User's Manual

APP Bluetooth Controlling Marquee RGB Neon Lights
User Manual
Application Instructions
• Any indoor space, for both residential and commercial spaces. Can be used outdoors but only in
covered areas and in dry weather. The lights must be stored indoors.
Features of the Light
• The main body of the light is made of steel sheet and RGB neon silicon strip.
• Whole set of the light is FCC and SAA approved.
• The light can be hung on the wall using the key hole or placed on a flat surface to stand alone.
Usage of Light
• Do not attempt to adjust or change any part of the structure.
• The light should not be placed in a location where it be easily knocked over.
• neon light input voltage is 12V, so 12V adaptor is needed. Each adaptor (100W) can drive max 2pc
letters together. It means you could use 1 adaptor to operate 1 letter or 2 letter, can’t dive 3 letter or more
at same time.
Usage of Bluetooth LED Controller Operation Instruction
Each light has a Bluetooth controller inside as below image.