User Manual

ManualsBrandsWoodstream ManualsElectronicsV430 Rat Snap Trap

1. ACCOUNT SET-UP

2. CONNECT THE GATEWAY

3. DOWNLOAD THE APP

Plug in the gateway.

If you are planning to use your local network, plug your

ethernet cable into the ethernet port.

1. Search for the Victor VLINK® app from the Apple App Store

or Google Play Store and download to your device.

3. Launch the app and follow the on-screen instructions to

connect your trap to the app.

1. Hold the back end of the trap, place

both thumbs on the thumb grips.

2. Pull bar back into the easy-set

latch until it clicks and locks.

3. Take notice of LED light sequences

on the back left corner of the trap.

5. CONNECT TRAP TO THE NETWORK

Once your trap is connected, place it in the area of rodent

activity and wait for the trap to alert you of a capture.

6. PLACE TRAP

1. If a rodent has been captured, record your kill data using the

VLINK Mobile App.

2. Once the rodent is removed, the trap is ready to be baited

and reset for another capture.

3. To reset, simply pull the kill bar back to the set position

and wait for the green and blue LED flashes to let you know

the trap is communicating and ready for another kill.

Pro Tip: Avoid using strong cleaning products on the traps.

A captured rodent can leave behind scent and odor that can

make the trap more attractive to other rodents.

7. RESET TRAP AFTER A KILL

LED Light Sequences

NOTE: Setting the trap can only be successfully accomplished

if the trap is level. If it is tilted significantly, it will not set.

1. Green Flash When Set: The trap Is

set and fully powered on.

2. Yellow Flash: The trap is disengaged

and in power saving mode.

3. Red Flash When Set: The trap is set

but the battery is low.

4. Blue Flash: The trap successfully

communicated with the network.

For all other gateway instructions, refer to the manual

provided with the unit.

1. Before you begin, confirm that you have a VLINK account

created and an Admin has added you to the account. Contact

your VLINK sales representative for confirmation if you are

unsure.

2. Confirm that you can successfully log-in at www.vlinkhq.com.

2. Log-in using your VLINK® account credentials.

Paste Baits

1. Place paste baits in the bait cup container.

2. Place bait in cup firmly to prevent it

from being pulled out easily by the rodent.

3. Placing bait on the trigger petal may lead

to non-capture triggers.

Tied Baits

1. Tie desired bait to raised Victor® V.

2. Orient bait towards middle of trap pedal.

4. BAIT TRAPS

START-UP GUIDE

Kill-Bar/Antenna

LED

Indicator

Light

Bait Cup

Bait Tie

Down

Easy-Set

Latch

Kill-Bar

Set Bar

Thumb Grips

QR Code

Label

Rodent Grabbing

Teeth

Trap

Mounting Holes

Victor

VLINK

Mouse Trap Model: V420 | Victor

VLINK

Rat Trap Model: V430

Summary of content (2 pages)

PAGE 1
. ACCOUNT SET-UP ® 1. Before you begin, confirm that you have a VLINK account created and an Admin has added you to the account. Contact your VLINK sales representative for confirmation if you are unsure. START-UP GUIDE 2. Confirm that you can successfully log-in at www.vlinkhq.com. Set Bar Thumb Grips LED Indicator Light Rodent Grabbing Teeth 2. CONNECT THE GATEWAY Plug in the gateway.
PAGE 2
1. CONFIGURATION DU COMPTE ® 1. Avant de commencer, confirmez que vous avez un compte VLINK créé et qu'un administrateur vous a ajouté à ce compte. En cas de doute, contactez votre représentant commercial VLINK pour obtenir une confirmation. GUIDE DE DÉMARRAGE Poignées de la barre d’activation Témoin lumineux DEL 2. Confirmez que vous pouvez vous connecter avec succès à l'adresse www.vlinkhq.com. Dents attrapant les rongeurs 2. CONNECTER LA PASSERELLE Branchez la passerelle.