Woojer Strap Series 3 User Manual What’s in the Box • • • • Woojer Strap Series 3™ USB-C cable Soft pouch User manual Woojer Strap Series 3™ Overview 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. Power/Bluetooth button Power/Bluetooth source indicator Charging indicator Bluetooth Headphones indicator Bluetooth headphones indicator Volume Up button Volume Down button Volume indicator Sensation Up button Sensation Down button 3.
First time usage Woojer app Scan the following QR to install Woojer app on your mobile or browse to www.woojer.com/woojerapp Follow the onscreen instructions to set up your Woojer. Woojer app lets you easily control your Woojer, pair it with other devices, update its firmware, finetune your experience, get updates for content, special deals, news and much more. For the best experience, it’s highly recommended to install Woojer app on your mobile.
Woojer Strap Series 3™ LED Indicators Power Indicator Solid green – Strap is on, no audio source connected Solid blue - Strap is on, audio source connected Bluetooth Source Indicator Solid blue – Bluetooth audio source connected Blue, slow blinking - Searching for a Bluetooth audio source Red/blue, fast alternating blinking – Bluetooth Audio source pairing Bluetooth Headphones Indicator Solid blue – Bluetooth headphones connected Blue, slow blinking - Searching for Bluetooth headphones Red/blue, fast altern
Connecting to an Audio Source Woojer Strap Series 3™ can be connected to various audio sources using either wired connection or wireless Bluetooth. Choose the right diagram according to your hardware and follow the connection instructions. For other hardware types, or special hardware setups, please visit our support portal at www.woojer.com/support Gaming Console • • Connect your console’s controller to the Strap’s 3.5mm audio-in port, using an audio cable.
Connecting to Headphones Woojer Strap Series 3™ can be connected to either wired or Bluetooth headset. When turning on, it will first search for previously paired Bluetooth headset. Note: For Bluetooth connection, we highly recommend using the Woojer app. Bluetooth Headset Connection Manually (without Woojer app) • • • To enter headset pairing mode, press and hold the Power button and the Volume Up button for 5 seconds. The Bluetooth Headphones Indicator will blink alternately with red and blue.
Wearing the Strap • Position your Strap: Around your chest / on your waist / against your spine. • Adjust size by extending or reducing strap length. Playing Once you’ve connected the audio source device and headset to the Strap: • • • Play your content from the connected source device. Use Woojer app for accurate synchronization between audio and haptic. Use the Strap’s control buttons to adjust the headphones output levels and sensation levels.
• • • • Avoid using headphones/earphones at high volume. Hearing experts advise against continuous loud and extended music play. Keep the volume at a moderate level, so that you are better able to hear outside sound. Do not use your Woojer Strap Series 3™ while it is charging. If Woojer Strap Series 3™ overheats excessively during use, do not use it and contact our technical support team through www.woojer.com/s Avoid charging your Woojer Strap Series 3™ at extremely high or low temperatures.
Warranty 12 months from purchase. You can learn more about the warranty through this QR code. Add link to warranty page/paragraph. This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada’s licence-exempt RSS(s). Operation is subject to the following two conditions: (1) This device may not cause interference. (2)This device must accept any interference, including interference that may cause undesired operation of the device.
