Victor® Smart-il™ Electronic Mouse Trap Model: M1 Victor® Smiart-Kil™ Electronic Rat Trap Modal: M2 T His DEVICE COMPLIES WITH PART 15 QF THE FOC RULES.
frequency energy and, if not installed and used in accordance with the Instructions, may cause harmful interference fo radio communications.
dry, clean surfaces, Do not use near invented flammable vapors, liquids, or combustible sods, Do riot use in bans, stables, or similar wet or dusty locations High Voltage: Keep out of reach of children and pets. Use only dry hands or rubber gives to handle. Power OFF and separate units before baiting.
understand the hazards involved. Cleaning and user maintenance shall nat be mad by children without supervision. MOUSE TRAP BATTERIES: 4 AA catteries are needed to operate this rap. insert and remove batteries 2s indicated in the instructions. Non-rechargeable batteries are not to be recharged Rechargeable batteries are to be removed from the appliance before being charged Different types of batteries or new and used ars not to be mixed.
BAT TRAP BATTERIES: 4 C batteries are needed io operate this trap. Insert and remove batteries as indicated in the instructions. Neb-rechargeable batteries are not to be recharged. Rechargeable batteries are to be removed from the appliance before being charged. Different types of batteries or new and used are not {0 be mixed.
Yeu WH Heine: « A smart phone, tablet ar similar connected movie device. = Broadband internet connection. Da NOT use a phonetically hot spot. = A strong WI-Fi signal where trap wil be placed, «Password for your home network. «A Victor® Smart-Ki™ ap = A set of brand new batteries (4 "AA" for the mouse trap, 4 °C" for the rat trap) Important ole = (nce a rodent is caught, a ratification is sent fo your connected device If if is connected fo the Victor® Pest App.
= You can share your experience through soc la’ media within the App. = The trap will steel operate without being connected to WI-Fi. However, you will not receive notifications upon catching a rodent and will need to regularly check the trap. + Visit: wa victimless microelectronics for customer support STOP! If you have questions or problems with our purchase do not return it fo the retail store. Please contact us directly for Immediate assistance af 1-855-5-VICTOR.
If you see: «gw WI-Fi signal is strong You're all sat! & WI-Fi signal is weak. Your Victor® Smart-Kil™ {rap wil likely connect to your WI-Fi network, but connection may be intermittent + No WI-Fi signal: Try one of the following: © Move your router closer to your Victor® Smart-ii™ trap. » Buy a WI-Fi range extender Indications that the trap did not successfully connect fo WI-Fi during setup: « A network/server error has occurred if the bite WI-Fi light and the red Victor® “vy light stay on for 5 seconds.
+ Hers should | place my trap? Traps can be placed anywhere indoors. Place rap against a wal where rodent activity is frequently seen. « Where is my rapper code? The QR code Is located on the bottom of the mouse trap and the back of the rat trap.
+ How much bait do | need? The trap has a bait cup that shows you exactly how much bait fo use. Do not overfill the bait cup. Do not place blat on the metal plates. Doing so may interfere with the electrical functionality and your trap may not work unless you completely clean the bat off. © How Ld | dispose of a caught mouse? Press the power button to um the unit "OFF". Open the kill chamber door and properly discard rodent. Clean and bait trap naffer each use for most effective results.
« How do | dispose of a caught rat? Press the power button fo furn the unit “OFF.” Property discard rodent. Clean and bait rap after each use for most effective results. Press power button to tum the unit back on.
at ate Download the free Vietor® Pest App from the Apple App Store® or Android Google Play™ store. Check that the unit is muted "OFF by making sure the power button Is not pressed down. Insert batteries into the battery compartment and launch the Victor® Pest App. #2. Connect your rap by flowing the instructions on screen. Step by step instructions are also in this guide. 4. Once the power button and WI-Fi button have been pressed during the initial setup, users wil have 5 minutes to successfully finish.
Important Note: Some screens, instructions and settings may differ slightly depending on what device you are using. 4. Press Power Bullion Press the power button to tum the rap on. The Victor® “V° will blink green 3 times 2. Press and Hold WI-Fl Button for § Seconds The WI-Fi button will blink blue 10 mes while the trap Is connecting.
%. Span Trap Code Center the rap's code in the window on the screen. The rap code is the GR code located on the bottom of the mouse rap and the back of the rat trap. See FAQ page for images of GR code locations.
3. Sean Trap Gide (Continued) if you have trouble successfully scanning the code, fry changing the distance between the trap and mobile device, Alternatively you can enter the 15 sigh alphanumeric code manually by pressing the “ENTER CODE MANUALLY" text found on the bottom of the screen. Enter the serial number found next fo the QR code on your rap.
4, Connect Mobile Device to Trap Go to WI-Fi settings on your device by pressing the red “G0 TO SETTINGS” button. Select the rap, which is VICTOR followed by 15 alphanumeric digits. (Bx: VICTOR-WM170818BECD004). Press "Contact, then press the back button.
5. Connect Trap to WI-Fi Select the WI-Fi network to connect the trap to Enter the network password for the WI-Fi network, then press the red “Connect” button.
&. Connected A notification appears when the trap successfully connects. Press the red “Next” button and continue to step number 8.
7. Unable to Connect If your trap did NOT successfully connect, go to the Settings menu of your mobile device, then select the WI-Fi option.
7. Unable to Connect (Continued) Find the trap name (Bx: VICTOR: Wh1 7081BBE0DOD4) and select it. Select "FORGET" Fowler trap off, then repeat steps 1 through 7. If the trap still does not connect, visit the Trouble Shooting section or call 1-B55-5-VICTOR for immediate assistance.
&, Mae Your Trap After successful connection, name the trap and press the red "Next" button. ©. Alt and Place Trap Swipe through the three instruction screens on baiting and placing the trap, then press the red “Done button Visit the Frequent Asked Questions section for more information on baiting and placing the trap.
Ee 1. Download the free Vietor® Pest App from the Apple App Store® or Android Google Play™ store. Check that the unit is tuned “OFF" by making sure the power button is not pressed down. Insert batteries into the battery compartment and ‘launch the Victor® Pest App. 2, Connect your trap by following the instructions on screen. Step by step instructions are also in this guide. 4.
Important Noels: Some screens, instructions and settings may differ slightly depending on what device you are using. 1. Press Power Button Press the power button to turn the trap on. The Victor® “Vv will blink green 3 times. 2. Press and Hold WI-Fi Button for 5 Seconds The WI-Fi button will boink blue 10 times while the trap Is connecting.
3. Scan Trap Code Center the rap's code in the window on the screen. The rap code is the OR code orated on the bottom of the mouse trap and the beak of the rat trap. See FAQ page for images of QR code locations.
3. Scan Trap Code (Continued) If you have trouble successfully tanning the code, try changing the distance between the trap and mobile device. Alternatively vou can enter the 15 digit alphanumeric cote manually by pressing the "ENTER CODE MANUALLY" text found on the bottom of the screen.
4, Connect Mobile Device to Trap Go fo WI-Fi settings on your device by pressing the red "GOT SETTINGS” button. Select the trap, which is VICTOR followed by 15 alphanumeric digits. (Ex: VICTOR-WM170818BE000D4) Press the back button on the device's top menu bar to velum to the Victor® Pest App.
4, Connect Trap fo WI-HA Press the red “Next” button to go to WI-Fi settings Choose the WI-Fi network you wooed like your trap fo connect to.
5, Connect Trap to WIFI (Continued) Enter the network password for the WI-Fi network, then press the red “Submit” button.
&. Reconnect Mobile Device to Gos to the WI-Fi settings on your device by pressing the red “Go to Settings” button. Choose a WIFI network, Most devices will automatically re-connect fo the most recently selected WI-Fi network. If it does not, select it.
&. Reconnect Mobile Device fo WIFI {Continued} Press the red "Next" button. may take up to 1 minute to connect.
7. Connected A notification appears when the rap successfully connects. Press the red “Next” button and continue To step number 9. 8. Connection Error 1 your trap did NOT successfully connect, visit the Trouble Shooting section of this mania’ or click *Connection Help” on screen.
§. Mae Your Trap After successful’ connection, name the trap and press the red “NEXT” button. 40. Alt and Place Trap Swipe through the three instruction screens on halting and placing the trap, then press the red “Done” button.
1. Press the power button fo turn the {rap OFF, then remove the batteries. = Hold the trap with the battery compartment In your left hand, buttons facing upwards and the rodent entrance facing towards you. 2. With your right hand push forward and 5 separate the ki A chamber from the electronics housing. 3. The Kill chamber is £3 new ready for 2 craning Nepenthe FL 2° rodent disposal door.
remove ary corrosion, being careful not fo be too vigorous This could accidentally remove 2 of the protective zinc plating 4. Thoroughly dry the interior and exterior of the kill chamber prior to trap reassembly. §. To reassemble rap, hold the battery compartment in your eft hand, buttons facing upwards Hold the kil! chamber in your right hand with the rodent entrance facing towards you.
4. Press the power bunion to turn the trap OFF, then remove the batteries. Open the trap by holding the base of the trap with your left hand and siding the top backwards with your right hand about cre inch. Pui the top away from the base. he a Ors 2. The kill chamber is now ready for cleaning. Use a hydrogen peroxide topical solution (available at most drug stores) and an old toothbrush 1p clean the inside of the chamber.
3. Thoroughly dry the interior and exterior of the kill chamber prior to Trap reassembly. 4. To reassemble trap, Eg hold the base of the trap with your left hand and side the top into pace by pushing forward with your right hand fo reconnect the pieces.