User Manual

Symptom Cause Solution
Vehicle will not sync
with the R/C Handset
Batteries are low in Vehicle
or R/C handset
Change to high quality Alkaline or
Lithium batteries
Vehicle and/or
R/C Handset keeps
switching
of f
Batteries are low or faulty
Replace the batteries
Insert high quality branded Alkaline
or Lithium batteries.
1
RealFX is
a
registered tr ademark
of China
Industries
Ltd . t/a Wow!
Stuff .
Protected by patents
GB2482119,
GB2482120, GB2482121.
International
patents
pending.
n
n
1.5v AA
1.5v AAA
n
e
1.5v AAA
1.5v AA
1.5v AAA
1.5v AA
2
2
4
1
2
2
GB
INSTALLING THE BATTERIES
GAME PLAY - QUICK START
GAME PLAY - RACE MODE
AI DIGITAL™ R/C HANDSET PRACTICE MODE
CHAMPIONSHIP MODE
YELLA PERIL
RED HOT REBEL
2x AI DIGITAL™ R/C HANDSET
Requires 3 x AA batteries each (not
included)
Please ensure that the batteries are installed by an adult.
AI Digital R/C
Handset (each handset requires 3 x AA batteries not included.)
For best results use High Quality Branded Alkaline or Lithium batteries.
1. Locate the screw on the battery compartment at the bottom rear of the
handset. (FIG 1)
2.
Unscrew the battery cover using a cross head screwdriver. (FIG 1)
3. Remove the
battery cover. (FIG 1)
4.
Insert the batteries according to the polarity shown. (FIG 2)
Ensure you have installed batteries correctly in all devices.
Clear a flat area larger than 2M x 1M. Roll out the
RFX Mat ensuring the surface is flat.
Switch on handset
1
Ensure you have installed batteries correctly in all devices.
Clear a flat area larger than 2M x 1M. Roll out the
RFX Mat ensuring the surface is flat.
Switch on handset
1
2x RFX ROLL OUT™
STREET EXTREME™
AI DIGITAL™ VEHICLES
Requires 3 x AAA batteries each
(not included)
5. Screw the battery cover back into place. (FIG 3)
FIG 1
FIG 2
FIG 3
A “Welcome to RFX Racing
Switch on your vehic le”
Switch on vehicle.
(Switch located on the underside of vehicle)
“Vehicle & Handset paired.
Master .
Select vehicle mode.”
A
“Welcome to RFX Racing
Switch on your vehic le”
Switch on vehicle.
(Switch located on the underside of vehicle)
“Vehicle & Handset paired.
Master .
Select vehicle mode.”
1x RFX ROLL OUT™ - 2M
Simply roll out the mat to get started
Steering &
RFX ROLL OUT™ STREET EXTREME™
A
PRESS - if you desire to change the above options.
Rotate toggle to select function and pull trigger to
confirm selection.
A
3
PRESS -
A
“Championship.
Master.
PLAYER ONE!”
Speaker
LED Indicator Light
Check
Menu
Toggle
AI DIGITAL™ VEHICLE
AI Digital Vehicles (each venhicle requires 3 x AAA batteries not included.)
For best results use High Quality Branded Alkaline or Lithium batteries.
1. Locate the screw on the battery compartment on the underside
3
PRESS -
A
IMPORTANT
If you want to add a Pace Car or
RACE MODES - Novice - Expert - Custom
Rotate toggle to select race mode and pull trigger to confirm selection.
Please go
to page 5 for Custom Race Mode selection.
Cancel
Replay
Info
Power Button
Headphone
Port
of the vehicle. (FIG 1)
2.
Unscrew the battery cover using a cross head screwdriver. (FIG 1)
3. Remove the
battery cover. (FIG 1)
4.
Insert the batteries according to the polarity shown. (FIG 2)
5. Screw the
battery cover back into place. (FIG 3)
“Practice... Position vehic le
on the starting grid and
press the check button”
additional players please go to
page 6 before you press the
check button.
4
A
“Position vehicle on the
starting grid and
press the check button”
IMPORTANT
If you want to add a Pace Car or
additional players please go to
page 6 before you press the
check button.
Practice
Championship
FIG 2
FIG 3
Position the vehicle[s] onto the grid ensuring the vehicle[s] are facing in the direction of
the illustrated arrows.
Position the vehicle[s] onto the grid ensuring the vehicle[s] are facing in the direction of
the illustrated arrows.
Pace Car
e
FIG 1
4
PRESS -
A
5
PRESS -
A
R/C Mode
Special function buttons for
targeted hazards
“3, 2, 1... GO!”
“3, 2, 1... GO!”
www.facebook.com/rfxracing
1.
www.rfxracing.com
www.facebook.com/rfxracing
2.
www.rfxracing.com
www.facebook.com/rfxracing
3.
www.rfxracing.com
www.facebook.com/rfxracing
4.
www.rfxracing.com
GAME PLAY - CUSTOM RACE MODE
GAME PLAY - ADDING ADDITIONAL VEHICLES
TROUBLESHOOTING
Not suitable for children under 3 years old due to small parts which may represent a
choking hazard. Recommended for use by children over 6 years old. This product operates on 2.4GHz
CHAMPIONSHIP CUSTOM MODE
Toggle from 10 t0 100 laps then
pull trigger to confirm.
A
Join as a COMPETITOR or PACE CAR at
stages where these symbols are shown.
JOIN AS A COMPETITOR
frequency. Please retain this information for future reference. Adult supervision required.
Battery Information:
• Different types of batteries or new and used batteries are not to be mixed.
• Do not mix alkaline,
standard (carbon-zinc), or rechargeable (nickel-cadmium) batteries.
•
Batteries are to be inserted with the correct polarity.
•
Exhausted batteries are to be removed from the toy.
• The supply
terminals are not to be short-circuited.
“Custom.
Number of laps?”
Toggle On / Off then pull
trigger to confirm.
“Tyre wear?”
Toggle On / Off then pull
trigger to confirm.
“Random hazards”
Toggle On / Off then pull
trigger to confirm.
“Fuel usage?”
Toggle On / Off then pull
trigger to confirm.
“Targeted hazards?”
Switch on handset
A
“Welcome to RFX Racing
Switch on your vehic le”
Switch on vehicle.
(Switch located on the underside of vehicle)
A
3
PRESS -
A
“Championship...
Player ‘X’ joined the
race”
“Vehicle & Handset paired.
Player ’X’ (2, 3, 4 or
5).
Select vehicle mode.”
IMPORTANT
The race will start when
player one
presses the
Check
button
• Non-rechargeable batteries are not to be recharged.
•
Rechargeable batteries are only to be charged under adult supervision.
•
Rechargeable batteries are to be removed from the toy before being charged.
Always:
• Make sure battery compartments are secure.
• Use
batteries of the correct size and type.
• Fit
batteries correctly observing the plus and minus marks on the battery and compartment.
• Replace a whole set
of batteries at one time.
• Remove dead
batteries from equipment.
• Remove
batteries from appliance that will not be used again for a long time.
• Please
remember that batteries should be kept away from young children as they could be easily
swallowed.
• Seek medical advice
if you believe a cell has been swallowed.
• Please
ensure that batteries are installed by an adult prior to use.
Never:
• Dispose of batteries in a fire.
Consumers have a significant role to play in reducing the impact of waste electrical and electronic equipment
on the environment. You can help by re-using or recycling such equipment. The crossed out wheelie-bin symbol
indicates that the product & batteries must not be disposed of in dome stic waste as they contain
substances
which can be damaging to the environment and human health. If you cannot re-use or recycle the
product or batteries, please use designated collection points, or civic recycling facilities to dispose of them.
Conforms to the safety requirements of ASTM F963.
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
5
A
“Position vehicle on the
starting grid and
press the check button”
IMPORTANT
If you want to add a Pace Car or
additional players please go to
page 6 before you press the
check button.
JOIN AS PACE CAR
Switch on handset
A
“Welcome to RFX Racing
Switch on your vehic le”
“Vehicle & Handset paired.
For Support Videos, FAQs and details on spare parts go online to:
www.rfxracing.com
DECLARATION
OF
CONFORMITY
Manufacturer’s Name: China Industries Ltd. T/A Wow! Stuff
Manufacturer’s Address: Creative Industries Centre, Wolverhampton Science P ark,
Wolverhampton, WV10 9TG, UK
Type of Equipment: RFX ROLL
OUT - STARTER KIT
(1) This device may not cause harmful interference, and
(2) This device
must accept any interference received, including interference that may cause undesired
operation.
WARNING: Changes or modifications to this unit not expressly approved by the party responsible for
compliance could void the users authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against
harmful interference
in a residential installation.
This
equipment generates, uses and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio communications. However, there
Position the vehicle[s] onto the grid ensuring the vehicle[s] are facing in the direction of
the illustrated arrows.
6
PRESS -
A
“3, 2, 1... GO!”
Switch on vehicle.
(Switch located on the underside of vehicle)
A
3
PRESS -
A
“Championship...
Player ‘X’ joined the
race”
Player ’X’ (2, 3, 4 or 5).
Select vehicle mode.”
IMPORTANT
The race will start when
player one
presses the
Check
button
Model Number: FX - 1001
Ye a r of
Manufacture: 2013
Application of Council Directive( s ): 1999/5/EEC The Radio Equipment and
Telecommunications Terminal Equipment 2000 (and its amending directiv es )
Standard(s) to which Conformity is declared: EN60950- 1, EN62479, EN62115,
EN301 489-1/3, EN300
440- 1/ 2
I
hereby declare that the equipment named above has been tested and f ound to comply with
the relevant sections of the above referenced specifications. The unit complies with all
essential requirements of the Directiv es.
Place:
Wolverhampton, UK Date: 16th March 2013 Graeme T aylor , Director
0678
Made in China
is no
guarantee that interference will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by one or more of the following measures:
· Reorient or relocate the receiving antenna.
· Increase the separation between the equipment and receiver.
· Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
· Consult the dealer or an experienced radio/TV technician for help.
The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications
to this equipment. Such modifications could void the user’s authority to operate the equipment.
The
antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm
for all persons and must not be co-located or operated in conjunction with any other antenna or transmitter.
www.facebook.com/rfxracing
5.
www.rfxracing.com
www.facebook.com/rfxracing
6.
www.rfxracing.com www.facebook.com/rfxracing
7.
www.rfxracing.com
www.facebook.com/rfxracing
8. www.rfxracing.com