Thank you for your purchase! The intercom system is the latest product of our company.
1. What's included in The Box? 11 Intercom Overview 2. Getting Started 2.1 Connect AC Power 2.2 Set Code & Channel 2.3 Make an Address List" 2.4 Test Connecting 2.5 Distribute Different Stations to Different Users 2.6 Notes 3. Advanced Settings 3.1 Volume Setting 3.2 Code & Chennai Setting 3.3 Functions Description TALKY 3.3.2 GROUP 3.3.3 MONITOR 3.34VOX 3.35CALL 3.4 Usage Scenario 4. Additional Notes 5. Troubleshooting 6. Adding Additional Units 6.1 Expand to more intercom stations 7.
1. What's included in the Box 1.1 Intercom Overview Every intercom station has the following accessories. If you purchase additional stations, each new intercom station will come with its own set of the accessories listed below. Digital Power Speaker Vol Channel Number (0-9) VOL+ Function Key Indicator Light MIC AC Adapter Cable 2.Getting Started The basic steps for setting up your intercom are as follows: 2.1 Connect AC Power 2.2 Set Code & Channel 2.3 Make an “Address List" 2.4 Test Connection 2.
connection AC Power Every intercom is equipped with an adapter (DC 5V1A) and a cable. Please connect every intercom station to your local AC power. We kindly suggest that you use the original adapter and cable that was included in your packaging to turn on your device(s). Please feel free to contact us if you have encountered any problems with the adapter or cable. We will send you a free replacement as covered by the warranty and will give you a discount on future purchases if your warranty expires.
2.3 Make an “Address List” If you have a large intercom system with many intercom units and each unit has a different channel number, you may need an “address list’ to help you remember which intercoms belong to which users. Record the channel number for each user, and give every user of your integrated intercom system this “address list” We recommend making this list for larger intercom systems, though it may not be necessary for networks with fewer intercoms.
2.6 Notes 1. You will need to press and hold the TALK button when you want to speak to another user. Simply clicking the TALK button is an invalid entry; 2. You cannot press the TALK button on both sides of the system at the same time. One side may press and hold the TALK bunion speak, then release the TALK button after they have finished their message. The other side can then answer your message by pressing and holding the TALK button and repeating the same steps.
3.Advanced Settings 3.1 Volume Setting This intercom has 8 levels of volume available. Press to set the volume. 8 levels of volume available 3.2 Code 8 Channel Setting The intercom Is a real-time communication system, and it requires that the two machines have the same channel and code. If you would like to communicate between 2 intercom stations, you same channel and code for each of them before communication can begin. This intercom has 3 code settings (A, B, and C) and 10 channels (0-5) available.
3.3.1 TALK To use the TALK feature, press and hold the TALK button), and the indicator will turn red light. Please speak while the red indicator light Is on as you press the TALK button . Once you are done talking, release the TALK button and the indicator will tum off Then your message will be sent and any other intercom station with the same channel! and code settings will receive your message. Press&Hold to speak, and release it after speaking.
3.3.3 MONITOR Put the intercom in the room you wish to have monitored (for example, a baby’s room), and then press the MONITOR button aD . This intercom unit will stay in transmit mode, where it will constantly send audio to any intercom unit with same channel and code. The monitor function has a 10-hour time limit. If you need to monitor for a longer period of time, you will need to reset it again every 10 hours.
Notes: 1.VOX mode and MONITOR mode are very similar, but also have a few key differences: An intercom unit in MONITOR mode An internment unit in YOX mode should be should be put in the monitored wom (ike stationed on your side to help you speak a3 baby < room) without pressing and holding the TALK button The monitor does not need voice VOX mode needs to detect someones within a activation chase speaking range to activate the intercom 3.3.
General Manager Room @ Channel 2 Code Department Channel 4 Code A Financial Department Channel 3 Code A | Sales Department Channel 5 Code A Usage Scenario 1: The general manager informs the entire staff that they're having a meeting in the meeting room in 10 minutes. In this case, the manager can use the GROUP function on the intercom found in his office to notify a! the Intercoms at the same time.
Usage Scenario 2: The general manager's office has something important to tel! the financial department and needs to ask the financial manager to come to his office right away. In this case, the general manager can use the CALL function to Cali the head of the financial department by pressing and holding the TALK gluttonous send the message. 1.Set the Channel to 3, then press CALL button; 2.The Financial will hear the ring, then she can Threshold the TALK button to speaking. "3.
4.Additional Notes Notes: 1. The intercom system is a real-time communication system which has no memory or storage friction. Therefore, you cannot receive: any information while you are talking to other users. 2. Please note that you will need to set the same channel and code if you want 2 intercom stations to receive communication. it also means that any other user can also communicate if they have same channel! code. For example, your neighbors may be able to interfere with your intercom stern.
The intercom units | 1. Try setting up the units in different locations. if the units work in a different do not work location but nat in your home, the issue may be with the walls of your home or office. 1. Monitor can only support 1 monitor unit (receiving audio) per 1 monitored unit {sending audio}. Or, multi-monitor {many units receiving audio} 10 1 monitored unit {one unit sending audio).
Question 3: Can | talk to the other user without pressing the TALK key? Answer 3: No, you cannot. You rust hold the TALK button the entire time you are speaking as usual. That is the working principle of the Intercoms. All similar machines operate in a similar manner. However, you can use VOX function to talk without hold the TALK button. To learn more about the VOX function, please read part 3.3.4 of this manual.