MODEL WSP-DT380 (3inch POS Printer) Rev. 4.0 WOOSIM SYSTEMS Inc. #501, Daerung Technotown 3th, 448, Gasan-Dong, GeumChun-Ku, Seoul, Korea Tel : +82-2-2107-3700 Fax : +82-2-2107-3707 URL: http://www.woosim.com All specifications are subjected to change without notice. http://www.woosim.
WSP-DT380 Rev. 4.0 Copyright WSP-DT380 3inch POS printer operator’s manual. Copyright ⓒ2012 by Woosim Systems Inc. All rights reserved. The information contained in this manual is the property of Woosim Systems Inc. And may not be reproduced in whole or in part without the prior written permission of Woosim Systems Inc. Trademark a registered trademark of Woosim Systems Inc. All other trademark are the properties of their respective companies.
WSP-DT380 Rev. 4.0 Introduction The WSP-DT380 is the ideal solution for POS system, kitchen printer, Electronic scale, Measuring equipment, Lottery etc. The general features of WSP-DT380 printer are as follows: Very silent printing thru direct thermal printing method High speed(170mm/sec, MAX) USB, Bluetooth(Ver 2.
WSP-DT380 Rev. 4.0 Using the Printer ● Be careful not to drop or bump the printer on a hard surface. ● Do not install the printer in direct sunlight or such areas. Suitable environment for the use of the printer is as follows: ◆ Operating temperature :-10°C to 50°C ◆ Relative humidity : 30% to 85% ● Do not install the printer near devices that generate strong electromagnetic fields such as a copy machine. ● Do not open the platen cover during printing .
WSP-DT380 Rev. 4.0 FCC ID : QDDWSP-DT380 THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES. Operation is subject to the following two conditions; (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. CAUTION : Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
WSP-DT380 Rev. 4.0 CONTENTS 1. Outline. .........................................................................................................................................7 1.1. Model classifications. ...........................................................................................................7 1.2. Product Part Number System .............................................................................................7 1.3. Specifications. ...............................................
WSP-DT380 Rev. 4.0 1. Outline. 1.1. Model classifications. ( WSP–DT380 ) ( ) Model Interface A0 : UART Power None : DC 24V/2.7A 1.2. Product Par t Number System Model name / Interface Spec. S40 Wired Wireless SC30 A RS-232C 1 Bluetooth W25 B TTL 2 IrDA C USB 0 None D RS-485 E Parallel Z None . . . Example) 1. Porti-S40 2. Porti-SC30 Serial/Bluetooth Part No. ⇒ S40/A1 Bluetooth Only Part No. ⇒ SC30/Z1 http://www.woosim.
WSP-DT380 Rev. 4.0 1.3. Specifications. Item Specifications Printing method Thermal dot line printing Characters per line 64cpl (MAX) Character size Eng. : 9*24dots, 12*24dots Kor. : 16*24dots, [24*24dots] Simplified/Traditional Chinese, Arabic, Cyrillic, Russian, Optional Characters Turkish, Greek, Japanese, Persian, Latin9 and Others upon request. Resolution W 8dots/mm X H 8 dots/mm Paper feed pitch 0.
WSP-DT380 Rev. 4.0 Item Environment conditions Specifications -10°C ~ 50°C (operating) Temperature -20°C ~ 60°C (storage) Humidity 30% - 85% (operating) Activation pulse Life span (at 25℃ and rated energy) resistance Abrasion resistance Paper cutting resistance 100 million pulses or more 100km or more (excluding damage caused by dust and foreign materials) 700,000 cuts or more http://www.woosim.
WSP-DT380 Rev. 4.0 2. Setting up the printer. 2.1. Printer & Accessories Your printer box should include these items. If any items are damaged or missing, please contact your dealer for assistance. WSP-DT380 AC Adapter Thermal roll paper http://www.woosim.
WSP-DT380 Rev. 4.0 2.2. Printer Features ▶ Part Name http://www.woosim.
WSP-DT380 Rev. 4.0 ▶ Dimensions http://www.woosim.
WSP-DT380 Rev. 4.0 2.3. Replacing paper roll. Note : Be sure to use paper rolls that meet the specifications. Do not use paper rolls that have the paper glued to the core because the printer can not detect the paper end correctly. 1. Make sure that the printer is not receiving data; otherwise, data may be lost. 2. Open the paper cover as the “One-Touch” way by pressing the button in the arrow direction like the picture. 3. Insert a new paper roll as shown. 4.
WSP-DT380 Rev. 4.0 2.4. Power supply 2.4.1. Specified power supply. The following specification is requested for Power supply. Input : Rated Voltage : AC 100-240V, 50-60Hz Capable of Supplying : +24VDC at 2.7A Avoid using power supply which its power capacity of power current is extremely high. 2.5. Setting the DIP switches The DIP switches are located on the bottom of the printer. The DIP switches are used to set the printer to perform various functions.
WSP-DT380 Rev. 4.0 No 1 2 DIP SWITCH No.
WSP-DT380 Rev. 4.0 3. Interface WARNING A wrong connection of power supply connector could be damage the printer. In the printer power off state Please connect the power supply. http://www.woosim.
WSP-DT380 Rev. 4.0 3.1. USB USB Pin No. Signal Name Function 1 USB_VCC +5V 2 DM DATA ‘-’ 3 DP DATA ‘+’ 4 GND Ground < USB (B TYPE)> Drawer Kick-out Pin No. Signal Name Direction 1 Frame GND - 2 Drawer Kick-out driver signal 1 Output 3 Drawer open/close signal Input 4 +12V - 5 Drawer kick-out drive signal 2 Output 6 Signal GND - < MODULAR JACK - DK623PCB6P> http://www.woosim.
WSP-DT380 Rev. 4.0 3.2. Bluetooth Category Specification Bluetooth Spec. Bluetooth Ver2.1 +EDR / Class2 (10m) Frequency Range 2.4GHz ISM BAND Data Transmission Rate 57600bps Fixed. Data bit 8 Data bit Fixed. Parity bit No parity Fixed. Stop bit 1 Stop bit Fixed. http://www.woosim.
WSP-DT380 Rev. 4.0 3.3. Card Reading Please take notice that Magnetic Stripe Card should be swapped in direction of arrow. Card can be read in one direction. http://www.woosim.
WSP-DT380 Rev. 4.0 4. Using the printer. 4.1. Control panel. BUTTON - FEED : When the printer is on, paper can be feed manually by pressing and holding the FEED button for more than one second. PANEL LAMP -POWER (Green) : Printer is ON and ready to receive data. -ERROR (Red) : Indicates a fault condition or a printer error. (i.e : no paper, paper cover opened. etc.) -PAPER (Red) : Indicates the shift time of the paper. http://www.woosim.
WSP-DT380 Rev. 4.0 4.2. The self test. The self test procedure will check most of the printer functions. For self test, turn on the power while holding down the FEED Button. The Self-Test checks the following : 1) Make sure paper roll has been installed properly. 2) The Self-Test prints the current printer status, which provides the control ROM version and the communication method setting. 3) After printing the current printer status, Self-Test will print a pattern using the built-in character set.
WSP-DT380 Rev. 4.0 5. Consumable Par ts 5.1. Recommended paper Type : Thermal Paper Paper width : 80mm Paper thickness : 60±5㎛ Outer diameter : Ø80mm or less Recording side : Outside of roll Cautions 1. Do not paste the paper to the core. And the roll paper which has near end mark printing on its near end is recommended. 2. Chemicals or oil may change the color of paper, or printed characters may fade. 3. Change of paper color starts from approx. 70℃.