UT-206 User Manual
Make the world safe&smart Content 2M-Ranger Quick UserGuide ..........................................................................................................................................................1 1 System Application structure .......................................................................................................................................................3 2 Bracelet ...................................................................................................
Make the world safe&smart 1 System Application structure Description：Social distancing system is to measure distance between tags. When two or more tags come in within 2metres, tags will have vibration alerts and data will be recorded. Event data will be transfer to the server for analyze when the tag is within the gateway range. Wrist tag：To be worn by staffs Gateway：Event data collection & transfer to serve 2 Bracelet 2.
Make the world safe&smart 2.2 LED Description LED1Power indication，Red LED blink when battery is 30%, need charging. Blue LED when charging， Green LED when fully charged. As shown below： Off Mode Test Mode Low Battery Charging Fully charged No Light Green Blink Red blink Blue Green 2.3 Strap a) How to tighten the strap Lift and pull the strap until desired size. As shown below： Version：V1.1 UT-206 www.woxuwireless.
Make the world safe&smart 2.4 Enter Test Mode & Warning Mode LED2 Green Blink Press and Hold BUTTON for 3sec,LED2Green light turns ON. Recommended working hours≤10hr. LED indication：LED2 Green Blink. 2.5 Non-range Mode（Manager Access） LED2 Green Blink Not bright Unable to power off when bracelet in working mode. Can set to non-range mode to stop vibration alert or extended standby time. Instructions：Press Red BUTTONonce, interval 1sec, then press and hold for 3sec, till LED2 Green Light Blink slowly.
Make the world safe&smart 2.7 Low-power Alert Red blink LED indication when battery power ≤30%：LED1 RED blink. When Low Batt Alert, it is recommend to go into the gateway range to transfer the data within 30 mins.。 Please take note: Data may be lost due to NO BATT. 2.8 Bracelet Charging a) Charging: Connect the charging cable’s magnetic interface to the bracelet interface. Version：V1.1 UT-206 www.woxuwireless.
Make the world safe&smart b) LED during Charging Bracelet full charge takes 2~3hrs. 2.9 Submit Records Event data will be transfer when bracelet and gateway is near. Gateway will transfer the data to server. Recommended distance between bracelet and gateway for data transfer ≤5m. 3 Bracelet Daily operation Bracelet Daily Operation： 4 Contact information for after-sales technical support 086-17337502198 zhangzhipeng@woxuwireless.com 0086-13851767329 tina@woxuwireless.com sales@woxuwireless.
Make the world safe&smart Manufacturer： Nanjing Woxu Wireless Co.,Ltd. 210042 4th floor No.2 Building, Xuzhuang Software Industry Base No.699-8 XuanWu Avenue, Nanjing China 5 Notation This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This device complies with part 15 of the FCC Rules.
