROUP button to talk to all the members at the same time.
Usage Scenario 4: There is a meeting in the HR departmental office, but the general manager is busy and doesn't have time to participate in the meeting. However, the meeting is still very important, and the general manager wants to fasten in on the meeting. In this case, the office of the HR department can set their intercom to MONITOR mode, and the general manager can set his or her intercom channel and code ta the same one as the intercom in the HR department.
ERE TET Notes: 1. The intercom system is a rear-time communication system which has no memory or storage function. Therefore, you cannot receive any information while you are talking to other users. 2. Please note that you will need to set the same channel and code if you want 2 intercom stations to receive communication. If also means that any other user can also communicate if they have same channel code. For example, your neighbors may be able to interfere with your intercom system.
The intercom units | 1. Try setting up the units in different locations. If the units work in a different do not work location but not in your home, the issue may be with the walls of your home or office, 1. Monitor can only support 1 monitor unit (receiving audio} per 1 monitored unit (sending audio). Or, multi-monitor {many units receiving audio} to 1 monitored unit {one unit sending audio).
Question 3: Can | talk to the other user without pressing the TALK key? Answer 3: No, you cannot. You must hold the TALK button the entire time you are speaking as usual. That is the working principle of the Intercoms. All similar machines operate in a similar manner. However, you can use VOX function to talk without hold the TALK button. To learn more about the VOX function, please read part 3.4.