SAFETY AND OPERATING MANUAL ORIGINAL INSTRUCTIONS Lithium-Ion cordless hammer drill WX366 WX366.3 WX366.
1 2 3 4 8 9 5 7 6 A1 A2 1 2 1 3 2 A3 B1
A3 B1 3 2 1 B2 C1 2 3 1 C2 C3 D E1 1-18
D E1 E2 E3 F 1-18
VIBRATION INFORMATION 1. CHUCK 2. TORQUE ADJUSTMENT RING 3. TWO-SPEED GEAR CONTROL 4. FORWARD/REVERSE ROTATION CONTROL 5. SOFT GRIP HANDLE 6. BATTERY PACK * 7. BATTERY PACK RELEASE BUTTON 8. SIGHT LIGHT 9. ON/OFF SWITCH Vibration total values (triax vector sum) determined according to EN 60745: Drilling into metal TECHNICAL DATA Type WX366 WX366.3 WX366.
ACCESSORIES WX366 WX366.3 WX366.5 Charger 1 1 1 Battery pack 1 2 2 Double Ended Bit 1 1 1 We recommend that you purchase your accessories from the same store that sold you the tool. Use good quality accessories marked with a well-known brand name. Choose the type according to the work you intend to undertake. Refer to the accessory packaging for further details. Store personnel can assist you and offer advice.
d) e) f) g) 8 power tool before making any adjustments, changing accessories, or storing power tools. Such preventive safety measures reduce the risk of starting the power tool accidentally. Store idle power tools out of the reach of children and do not allow persons unfamiliar with the power tool or these instructions to operate the power tool. Power tools are dangerous in the hands of untrained users. Maintain power tools.
m) When disposing of battery packs, keep battery packs of different electrochemical systems separate from each other. n) Recharge only with the charger specified by WORX. Do not use any charger other than that specifically provided for use with the equipment. A charger that is suitable for one type of battery pack may create a risk of fire when used with another battery pack. o) Do not use any battery pack which is not designed for use with the equipment. p) Keep battery pack out of the reach of children.
OPERATING INSTRUCTIONS NOTE: Before using the tool, read the instruction book carefully. INTENDED USE The machine is intended for driving in and loosening screws as well as for drilling in wood, metal and plastic. ASSEMBLY AND OPERATION ACTION PROBLEM SOLUTION FIGURE BEFORE OPERATION Removing the battery pack See Fig. A1 Charging the battery See Fig. A2 Installing the battery pack See Fig.
There are no user serviceable parts in your power tool. Never use water or chemical cleaners to clean your power tool. Wipe clean with a dry cloth. Always store your power tool in a dry place. Keep the motor ventilation slots clean. Keep all working controls free of dust. Occasionally you may see sparks through the ventilation slots. This is normal and will not damage your power tool. ENVIRONMENTAL PROTECTION Waste electrical products must not be disposed of with household waste.
www.worx.com Copyright © 2015, Positec. All Rights Reserved.