Certification Exhibit FCC ID: SNA-WFC2 IC: 9458A-WFC2 FCC Rule Part: 15.247 IC Radio Standards Specification: RSS-210 ACS Report Number: 11-0003.W06.25.A Manufacturer: Woodstream Corporation Model: WFC Manual 5015 B.U.
Radial-Shape Wireless Dog Fence DO NOT RETURN THIS PRODUCT TO THE STORE FOR ANY REASON. CONTACT HAVAHART® WIRELESS DIRECTLY! CALL 1-800-800-1819, OPTION 1. Instruction Manual Havahart ® Wireless Woodstream Corporation 69 North Locust Street Lititz, PA 17543 | 1-800-800-1819 www.HavahartWireless.
Table of Contents Welcome Table of Contents Congratulations and thank you for choosing the Radial-Shape Wireless ® Dog Fence from Havahart Wireless - the leading innovator of digital wireless fence solutions. Featuring breakthrough, patent pending wireless technology, the RadialShape Wireless Dog Fence is designed to provide maximum freedom and safety for your dog and peace of mind for you with minimal effort, investment and impact on your property.
System Components Important Safety Reminders Important Safety Reminders System Components To ensure the safe and effective operation of your Radial-Shape Wireless Dog Fence, please read and follow all safety guidelines and instructions: Model 5134G Ensure that the following components are included with your system. If a component is missing, please call 1-800-800-1819, Option 1. • The Radial-Shape Wireless Dog Fence is designed for dogs older than 6 months that weigh more than 8 pounds.
Key Definitions, Technology & How it Works Key Definitions, Technology & How it Works Key Definitions, Technology & How it Works Key Definitions: How it Works: Roaming Area: Area between the Controller and the Trigger Zone where your dog is free to roam and play. Capable of expanding the fence radius from 40 feet up to 400 feet. Both the Havahart Collar and the Controller contain nanoLOC TRX 2.
IMPORTANT MESSAGE Planning Your Wireless Fence Boundary: ! Your Fence Boundary/ Trigger Zone should NOT be closer than 10 feet to ANY ROAD, SIDEWALK OR THOROUGHFARE FOR YOUR DOG’S SAFETY. ® The most important step in setting up your Havahart Radial-Shape Wireless Dog Fence is determining the proper location to mount the Controller. Choose a location inside the home on an outer wall nearest the center of the desired circular containment area (see Factors Affecting Signal Strength on Page 25).
Setting Up the Controller Setting Up the Controller Installing the Radial-Shape Wireless Dog Fence IMPORTANT MESSAGE 2 Setting Up the Collar Installing a Battery: 1. Make sure a Battery is fully charged before installing it in the Collar (see Recharging a Battery on Page 12). Turn the Battery Cap on the Collar counterclockwise about 1/4 turn and pull it out. With the positive side facing outward, install one RCR123 Battery into the Collar (see Figure 1.4).
Setting Up the Collar Setting Up the Collar Installing the Radial-Shape Wireless Dog Fence IMPORTANT MESSAGE NOTE: The Collar (Collar ID=1) has already been added to the Controller and set to Tone Only. You may skip Activating a Collar & Adjusting the Correction Level of a Collar unless you need to add another Collar. Activating a Collar: 1. On the Controller... • Select Setup Menu (see Screen 1.0). • Select Collar Setup (see Screen 1.1). • Select Add a Collar (see Screen 1.2).
Setting Up the Fence Boundary/Trigger Zone ! IMPORTANT MESSAGE Setting Up the Fence 3 Boundary/Trigger Zone Establishing the Fence Boundary/Trigger Zone Distance: Estimate the distance between the Controller and the desired boundary location. This distance will be the radius of the Trigger Zone all the way around the Controller. NOTE : Use the shortest distance to a property boundary as a starting point for the radius of the Trigger Zone (see Illustration B). 2.
Fitting a Collar Setting Up the Fence Boundary/Trigger Zone Installing the Radial-Shape Wireless Dog Fence IMPORTANT MESSAGE 4 Fitting a Collar Display Options: Viewing Distance to Dog and Battery Status (see Screen 2.3): • Select Display Options (see Screen 2.1). • Select Show Collar Monitor (see Screen 2.2). NOTE: See Battery Status Level meanings on Page 12. To ensure the safe and effective operation of the system, it is important to make sure that the Collar is fitted properly. Screen 2.
IMPORTANT MESSAGE Important Collar Safety Guidelines: ! IMPORTANT MESSAGE ! IMPORTANT REMINDERS: 1. During training, do not let your dog wear the Collar without direct supervision. 2. Each time you take the Collar off your dog, look for any indication of a sore or rash. 3. Should you find any indication of a sore or rash on your using the Collar for a few days. Training Your Dog Fitting a Collar Training Your Dog Installing the Radial-Shape Wireless Dog Fence do stp g, 4.
Training Your Dog Training Your Dog Training Your Dog PRELIMINARY PHASE -- Flag AwarenessTraining - Optional (2-3 training sessions per day: each 10-15 minutes long) PHASE 1 -- Passive Training -- DAY 1-3 (2-3 training sessions per day: each 10-15 minutes long) Completing this phase will add 3 days to your training, but will give your dog more time to get used to the Training Flags if you choose to complete it. 1. Turn ON the fence (see Page 14) and set the correction level to Tone Only (see Page 11).
Training Your Dog Training Your Dog Training Your Dog PHASE 2 -- Active Training -- DAY 4-7 (2-3 training sessions per day: each 10-15 minutes long) PHASE 3 -- On-Leash Distractions -- DAY 8-11 (2-3 training sessions per day: each 10-15 minutes long) 1. Set the correction level to Static Level 1 (see Page 11). 1. 2. To ensure the system is working properly, take the Havahart Collar to the Trigger Zone and use the Heart-Shaped Collar Tester (see Page 14).
Training Your Dog Training Your Dog Training Your Dog PHASE 4 -- Off-Leash Supervision -- DAY 12-15 PHASE 5 -- Dog Monitoring -- DAY 16 AND BEYOND Begin with short training sessions 10-15 minutes in length and gradually increase the sessions to an hour or more Start with short sessions and gradually increase duration 1. Do not leave your dog unattended during this phase of training. 1.
Troubleshooting IMPORTANT MESSAGE IF ANY OF THE SOLUTIONS TO YOUR ISSUES CANNOT BE FOUND, PLEASE CALL 1-800-800-1819, Option 1 or visit www.HavahartWireless.com NOTE: Once your Fence Boundary / Trigger Zone is established, it will remain consistent. Various objects can interfere with the wireless signal strength of your Wireless Fence, resulting in a gradual loss in the measured distance of the radio signal from the Controller to a set Trigger Zone.
Troubleshooting Troubleshooting Troubleshooting Issue: ® The Havahart Collar is not beeping or delivering a static correction. Solution: Issue: • The LCD screen on the Controller is not on. • • • ® The Havahart Collar is beeping everywhere. ® The Havahart Collar is beeping inside the home. • • • • • • • • • 27 ® The Havahart Collar is beeping in the middle of the yard.
1. Terms of Use This Product is offered to you conditioned upon your acceptance without modification of the terms, conditions and notices contained herein. Usage of this Product implies and acknowledges on your behalf acceptance of all such terms, conditions, and notices. 2. Proper Use This Product is designed for use with dogs as a training aid. Because of the specific personality, temperament, size and age of your dog, this Product may not be appropriate for your dog.
