User's Manual

ManualsBrandsWow! Stuff ManualsElectronicsHybrid Remote Control Attacknid, Combat Creatures

INSTRUCTION GUIDE

CONSTRUCT • CUSTOMIZE • COMPETE

www.combatcreatures.com

www.facebook.com/combatcreatures

www.combatcreatures.com

www.facebook.com/combatcreatures

3 x

Narrow

Armor Plates

6 x

Exploda-Armor

12 x Powa

Darts

Additional tools required Cross Head screwdriver

1 x Stealth

Stryder

Battle Brain

1 x Battle

Brain

Target

1 x Attacknid Core

Requires 4 x AA batteries

(not included)

1 x Snypa

Dart Blaster

1 x Dart

Magzine

Snypa

Dart Blaster

Electronic

Weapons Elevator

Exploda-Armor x 6

Stealth Stryder

Battle Brain

(Electronic)

Armor Plates x 6

Battle Diorama

Includes 5 x push out Targets

1 x Electronic

Weapons

Elevator

3 x

Wide Armor

Plates

Custom

Decal Pack

FIG 24

FIG 25

FIG 23

CONTENTS

Training Mode - Man vs Machine

1. Turn to the ‘ON’ position. (FIG 23)

2. The Attacknid can be moved around with the Smartdevice.

3. You can fire weapons and complete Assault Courses.

Target Practice

1. Remove the inner diorama scene from the box with the

printed targets on. (FIG 24)

2. These simply push out and assemble.

3. You now have 5 stand alone Attacknid targets to Blast

at but can also use the holes left in the diorama as

additional targets.

4. 10 points large targets, 20 and 30 points medium

targets and 40 points for the small targets.

Let us know how you scored at

www.facebook.com.combatcreatures

www.combatcreatures.com

www.facebook.com/combatcreatures

3 Green Lights Status: HEALTHY No hits

2 Green Lights Status: DAMAGED Hit once

1 Green Light Status: CRITICAL Hit twice

0 Green Lights Status: SHUTDOWN Hit three times

GAME PLAY

CUSTOMIZE

To continue playing you need to turn your Attacknid OFF and then back to either Training or

Battle Mode.

Customize your Attacknid! Use the decals to personalise your Attacknid.

Make it your own and send it to us on our facebook page www.facebook.com/combatcreatures

www.facebook.com/combatcreatures

Symptom

Cause

Solution

Attacknid will not sync

with the Smartdevice

Batteries are low

Needs to be re-synced

Change to high quality Alkaline or

Lithium batteries

See syncing your Attacknid

and Smartdevice

(see section 8)

Dart is jammed

Dart Blaster is not

properly inserted

See loading Dart Blaster on how to

load and fire Darts

Remove and re-attach your

Dart Blaster ensuring it is locked

in correctly

Weapon will not fire

You have the wrong mode Switch from ON to Battle Mode

The Battle Brain is

not working

Batteries are low

Replace the batteries

Attacknid LED is flashing

Green & Red

Batteries are low or faulty Replace the batteries

Insert high quality branded Alkaline

or Lithium batteries.

Attacknid keeps

switching off

It is not properly inserted See this manual or website on

how to complete

Combat Armour will not

go on

Battle Brain is not

connected properly

See section 5 or website on

how to attach your Battle Brain

There are no lights on the

Battle Brain

For Support Videos, FAQs and details on spare parts go online to

www.combatcreatures.com

Manufacturer’s Name: China Industries Ltd. T/A Wow! Stuff

Manufacturer’s Address: Creative Industries Centre, Wolverhampton Science Park,

Wolverhampton, WV10 9TG, UK

Type of Equipment: App-Attacknid

Model Number: CC - 1007

Year of Manufacture: 2013

Made in China

TROUBLESHOOTING

www.combatcreatures.com

Battle Mode

1. Switch to Battle Mode.

2. Now the Battle Brain has been activated.

3. Initially, the 3 LEDs on the Attacknid Battle Brain will light

up green. If not see troubleshooting.

4. With each direct hit on the target one green LED goes off and it ‘shudders’ to signify a

life lost.

5. ON the third hit the Attacknid shuts down with all lights off and audible sound.

Build your own Assault Course

Why not Build your own Assault Course around the house.

This is an all terrain robot, so you can walk your Attacknid

up and down slopes and around tight corners.

See www.combatcreatures.com for ideas.

There are two gaming modes, Training mode for pure blasting fun and Battle mode!

CC-1007 STEALTH STRYDER

Not suitable for children under 3 years old due to small parts which may

represent a choking hazard. Recommended for use by children over 6 years old. This product operates

on 2.4GHz frequency. Do not aim at eyes or face. Do not use near crowds. Do not aim at people or

animals. Only use missiles designed for this product. Do not attempt to catch the missiles. Do not put

your face over the missile even if it is not being used. Do not launch any improvised object other than

the one supplied or recommended by the manufacturer. Please retain this information for future

reference. Adult supervision required.

Battery Information

• Different types of batteries or new and used batteries are not to be mixed.

• Do not mix alkaline, standard (carbon-zinc), or rechargeable (nickel-cadmium) batteries.

• Batteries are to be inserted with the correct polarity.

• Exhausted batteries are to be removed from the toy.

• The supply terminals are not to be short-circuited.

• Non-rechargeable batteries are not to be recharged.

• Rechargeable batteries are only to be charged under adult supervision.

• Rechargeable batteries are to be removed from the toy before being charged.

Always :

• Make sure battery compartments are secure.

• Use batteries of the correct size and type.

• Fit batteries correctly observing the plus and minus marks on the battery and compartment.

• Replace a whole set of batteries at one time.

• Remove dead batteries from equipment.

• Remove batteries from appliance that will not be used again for a long time.

• Please remember that batteries should be kept away from young children as they could be

easily swallowed.

• Seek medical advice if you believe a cell has been swallowed.

• Please ensure that batteries are installed by an adult prior to use.

Never

• Dispose of batteries in a fire.

Consumers have a significant role to play in reducing the impact of waste electrical and electronic

equipment on the environment. You can help by re-using or recycling such equipment. The crossed out

wheelie-bin symbol indicates that the product & batteries must not be disposed of in domestic waste

as they contain substances which can be damaging to the environment and human health. If you

cannot re-use or recycle the product or batteries, please use designated collection points, or civic

recycling facilities to dispose of them.

Conforms to the safety requirements of ASTM F963.

This device complies with Part 15 of the FCC Rules.

Operation is subject to the following two conditions:

(1) This device may not cause harmful interference, and

(2) This device must accept any interference received, including interference that may cause

undesired operation.

WARNING: Changes or modifications to this unit not expressly approved by the party responsible for

compliance could void the users authority to operate the equipment.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device,

pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection

against harmful interference in a residential installation.

This equipment generates, uses and can radiate radio frequency energy and, if not installed and used

in accordance with the instructions, may cause harmful interference to radio communications.

However, there is no guarantee that interference will not occur in a particular installation. If this

equipment does cause harmful interference to radio or television reception, which can be determined

by turning the equipment off and on, the user is encouraged to try to correct the interference by one

or more of the following measures:

· Reorient or relocate the receiving antenna.

· Increase the separation between the equipment and receiver.

· Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

· Consult the dealer or an experienced radio/TV technician for help.

The manufacturer is not responsible for any radio or TV interference caused by unauthorized

modifications to this equipment. Such modifications could void the user’s authority to operate the

equipment.

The antenna used for this transmitter must be installed to provide a separation distance of at least

20 cm for all persons and must not be co-located or operated in conjunction with any other antenna

or transmitter.

Decal Pack

www.facebook.com/combatcreatures

Summary of content (2 pages)

PAGE 1
gb ! Not suitable for children under 3 years old due to small parts which may represent a choking hazard. Recommended for use by children over 6 years old. This product operates on 2.4GHz frequency. Do not aim at eyes or face. Do not use near crowds. Do not aim at people or animals. Only use missiles designed for this product. Do not attempt to catch the missiles. Do not put your face over the missile even if it is not being used.
PAGE 2
BUILDING YOUR ATTACKNID 5. ATTACHING THE BATTLE BRAIN 1. INSTALLING THE BATTERIES Please ensure that the batteries are installed by an adult. The Attacknid (requires 4 x AA batteries (not included.) (Do not use Rechargeable Batteries) For best results use High Quality Branded Alkaline or Lithium batteries. 1. Tilt the Attacknid 90° for ease of removing the cover. (FIG 1) 2. Unscrew the battery cover using a cross head screwdriver. 3. Remove the battery cover by pulling from the right hand edge.