Remote Kit/Remote PODZ/Remote Controller FCC ID:NW75005R Model:5005(Receiver) , 5015
Revision History Version 1.0 Date 2012-‐5-‐11 Author Kenny 1.1 2012-‐5-‐16 Kenny 1.
Table of Contents Product Requirements Document 1. Introduction ........................................................................................................................................................................ 4 2. Detail Product Characteristics .................................................................................................................................... 4 2.1. Product Characteristics .
1. Introduction Product Requirements Document Remote PODZ is an OEM product for WWL, branded ion. This document contains the product description and requirements for Remote PODZ including 1. Product characteristic 2. Functional Specification 3. Technical Specification 4. Operation flow 5. Accessories 6. Packaging 2. Detail Product Characteristics 2.1.
2.2.
2.3.
Product Requirements Document 2.4. Operation Flow 2.4.1. Icon Index Power button of the remote Shutter button of the remote Slide switch of the remote Pairing button of the PODZ 2.4.2. Pairing If the remote and PODZ(s) are shipped in the same package, they will be pre-‐paired during production status.
Status Summary Status In Pairing mode Hold for 5 to 10 seconds Pairing completed Drop Pairing completed Product Requirements Document Reaction PODZ LED will flash for 10 seconds Remote LED will light up Remarks The flash will stop if the PODZ status is changed The LED will turn off if a.
2.4.3. Pairing Flow Chart Product Requirements Document Plug the PODZ to the camera The camera is turned on? Yes NO Turn on the camera Press for more than 3 secs. The receiver will enter pairing mode for 10 seconds.
2.4.4. Control Condition Turn on the remote will not affect the camera status.
When the camera is video recording Camera Remote Action Reaction Product Requirements Document Remote LED indication PODZ LED indication Remarks No No Press once No Action Press and hold for 2 seconds or more Stop the recording and turn off the camera After press for 2 seconds, flash once Fla
3. Technical Specification Product Requirements Document 3.1. Specification 3.2.
4. Accessories Product Requirements Document 4.1. Wrist Strap Length: 20 -‐22cm 4.2. Arm Band Strap Length: 4.3.
5. Packaging Product Requirements Document 5.1.
IMPORTANT REGULATORY INFORMATION This device complies with Part 15 of the FCC Rules: Operation is subject to the following two conditions: 1. This device may not cause harmful interference and 2. This device must accept any interference that is received, including any interference that may cause undesired operation. WARNING: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.