Certification Exhibit FCC ID: SNA-WFC3 IC: 9458A-WFC3 FCC Rule Part: 15.247 IC Radio Standards Specification: RSS-247 ACS Project: 15-2122 Manufacturer: Woodstream Corporation Model: WFC3 User Manual 3998 FAU Blvd.
DO NOT RETURN THIS PRODUCT TO THE STORE FOR ANY REASON. CONTACT HAVAHART® WIRELESS DIRECTLY! CALL 1-800-800-1819, OPTION 1. Havahart ® Wireless Woodstream Corporation 69 North Locust Street Lititz, PA 17543 | 1-800-800-1819 www.HavahartWireless.com Instruction Manual PRIOR TO INSTALLATION Fully Charge the System Controller and Batteries for 3 hours. AVERAGE SYSTEM SETUP TIME IS 2 HOURS.
Table of Contents Welcome Table of Contents Congratulations and thank you for choosing the Custom-Shape Wireless ® Dog Fence from Havahart Wireless — the leading innovator of digital wireless fence solutions. Featuring breakthrough, patented, wireless technology, the Custom-Shape Wireless Dog Fence is designed to maximize the freedom and safety of your dog, with minimal effort, investment and impact on your property. It is the industry’s most-advanced, wireless dog containment system.
System Components Important Safety Reminders Important Safety Reminders System Components To ensure the safe and effective operation of your Custom-Shape Wireless Dog Fence, please read and follow all safety guidelines and instructions: Model 5144G Ensure that the following components are included with your system. If a component is missing, please call 1-800-800-1819, Option 1. • The Custom-Shape Wireless Dog Fence is designed for dogs older than 6 months that weigh more than 8 pounds.
Key Definitions, Technology & How it Works Key Definitions, Technology & How it Works Key Definitions, Technology & How it Works Bases is at the same relative height throughout the home, the intersection of the 3 spherical signals is known as trilateration. As the Controller moves along the flag line, the Master Base records each trilaterated point of your wireless fence, thereby memorizing the location of the entire fence. This process of memorization is known as event stamp mapping.
IMPORTANT MESSAGE QUICK CHECKLIST Before you begin the installation process, be sure to check the following: • Make sure that you have all system components ready and available. ! 1 Setting Up the Bases Make sure your house is inside the enclosed boundary or your dog will get corrected inside your home. Installing the Bases: Your Fence Boundary / Trigger Zone should be NO closer than 10 feet to ANY ROAD, SIDEWALK OR THOROUGHFARE FOR YOUR DOG’S SAFETY.
Setting Up the Bases Setting Up the Bases Installing the Custom-Shape Wireless Dog Fence To attach using the removable wall-mount adhesive strips: Accessing the Wireless Fence Tracker: • Clean the surface of the desired location of the Base with isopropyl rubbing alcohol, wipe gently with a soft cloth and let dry. DO NOT USE household cleaners (see Figure 1.0).
Setting Up the Bases Activating the Bases: Activating the Bases (continued): 1. Once all the bases have been attached to the walls and the Wireless Fence Tracker has been installed, it is necessary to add the Bases, one at a time, to the System starting with the Master Base A. Plug the Master Base A into the power outlet. 8. 2. The indicator light will flash green to show that Master Base A is powered on. Do not plug in the other Bases yet. 3.
IMPORTANT MESSAGE 2 Setting Up the Fence Boundary/ Trigger Zone Placing Fence Boundary Training Flags: ( See Illustration E ) ! Your Fence Boundary / Trigger Zone should be NO closer than 10 feet to ANY ROAD, SIDEWALK OR THOROUGHFARE FOR YOUR DOG’S SAFETY. START END 1. Use the blue flag to mark your starting point. Place boundary flags in the ground, 6 feet apart from one another to establish the desired perimeter of your boundary. You do not need to place flags across driveways. 2.
Setting Up the Exclusion Zones Setting Up the Fence Boundary/Trigger Zone Installing the Custom-Shape Wireless Dog Fence IMPORTANT MESSAGE Removing/Resetting System Bases: Should you need to move a Base(s) to provide a more accurate fence boundary, or because you move, relocate or because of interference from objects inside or outside the home (such as bushes, trees or other large objects), follow these steps: ® 1. Make sure the Havahart Wireless Collar is not on your dog. 2.
Setting Up the Exclusion Zones Setting Up the Exclusion Zones Installing the Custom-Shape Wireless Dog Fence Placing Exclusion Zone Training Flags: 1. Recording an Exclusion Zone: Similar to fence boundary training flag placement, place flags in the ground, six feet apart from one another to establish the desired Exclusion Zone boundary. The blue flag is not required for Exclusion Zone boundary setup (see Illustration G). 2. Using the Controller, select “ExZones” from the main menu (see Screen 4.2).
Setting Up the Exclusion Zones Setting Up the Exclusion Zones Installing the Custom-Shape Wireless Dog Fence Naming an Exclusion Zone: Removing an Exclusion Zone: 1. Select “ExZones” from the main menu (see Screen 4.2). Should you have the need to permanently remove an Exclusion Zone, follow these steps: 2. Press “Name ExZone” (see Screen 5.0). 3. Press the Exclusion Zone name that you would like to change (see Screen 5.1). 4.
Setting Up the Collar(s) Setting Up the Collar(s) Installing the Custom-Shape Wireless Dog Fence ! IMPORTANT MESSAGE IMPORTANT MESSAGE 4 Setting Up the Collar(s) The Collar should not be placed on your dog until after you have successfully installed it on the system. Collar Features: D F - E + The system allows you to activate up to 2 Collars using the Controller. Before initiating the setup process, make sure to install a fully charged RCR123 Battery in the Collar. 1.
Setting Up the Collar(s) Setting Up the Collar(s) Installing the Custom-Shape Wireless Dog Fence IMPORTANT MESSAGE ! Adjusting the Correction Level of a Collar: 1. To adjust the correction level of a Collar, first select “Collars” from the main menu (see Screen 6.2). 2. Press “Edit Collar Correction Level” (see Screen 7.7). 3. Press Collar that you wish to adjust (see Screen 7.8). 4.
Setting Up the Collar(s) IMPORTANT MESSAGE Fitting a Collar: • Remove the low Battery from the Collar. To ensure the safe and effective operation of the system, it is important to make sure that the Collar is fitted properly. + Recharging a Battery: • Make sure the Battery Charger is properly connected to a grounded 120V AC outlet.
Wireless Fence Tracker Software Options Wireless Fence Tracker Software Options Installing the Custom-Shape Wireless Dog Fence 5 Wireless Fence Tracker Examples Testing the Trigger Zone (continued): It is normal for your Trigger Zone to have some imperfections as shown above. This should not be a problem for the successful operation of your wireless fence as the Fence Boundary is still closed.
Training Your Dog Training Your Dog Training Your Dog IMPORTANT MESSAGE ! PRELIMINARY PHASE -- Flag Awareness Training - Optional (2-3 training sessions per day: each 10-15 minutes long) IMPORTANT REMINDERS: The Custom-Shape Wireless Dog Fence is not a physical boundary. It is necessary to contain your dog using a leash or other means during training.
Training Your Dog Training Your Dog Training Your Dog PHASE 1 -- Passive Training -- DAY 1-3 (2-3 training sessions per day: each 10-15 minutes long) ® PHASE 2 -- Active Training -- DAY 4-7 (2-3 training sessions per day: each 10-15 minutes long) 1. Set the correction level to Static Level 1 (see Page 23). 2. To ensure the system is working properly, take the Havahart Wireless Collar to the Trigger Zone and use the Heart-Shaped Collar Tester (see Page 23).
Training Your Dog Training Your Dog Training Your Dog PHASE 3 -- On-Leash Distractions -- DAY 8-11 (2-3 training sessions per day: each 10-15 minutes long) 1. 2. ® PHASE 4 -- Off-Leash Supervision -- DAY 12-15 Begin with short training sessions 10-15 minutes in length and gradually increase the sessions to an hour or more Fit the Havahart Wireless Collar around your dog’s neck. Place a ® different non-metal collar above the Havahart Wireless Collar and attach a leash to it.
PHASE 5 -- Dog Monitoring -- DAY 16 AND BEYOND Start with short sessions and gradually increase duration 1. Your dog should now be comfortable within the Roaming Area and reluctant to cross the Trigger Zone with or without distractions. 2. Fit the Havahart Wireless Collar around your dog’s neck. Place a different non-metal Collar above the ® Havahart Wireless Collar. 3. Allow your dog to roam freely off leash within the Roaming Area. 4. Keep an eye on him from inside your house. 5.
Warranty Information 1. Terms of Use This Product is offered to you conditioned upon your acceptance without modification of the terms, conditions and notices contained herein. Usage of this Product implies and acknowledges on your behalf acceptance of all such terms, conditions, and notices. Custom-Shape Havahart Wireless Dog Fence 10 Year Parts & 12 Month Labor 2. Proper Use This Product is designed for use with dogs as a training aid.
1: RF exposure statement “This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment is in direct contact with the body of the user under normal operating conditions. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.” “Cet equipement est conforme aux limites d’exposition aux radiations dans un environnement non controle.