Specifications

Red light
Charging
Charging completed (standby)
Start Charging (starting)
Power off
Blue light
Purple light
OFF
OFF
OFF
OFF
ON
ON
OFF
ON
Power on
OFF
OFF
OFF
OFF
OFF
ON
OFF
OFF
Overheat
Fan error
OFF
OFF
OFF
Slow flash
QuickFlash
Overview The remote control Basic parameters Instrcution
Indicator Light
Power
Focus -
Foucus +
The cursor keys
Indicator Light
Power on
Power off
Display
technology
Size
Weight
DLP
Keystone
Correction
4 direction correction Product type Portable
LED
Wi-Fi, Bluetooth
The light
source type
Wireless
connection
Vertical ±45°
Horizontal ±45°
1:2:1
Correction
range
Throw ratio
140*104*97mm
0.745Kg
Setting
Arrow key
Return
Volume -
Volume +
Multifunction
Home
Power Mode
Battery Mode
Battery Model
OK
Mute
HDMI
USB2.0
Reset
Indicator light
Headphone jack
Air inlet
TF card
DC-IN
Power
Belt
Lens
Lens cover
Remote control receiving
A. Short press the power button of the projector or the
power button of the remote control once. After the prompt
window of shutdown/restart/music mode/timing appears,
press the power button of the projector or OK key of the
remote control to shut down.
Long press the power button above the projector for
2 seconds to start, or press the power button of the
remote control to start the projector.
B.Long press the power button for 5 seconds to turn it off,
as well as press the power button of the remote control
twice to shut it down.
Note:
Without the agreement of brand manufac-
turer, user disassembles the product,
violently squeezes or impacts, uses in high
temperature, high pressure, flammable and
explosive environment, and uses the
non-compliant method to charge the
projector (for example, the projector
requires 5V charging, user uses 9V or other
high voltage charging) and other product
dameged issues such as battery leakage,
burning and other product quality and
safety issues which is caused by human
improper factors, the brand manufacturer
does not bear any responsibility!
Notice
Connecting to Wi-Fi
NOTES: Your projector automatically connects to the previously used Wi-Fi network when
they are in range. When Wi-Fi is connected, your projector can notify you by showing * ( )
in the status bar.
Adding a Wi-Fi network
You can add a Wi-Fi network if the network does not broadcast its name (SSID), or add a
Wi-Fi network when you are out of range. To connect to a secured network, you first need the
security details from the network administrator.
Sharing your device as a Wi-Fi Hotspot
You can share your device with other devices by turning your projector into a Wi-Fi hotspot.
Connecting to Bluetooth
Bluetooth is a short-range wireless communication technology. Phones or other devices
with Bluetooth capabilities can exchange Information wirelessly.
1.Enter Home Screen > Bluetooth.
2.Slide the Bluetooth switch to the on position.
NOTES:When Bluetooth is on, the icon will appear in the status bar.
Changing the Device name
1.Enter Home Screen > Bluetooth.
2.Slide the Bluetooth switch to the on
position to turn on Bluetooth.
3.Set name and password.
4.Enter Save.
Product upgrade
Indicator light description
The fault The solution
Shut down and reboot
Shut down and reboot
Shut down and reboot
The projector is not connected to the power adapter, it
can only be turned off and cannot be turned on.
Please do not block the front air outlet and rear air
inlet mesh, restart
Please contact the after-sales supporting e-mail
Unable to display projection
Android crash
Abnormal projection
Remote control cannot trun on
System prompt the peojrctor is
overheated, or automatic shut-down
Other system failures
Please ensure that the power of the projector is more than 50% or connected to the
power supply (Please keep charging during the upgrade process).
1. Upgrade online with Wi-Fi
2. If there is a new firmware update in the local upgrade, you can download the latest
Firmware from the official website, put it into the USB drive and insert it into the
USB port to upgrade.
1. When using the projector, please do not watch
the lens directly to avoid damage to the eyes.
2. Please do not use in hot and humid environment.
3. Please do not block the air outlet or air inlet.
4. Install away from the wall In order to maintain the
performance and feasibility of the projector, please
leave at least 30cm between the projector and the
wall.
Warning:
* Block the projector Vented slits and openings.
* Wipe the device with a scrub, paraffin or solvent.
* Used under the following conditions：
- Extremely hot, cold or humid environment.
- Ensure indoor temperature is between 5-40℃.
- Relative humidity is 80% maximum at 5-40℃, no
condensation.
- Areas susceptible to large amounts of dust and
dirt.
-Near any equipment that produce strong magnet-
ic field.
- Sunlight exposure directly.
- The product is suitable for non-tropical climate.
The color, appearance and specifications of this product are subject to the actual
product and may change without notice due to performance improvement.
SAFETYINSTRUCTION: The projector built-in battery,do not use in high
temperature and high humidity conditions. Product sit idle for a long
time, ensure that three month a charge!
Wi-Fi is a wireless networking technology that can provide wireless Internet access.
1.Enter Home Screen > Wi-Fi.
2.Slide the Wi-Fi switch to the on
position to turn on WI-FI.
3.The projector will scan for available
Wi-Fi networks.
4.Choose a network name to connect
to it.
5.If the network is secured, enter the
password and enter Connect.
conjunction with any other antenna or transmitter.
from all persons and must not be collocated or operating in
must be installed to provide a separation distance of at least 20 cm
with provided instructions and the antenna(s) used for this transmitter
This equipment must be installed and operated in accordance
with any other antenna or transmitter.
This product may not be collocated or operated in conjunction
forth for an uncontrolled environment.
This equipment complies with FCC radiation exposure limits set
RF EXPOSURE WARNING
Federal Communications Commission (FCC) Interference Statement
operate this equipment.
the party responsible for compliance could void the user's authority to
FCC Caution: Any changes or modifications not expressly approved by
cause undesired operation.
must accept any interference received, including interference that may
(1) This device may not cause harmful interference, and (2) this device
to the following two conditions:
This device complies with Part 15 of the FCC Rules. Operation is subject
4.Consult the dealer or an experienced radio/TV technician for help.
which the receiver is connected.
3.Connect the equipment into an outlet on a circuit different from that to
2.Increase the separation between the equipment and receiver.
1.Reorient or relocate the receiving antenna.
interference by one of the following measures:
equipment off and on, the user is encouraged to try to correct the
to radio or television reception, which can be determined by turning the
particular installation. If this equipment does cause harmful interference
However, there is no guarantee that interference will not occur in a
to radio communications.
used in accordance with the instructions, may cause harmful interference
uses and can radiate radio frequency energy and, if not installed and
harmful interference in a residential installation. This equipment generate,
These limits are designed to provide reasonable protection against
Class B digital device, pursuant to Part15 of the FCC Rules.
This equipment has been tested and found to comply with the limits for a