Thank you for choosing Wu loo! The intercom doorbell is one of our latest products.
1. What's included in the box? 1.1 Outdoor machine overview 1.2 Indoor machine overview 2. Getting Started 2.1 Checking the charge of the indoor and outdoor machine 2.2 Pairing and using 2.3 Install your doorbell 2.4 Usage scenario 2.5 Notes 3. Advanced Settings 3.1 Volume setting 3.2 Chime setting 3.3 Channel setting 3.4 Calling & Talking 3.4.1 Outdoor machine — Calling & Taking 3.4.2 Indoor machine -ON/OFF & Talking 3.4.3 Additional information 3.5 Charging 3.5.1 Outdoor machine charging 3.5.
LBL included in the box IF | Anchors X2 Charger & Cable| Outdoor Machine Waterproof Cap Indoor Machine Charge stand 1.1 Outdoor machine overview The outdoor machine should be installed on the wall closest to your door with the provided screws. The outdoor machine will remain in sleeping mode and will be activated when visitors click the CALL button 0. To save power, the outdoor machine will rectum to sleeping mode if it does not detect action within 25 seconds.
Volume ° Outdoor Machine -Adjust the volume of the voice from the indoor machine; Indoor Machine -Adjust the ring volume and the volume of the incoming voice from the outdoor machine.
The basic steps for installing and setting up your intercom doorbell are as follows: 2.1 Checking the charge of the indoor and outdoor machine 2.2 Pairing and using 2.3 Installing your doorbell 2.1 Checking the charge of the indoor and outdoor machine Check the battery level of outdoor machine: Click CALL Button 30 activate the machine. Then click the Volume Button). If you get the BEEP tone, it means the device has power.
2.2 Pairing and using After checking the battery level of the machine, and ensuring both the outdoor and indoor machine have power, push the Channel button 8 to set the channels for the devices. The machines should be on the same channel (either Use the Volume button oO and the SET button @v set your desired volume and chime. After you've configured your sound settings, click the CALL button Qo the outdoor machine to test and see if the bell rings on the indoor machine.
2.3 Installing your doorbell Install the outdoor machine on the wall closest to your door, and place the indoor machine on the charging stand. Be sure to plug the machine by connecting the AC power to your nearest socket. You are now ready to use your intercom doorbell. F ! Outdoor Machine Indoor Machine 2.4 Usage scenario 1. Set the same channel for both the indoor and outdoor machines; 2. Long press the ON/OFF button @ the indoor machine to tum it on; 3.
2.5 Notes 1. You must press and hold the TALK button when you want to speak to someone. Simply clicking the TALK button is invalid; 2. Two users cannot use the TALK button on both sides at the same time. Only one user can use the TALK button to speak to the other. The other user must wait for the speaker to finish, then press and hold the TALK button on their side to respond. You will not be able to hear the other user while you are speaking. Press & Hold to talk: Click is invalid.
Advanced Se 3.1 Volume Setting Adjust the volume of the incoming voice with any one of the 3 volume levels available. Simply click the Volume button OC to adjust the volume. When you click the Volume button Oo the outdoor machine, you adjust the volume of the voice from the indoor machine. When you click the volume button of the indoor machine, you aso adjust the ring volume and the volume of the Outdoor Machine incoming voice from the outdoor machine.
3.4 Calling & Talking This intercom doorbell have the function of talking between indoor and outdoor. 3.4.1 Outdoor machine — Calling & Talking Click the CALL button Oo to activate the outdoor machine, and call the indoor machine at the same time. The indoor machine will then ring. Wait for the ringing to stop, or click the ON/OFF button to stop the ringing manually. Press and held the TALK button ® found on the indoor machine to talk to the outdoor machine.
3.4.3 Additional information 1. Please note: two users cannot speak at the same time. Please wait until the other user is finished speaking before you begin your response. Two users also cannot talk when the machines are still ringing. Please wait for the ringing to end, or click the ON/OFF button ® to stop the ringing manually. You can then press and hold the TALK button @ the indoor machine to talk to the outdoor machine. 2. You must press and hold the TALK button 9 to communicate.
3.5.2 Indoor machine charging Low power--the ON/OFF button @ vil flash red; Charging--the LED indicator @® keep a red light; Fully charged--the LED indicator @® will keep a green light; Simply place the indoor machine on the charging stand to charge it. Connect the charging stand to AC power. Note: The Indoor machine is turn off when you received it, so please press&hold ON/OFF button for 3 seconds to turn on it at first. Suggest that place the indoor machine on the charging stand to charge it after used.
Both machines have power, but cannot communicate with each other Don't set the same channel for all machine Please check both machines and set them all to the same channel 2 machines press TALK button at the same time Please Walt until the other user is finished speaking before you begin your response The indoor machine does not turn on Please confirm the indoor machine is turned on.
New additional New additional New additional Outdoor Outdoor Outdoor Machine B Machine B Machine Step 1: Check and confirm Step 2: Press SET button at first, then Step 3: New additional outdoor it's in sleeping mode; press CALL button, and simultaneity B will flashing after step 2; lousy press them for 3 seconds; then Click the CALL button of original outdoor machine A; New additional Outdoor Machine B Outdoor Machine A Machine A Step 4: Click, Stop flashing, Have a tone, successful pairing;
6.2 Add more indoor machine If you want to install more indoor machines in different rooms or on different floors, you can install several indoor machines. New additional ~ Indoor Machine B Outdoor Indoor Outdoor Machine A Machine A Machine A Indoor Machine A How to expand to several indoor machines: Step 1: Check and confirm the new additional Indoor machine B is in OFF mode; Step 2: On the new additional unit, simultaneously press the SET button and the ON/OFF button for 3 seconds.
New additional New additional New additional Indoor Machine B Indoor Machine B Indoor Machine B at Step 1: Check and confirm Step 2: Simultaneously press SET Step 3: New additional indoor new additional indoor button and ON/OFF bitten for 3 machine B will flashing after step 2; machine in OFF mode; seconds; then Click the CALL button of original outdoor machine A; Step 4: Click, Stop flashing, Have a tone, successful pairing;
7.Questions & Answers Here we have sorted out some of the common problems encountered by our customers. We have provided detailed answers for your reference that can hopefully help you find all the solutions to your issues.
8. Connect Wu loo intercom doorbell can connect with Wu loo Intercom system. Below is the corresponding channel&code for connection: Note: h Wu loo Intercom System 1. When you set the corresponding Channel&code, doorbell can talk with our brand intercom. 2. Click the CALL button of outdoor machine, the intercom will not have ring even set the corresponding channel&code. However, Click the ON/OFF button for indoor machine, the intercom will have ring.