NAKAMICHI QUICK START GUID Model: SHOCKWAFE PRO 5.
IMPORTANT SAFETY INSTRUCTIONS Your Unit is designed and manufactured to operate within defined design limits, and misuse may result in electric shock or fire. To prevent your Unit from being damaged, the following rules should be observed for its installation, use, and maintenance. Please read the following safety instructions before operating your Unit. Keep these instructions in a safe place for future reference. • Read these instructions. • Keep these instructions. • Heed all warnings.
TABLE OF CONTENTS Package Contents ………………………………………………………………………………………………….. 4 Controls and Connections …………………………………………………………………………………………. 5 First Time Set Up …………………………………………………………………………………………………… 6 Using the Remote …………………………………………………………………………………………………... Connecting with HDMI ……………………………………………………………………………………………... Functions on your Remote ………………………………………………………………………………………… EQs on your Remote ………………………………………………………………………………………………. Programming the Remote ………………………………………………………………………………………….
PACKAGE CONTENTS Shockwafe Pro Sound Bar Wireless Subwoofer 2 x Satellite Speakers Remote Control with Batteries Digital Optical Cable Subwoofer Power Cable 2 x Satellite Speaker Audio Cables HDMI Cable 3.
CONTROLS & CONNECTIONS Back of Sound Bar USB* USB In OPTICAL (4) Digital Optical Audio In * For Firmware update only. AUX (7) Analog Audio In (Stereo 3.
Input Press to change the audio source. Demo Press to play NAKAMICHI demo track for tuning. Volume Increase or decrease the loudness of the audio. Power Press to turn Sound Bar on or off.
Back of Subwoofer Back of Satellite Speaker LED Indicator Power Port Pairing Button Satellite Speaker Ports (Connects to Satellite Speakers) Satellite Speaker Port (Connects to Subwoofer) Power Switch 7 7
FIRST-TIME SETUP 1 Back of Sound Bar 3.5MM AUDIO CABLE DIGITAL OPTICAL CABLE† BETTER GOOD DIGITAL COAXIAL CABLE† ‡ BETTER CHOOSE ONE CABLE GOOD * Not all TVs have the audio outputs shown above. To connect the Sound Bar directly to your other devices (Blu-Ray player, game system, etc.) see your device’s user manual. OR BETTER * OR BEST Cables appearance may differ from the ones supplied.
Do not use HDMI IN for First-Time Setup. See Advanced Setup if you would like to connect HDMI devices (such as Blu-ray™ players, cable boxes, and game consoles) to your Sound Bar. HDMI CABLE BEST Connect the Sound Bar to your TV* using one of the connection types to the left. Choose the best possible connection type. Be sure the TV port is an audio output, not an audio input. HDMI cables send Video (Out) and receive Audio from the TV. See the Connecting with HDMI section for more information.
2 Connect the power cable to the Sound Bar AC IN as shown. Plug the power cable into an electrical outlet.
3 Connect the satellite speakers to the subwoofer using the included satellite speaker audio cables. Match the color coded speaker cable to the matching speaker port color.
4 Connect a power cable to the subwoofer. 5 Plug the power cable into a power outlet. 6 Flip the power switch into the ON position.
7 For the best surround sound experience, position the Sound Bar, subwoofer, and satellite speakers as shown. The Sound Bar should be close to ear level. Sound Bar is centered below the TV. 13 Note: Speaker stands not included.
8 Top 9 Remove the battery cover by gently sliding it away from the remote. Top Insert the included batteries and gently slide the battery cover back into place. 10 Turn your TV on, the Sound Bar will automatically turn on and begin searching for an active input. You can press the SOURCE button to switch between audio sources. For example, I f you are connected your TV to HDMI IN (ARC), set the Sound Bar to HDMI ARC. Power Source Tip: Pressing the SOURCE button will stop the auto detect function.
USING THE REMOTE Display Displays Sound Bar Settings TV Power Press to power on/off TV. Power Press to power on/off Sound Bar. Menu Press to access menu settings. Previous Press to skip to the previous track in Bluetooth mode. (Changes audio settings in Menu) Up/Down Press to change channels on TV. Press to cycle through settings and options in menu.
CONNECTING WITH HDMI What is HDMI Audio Return Channel (ARC)? To connect using HDMI*: Using HDMI ARC, your TV can send audio to the sound bar using an HDMI cable. 1. Connect one end of the HDMI cable to the HDMI (ARC) port on the back of your TV. You will need to connect your sound bar to your TV’s HDMI ARC port using an HDMI cable that is ARC compatible. 2. Connect the other end to the HDMI OUT (ARC) port on your NAKAMICHI sound bar. 3.
Back of TV* Connect to HDMI (ARC) port on your TV * HDMI ARC port location may differ by TV manufacturer. See your TV’s user manual for more information.
FUNCTIONS ON YOUR REMOTE LEDs located here. Press the Menu button and use the Up/Down Arrow buttons on the remote to access the different functions and acoustic settings of the Sound Bar. Each function and setting will be displayed on the remote control’s LCD display. The LED Indicators on the Sound Bar will behave differently with each function. Function LED Behavior Center Volume FIVE Left LEDs indicate Center Volume at 5.
Function LED Behavior Description Bluetooth Pairing LEDs flash from left to right and back continuously when searching for devices. Press the Enter button on the remote. The sound bar will be discoverable for 15 minutes. Your can now search for the sound bar (SHOCKWAVE PRO 5.1) using your Bluetooth device. The sound bar will power down if no device is found. Note: Set your Bluetooth device into pairing mode prior to the sound bar.
EQs ON YOUR REMOTE Press either Movie, Sports, Music, TV,, Game or Night EQ buttons on your remote to toggle through more EQ settings under that genre. Each function and setting will be displayed on the remote control’s LCD display. The LED Indicators on the Sound Bar will behave differently with each function. EQ LED Behavior Description Movie Fifth LED will blink once to indicate change of Movie EQ.
PROGRAMMING THE REMOTE You can program your Remote to control your TV. Press the Menu button on the remote, then use the Up/Down buttons to navigate to LRN TV RMT. Use the Next/Previous buttons to toggle through LRN POWER, LRN CH +, and LRN CH -. Press the corresponding commands from your TV Remote when prompted. You can erase the commands learned on your remote by simply resetting it. Press the Menu button on the remote, then use the Up/Down buttons to navigate to LRN TV RMT.
USING BLUETOOTH MODE Your Sound Bar supports music streaming from smartphones, tablets, and computers with Bluetooth capability. Device compatibility will vary, see your device’s documentation for more information. Once you have paired your source device to the Sound Bar, as long as you stay within range of the Sound Bar, your device should remain paired. Maximizing Signal A Bluetooth signal has a range of up to 30 feet.
RE-LINKING THE SUBWOOFER WITH THE SOUND BAR The subwoofer has already been paired with the Sound Bar by NAKAMICHI. However, they may need to be relink if there is no sound coming from the subwoofer. Turn off your TV speakers when programming your sound bar. 1 2 Power on the Sound Bar. The sound Bar and Subwoofer will re-link automatically. Once the linking is completed, the LED on the back of the Subwoofer will light continuously. First confirm that the Sound Bar is switched off.
ADVANCED SETUP Back of Sound Bar AUX (7) Analog Audio In (Stereo 3.5mm) OPTICAL (4) Digital Optical Audio In DIGITAL (6) † Coaxial In Network Media Player † Cable not included.
ADVANCED SETUP - HDMI Connect to HDMI (ARC) port on your TV HDMI cables transmit both audio and video. To view video from these devices, turn the Sound Bar on, then set the Sound Bar input to HDMI-ARC. Set your TV input to the HDMI port to which the Sound Bar is connected. OR Blu-ray Player Cable/Satellite Box 25 * Cables appearance may differ from the ones supplied.
WALL-MOUNTING THE SOUND BAR 1 Back of Sound Bar Wall-Mount Screw Holes Insert the two wall-mount screws into the wall-mount screw holes, and then tighten them with a Phillips screwdriver. 2 Place the included wall mounting template against the wall under your TV. Mark the four bracket holes using a pencil.
3 Be sure your screws are attached to wood studs, drywall anchors (for drywall), or concrete anchors (for brick/concrete walls). Screws for attaching the brackets to the wall are not included. Choose the screw type and length appropriate to your home’s construction. If in doubt, consult a professional installer. Wall Mount Screw Screw Size: M4 x 10 If you are unfamiliar with power tools or the layout of electrical wiring in the walls of your home, consult a professional installer.
WALL-MOUNTING THE SATELLITE SPEAKERS To wall-mount the satellite speakers: 1. Attach the wall mount screw to the back of the satellite speaker. 2. Attach the wall mount to the back of the satellite speaker. 3. Align and mount the satellite speaker with the wall mount bracket. Be sure your screws are attached to wood studs or drywall anchors (for drywall) or concrete anchors (for brick/concrete walls). Wall mounting hardware is not included.
HELP & TROUBLESHOOTING There is no power. • Press the POWER button on the remote control or on the top of your Sound Bar. • Ensure the power cord is securely connected. • Plug a different device into the electrical outlet to verify that the outlet is working correctly. • • • • There is no sound. Increase the volume. Press Volume Up on the remote control or on the top of your Sound Bar. Press MUTE on the remote to ensure the Sound Bar is not muted.
ONE YEAR LIMITED WARRANTY (U.S. Only) Nakamichi Corporation USA (“Nakamichi”) warrants to the original retail purchasers (the “Original Purchasers”) only. The Original Purchasers refer to the purchasers who purchase this Product from Nakamichi’s authorized retailers (“Nakamichi Retailers”). This warranty will terminate automatically prior to its stated expiration if the Original Purchaser sells or transfers this Product to any other party.
SPECIFICATIONS Sound Bar: Two 2.5” Full-Range Drivers (Centre) Four 2.5” Full-Range Drivers (Left and Right) Two 1.0” High Frequency Tweeters ( Left and Right) Power Consumption: 80W Satellite: One 2.5” Full-Range Drivers (Each Satellite) Power Consumption: 15Wx2 Subwoofer: One 8” Subwoofer Driver Power Consumption: 60W Inputs: Three HDMI (ARC on output HDMI) One Optical (Toslink) One Digital Coaxial Audio One 3.
LEGAL & COMPLIANCE FCC Class B Radio Interference Statement NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
© 2015 NAKAMICHI (USA) LLC. ALL RIGHTS RESERVED.