Installation & Operation Manual How You Heat Your Water Matters™ 238-54090-00A Rev 5/21
Congratulations! You have purchased the Bradford White Connect™ Adapter, Bradford White’s first internet connected product. With Bradford White Connect™, you have remote control over your Bradford White appliance. Change settings, set weekly schedules, monitor error messages from anywhere and more! Download the Bradford White Connect™ App from the App Store or Google Play Store and take advantage of managing your water heater remotely using your mobile device.
Prior to installation of the Bradford White Connect™ Adapter, verify that the water heater is fully installed to local codes and standards. The Adapter must be within 5 feet of a 120V source. Bradford White strongly recommends installation of the Adapter is done by a plumbing professional. For your safety, please do not attempt to repair the Adapter or any of its parts without Bradford White’s authorization; doing so will affect the warranty of the Adapter and/or the appliance itself.
ADAPTER OVERVIEW Action Button CTA-2045 Port (DC) for utility grid connectivity Mounting Holes (All 4 Corners) Modbus Port 2 (Future Use) Modbus Port 1 (Future Use) Ethernet Port (RJ45) Action LED Power Port Power Indicator LED
LED Color Pattern Description Solid Plugged into power supply but not connected to the internet. Blinking Plugged into power supply, connected to the internet, and updating Adapter firmware. Blue Blinking Bluetooth activated. Pairing process begins. Magenta Blinking Debugging or logging service. Amber Solid Plugged into power supply AND connected to the internet. Blinking Amber (15 seconds) Plugged into power supply, connected to the internet, and controlled by utility.
ADAPTER INSTALLATION 1. Mount the Adapter onto a flat surface using the supplied screws or the adhesive strips. Place the Adapter away from the water heater for stronger signal strength. For spacing, the Adapter must be within 5 feet of a 120V outlet and must be within reach of the ethernet port on the front of the water heater. The supplied ethernet cable is 7 feet long, however an ethernet cable (CAT5e) up to 100 feet long will work as well.
2. Plug one end of an ethernet cable into the RJ45 port on the Adapter and another into the RJ45 port on the water heater. Supplied with the Bradford White Connect™ Adapter is a 7 foot CAT5e ethernet cable. Please use either this cable or a similar one, up to a length of 100 feet. Recommended: Plug the Modbus port on the side of the Adapter using the supplied plug (blue). This is to prevent dust from entering the port, which may be used in future updates. 3.
4. Open the Bradford White Connect™ App and log in using your email and password. To sign up, click “SIGN UP as Homeowner” in the bottom left corner of the screen and follow the on-screen instructions. Once logged in, begin the pairing process by clicking “Add Water Heater” and follow the on-screen instructions.
5. To Discover the Adapter first hold the action button on the Adapter for 3 seconds. This will begin the Bluetooth pairing mode, indicated by a flashing blue LED light on the Adapter. Your Adapter will now be discoverable by your mobile device. Select the Adapter from the Discover screen, the mobile device will prompt you for a 6-digit code. Plug in the last six digits of your Adapter’s serial number, which can be found on the front label of the Adapter.
7. If your Adapter is successfully able to connect to the wireless network, you will see this screen. If empty, type in the serial number of the water heater or click the box to scan the barcode on the side of the heater. If your installing contractor uses the Bradford White Connect™ App, this step may already be complete. Click the box on the bottom of the Congratulations page to complete installation.
FCC Compliance Statement (USA) FCC ID: 2AX6A-BWCADAPTER Compliance Statements: This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: 1. This device may not cause harmful interference. 2. This device must accept any interference received, including, an interference that may cause undesired operation.
INFORMATION TO THE USER For Class A and Class B digital devices, information to the user is required to include the following statements (Section 15.105): For a Class A digital device or peripheral, the instructions furnished to the user shall include the following or similar statement, placed in a prominent location in the text of the manual: NOTE: This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules.
Manuel d’installation et de fonctionnement How You Heat Your Water Matters™
Félicitations! Vous avez acheté l’adaptateur Bradford White ConnectMC, le premier produit de Bradford White avec connexion Internet. Bradford White ConnectMC vous donne le contrôle à distance de votre appareil Bradford White.
Avant l’installation de l’adaptateur Bradford White ConnectMC, veuillez vous assurer que le chauffe-eau est installé conformément aux normes et aux codes locaux. L’adaptateur doit se trouver à moins de 1,5 m (5 pi) d’une source d’alimentation de 120 V. Bradford White recommande fortement que l’installation de l’adaptateur soit effectuée par un professionnel en plomberie.
APERÇU DE L’ADAPTATEUR Bouton d’action Port CTA-2045 (CC) pour la connectivité au réseau électrique Trous de montage (aux 4 coins) Port Modbus 2 (utilisation future) Port Modbus 1 (utilisation future) Port Ethernet (RJ45) Témoin DEL d’action Témoin DEL d’alimentation Port d’alimentation
Couleur témoin DEL État Description Constant Branché à une source d’alimentation, mais non connecté à Internet. Clignotant Branché à une source d’alimentation, connecté à Internet et mise à jour du micrologiciel de l’adaptateur. Bleu Clignotant Bluetooth activé. Le processus d’appariement débute. Magenta Clignotant Débogage ou entretien de connexion. Ambre Constant Branché à une source d’alimentation ET connecté à Internet.
INSTALLATION DE L’ADAPTATEUR 1. Installez l’adaptateur sur une surface plane à l’aide des vis fournies ou à l’aide des bandes adhésives. Pour un meilleur signal, éloignez l’adaptateur du chauffe-eau. L’adaptateur doit se situer à moins de 1,5 m (5 pi) d’une prise de 120 V et être à portée du port Ethernet à l’avant du chauffe-eau. Le câble Ethernet fourni fait 2,13 m (7 pi) de long, mais un câble Ethernet (CAT5e) d’une longueur maximale de 30,48 m (100 pi) peut également fonctionner.
2. Branchez une extrémité du câble Ethernet dans le port RJ45 de l’adaptateur et l’autre dans le port RJ45 du chauffeeau. Un câble Ethernet CAT5e de 2,13 m (7 pi) est fourni avec l’adaptateur Bradford White ConnectMC. Veuillez utiliser ce cable ou un câble similaire, jusqu’à une longueur maxi de 30,48 m (100 pi).
4. Ouvrez l’application Bradford White ConnectMC et connectez-vous à l’aide de votre adresse électronique et de votre mot de passe. Pour vous inscrire, cliquez sur “SIGN UP as Homeowner” (S’inscrire en tant que propriétaire) dans le coin inférieur gauche de l’écran et suivez les instructions à l’écran. Une fois connecté, commencez le processus de jumelage en cliquant sur “Add Water Heater” (Ajouter un chauffe-eau) et suivez les instructions à l’écran.
5. Pour découvrir l’adaptateur, appuyez d’abord sur le bouton d’action de l’adaptateur pendant 3 secondes. Le mode d’appariement Bluetooth commencera et sera indiqué par un témoin DEL bleu clignotant sur l’adaptateur. Votre adaptateur sera alors détectable par votre appareil mobile. Sélectionnez l’adaptateur dans l’écran “Discover” (Découverte), l’appareil mobile vous demandera un code à 6 chiffres.
7. Si votre adaptateur est en mesure de se connecter avec succès au réseau sans fil, vous verrez cet écran. S’il n’y a rien, saisissez le numéro de série du chauffe-eau ou cliquez sur la case pour balayer le code à barres situé sur le côté du chauffe-eau. Si votre installateur utilise l’application Bradford White ConnectMC, il se peut que cette étape soit déjà terminée. Cliquez sur la “DONE” (Terminé) en bas de la page de félicitations pour terminer l’installation.
Industry Canada (IC) Compliance Statement IC ID: 26687-BWCADAPTER Compliance Statements: This device complies with Industry Canada licenseexempt RSS standard(s). Operation is subject to the following two conditions: 1) This device may not cause interference., 2) This device must accept any interference, including interference that may cause undesired operation of the device.
INFORMATION DESTINÉE À L’UTILISATEUR Pour les dispositifs numériques des classes A et B, les informations destinées à l’utilisateur doivent comprendre les énoncés suivants (article 15.
NOTES:
STENCIL FOR MOUNTING ADAPTER ON A WALL The stencil on the following page can be used for spacing of the holes. For best use, we suggest mounting the Adapter horizontally and using all four screws. GABARIT POUR MONTER L’ADAPTATEUR SUR UN MUR Le gabarit à la page suivante peut servir à marquer les trous. Pour une utilisation optimale, nous vous suggérons de fixer l’adaptateur horizontalement et d’utiliser les quatre vis.
How You Heat Your Water Matters™ ©2021, Bradford White Corporation. All rights reserved.