GGGGGGGGGG G G G GG G G MODEL PORTI-P40 (PANEL PRINTER) G G G G G G G G G G G G G G G G G G G G G G G G G G WOOSIM SYSTEMS Inc. #501, Daerung Technotown 3th, 448, Gasan-Dong, GeumChun-Ku, Seoul, Korea Tel : +82-2-2107-3700 Fax : +82-2-2107-3707 URL: http://www.woosim.
G G Copyright PORTI-P40 panel printer operator’s manual. G Copyright Ꮧ2007 by Woosim Systems Inc. G All rights reserved. G The information contained in this manual is the property of Woosim Systems Inc. G And may not be reproduced in whole or in part without the prior written permission of G Woosim System Inc࣋ G G G Trademark G a registered trademark of Woosim Systems Inc. G G All other trademark are the properties of their respective companies.
G G Introduction The PORTI-P40 is an extremely simple and functional panel printer. G It is the ideal solution for applications which require the immediate printing of data on G a paper, whether they be of an industrial, G professional or laboratory nature. G G Medical analyzer, Industrial instrument, Recorder, Geological analyzer, Underground G analyzer, Chemical analyzer, Metallic analyzer, etc.
G Operating Precautions G G Please follow the precautions below to enjoy and maintain the full performance of the printer. G G X Using the Printer G G G Ɣ Be careful not to drop or bump the printer on a hard surface. Ɣ Do not install the printer in direct sunlight or such areas.
CONTENTS 1. Outline ............................................................................................................................................6G 1.1. Model classifications .................................................................................................................6G 1.2. Product Part Number System.....................................................................................................7G 1.3. Specifications ...................................................
XUGvG XUXUGtGG G G G G G G PORTI–PG G OGPG G G OG G G PG G OG G G PG G G Model name G G Interface G None : Serial(UART or TTL) G G G Size of roll paper G 40 : 57mm wide, 40 Ø G G G Power G None : DC 9V G G G G GGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGG G G G G G G G G G G G aVVUUG YWW_TW^TW^G ]
XUYUGwGwGuGz G G Model name G G G G G G G G G G G G G Interface Spec. G G G G S40 G SC30 W25 G G . . G . G Wired G Wireless A RS-232C 1 Bluetooth B TTL 2 IrDA C USB 3 HPIR D RS-485 0 None E Parallel Z None G Example) 1. Porti-S40 2. Porti-SC30 G G / Serial/Bluetooth Part No. ൽ S40/A1 Bluetooth Only Part No.
XUZUGzG G Item Specification Printing method Direct thermal line printing Characters per line 42cpl Character size Eng. : 9*24dots, 12*24dots Resolution 203dpi, 8dots/mm Print width 2-inch (48mm, 384dots) Printing speed 50mm/sec Dimensions 80 * 75 * 40 mm Weight 153g Interface Serial(UART, TTL) Paper supplied Thermal roll paper (57mm wide, 40ø) G G G G Kor.
YUGzGGGG YUXUGwGMGhG G G G When unpacking your printer box make sure it contains the printer and all accessories.
YUYUGwGmG G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G aVVUUG YWW_TW^TW^G XW
YUZUGpG G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G aVVUUG YWW_TW^TW^G XX
YU[UGyGGGG G G Note : Be sure to use paper rolls that meet the specifications. G G Do not use paper rolls that have the paper glued to the G core because the printer cannot detect the paper end G correctly. G 1. Make sure that the printer is not receiving data; otherwise, data may be lost. G 2. Open the paper roll cover by applying your finger on both side of printer, G push it up when the lock is released as shown in the drawing.
G 5. Be sure to note the correct direction that the paper comes off the roll. G G G G G G G G G G G G G G G G G G G 6. Pull out a small amount of paper and then close the cover as shown. G G G G G G G G G G G G G G G G G G G G 7. Tear off the paper as shown.
YU\UGzGGG G G G G G G G G G G G G G G 1. Press the MODE Button until the Error Lamp twinkles 5 times. G 2. Change the mode and option using the MODE Button according to the MODE (Table1). G z MODE button : use for changing OPTION status. (Error Lamp) G z FEED button : use for changing MODE status.
G G G X Press FEED button one time, Power Lamp twinkles twice and Error Lamp twinkles one time. o Press the MODE Button two times, and the Error Lamp twinkles three times. G G G G (The baud rate has set to 38,400 bps) X Press FEED Button one time, Power Lamp twinkles 3 times and Error Lamp twinkles 2 times. o Press MODE Button one time, Error Lamp twinkles one time. G G G G (The Data Bit has set to 7 Data bit) X Press FEED Button one time, Power Lamp twinkles 4 times and Error Lamp twinkles 1 time.
G G G G POWER Lamp ERROR Lamp (Green) (Red) Option G G 1 UART 2 Protocol UART 1 9600 bps 2 19200 bps 3 38400 bps 4 57600 bps 5 115200 bps 1 7 Data bit 2 8 Data bit 1 No Parity 2 Even Parity 3 Odd Parity 1 1 Stop Bit G 2 2 Stop Bit G 1 Density Low 2 Density Medium 3 Density High 1 No use G 2 Use G 1 Low 2 Medium1 3 Medium2 4 High Communication G Port 1 G G G Baud Rate 2 G G G G Data Bit 3 G G G Parity Bit 4 G G G Stop Bit Density 5 6
G G YU]UGwG G G G G G The following specifications are requested for Power supply. INPUT : DC 9V / Max 3A G G G Avoid using power supply which its power capacity of power current is extremely high.
G ZUGpG ZUXUGzGpG G G G G G G G G G G G The Porti-P40 printer has a serial(UART or TTL) serial interface and power G connector is connected by 6 pin female connector. G In the following table, the signals present on the connector are listed: G G G G Pin no. Signal name Direction Function G G 1 INPUT - 9V/3A G G 2 TxD Output Transmit Data G G 3 RxD Input Receive Data 4 N.C - - 5 N.
[UG|GGG G G G G G G G G G G G G G G G G G G G G G G G G G G G G G [UXUGjGG G G G G G G G G G G G G X Button G - FEED : When the printer is on, paper can be feed manually by pressing and G holding the FEED button for more than one second. G G X Panel Lamp G - POWER(Green) : Printer is ON and ready to receive data. G - ERROR (Red) : Indicates a fault condition or a printer error. G (i.e : no paper, paper cover opened. etc.
\UGjGwG \UXUGyGG G Type : Thermal Paper G Paper width : 57mm G Paper thickness : 60±5༁ G Outer diameter : Ø40mm G Recording side : Outside of roll G G G G Cautions 1. Do not paste the paper to the core. And the roll paper which has G near end mark printing on its near end is recommended. G 2. Chemicals or oil may change the color of paper, or printed characters may fade. G 3. Change of paper color starts from approx . 70ఁ.
