Instructions / Assembly

ManualsBrandsWOODBRIDGE ManualsBathPrinceton Single-Handle Freestanding Floor Mount Tub Filler Faucet with Square Hand Held Shower in Brushed Nickel

WOODBRIDGE

0119328 REV. 1

Email: help.woodbridge@gmail.com

PREPARATION FOR INSTALLATION

ATTENTION! Dimensions may vary by up to 3/8". It is highly recommended to pull

all dimensions of actual model for installation and measuring purposes.

ATTENTION! Measurements in inches are rouned to the nearest 1/8".

TECHNICAL DATA

Max flow rate 2.5 GMP at 60 PSI

FREESTANDING FAUCET

WOODBRIDGE

35 1/2"

34 3/8"

8 3/4"

2 7/8"

6 7/8"

Summary of content (4 pages)

PAGE 1
WOODBRIDGE R FREESTANDING FAUCET PREPARATION FOR INSTALLATION 6 7/8" 2 7/8" 35 1/2" 34 3/8" 8 3/4" 6" ATTENTION! Dimensions may vary by up to 3/8". It is highly recommended to pull all dimensions of actual model for installation and measuring purposes. ATTENTION! Measurements in inches are rouned to the nearest 1/8". TECHNICAL DATA Max flow rate 2.5 GMP at 60 PSI Email: help.woodbridge@gmail.com 0119328 REV.
PAGE 2
WOODBRIDGE R FREESTANDING FAUCET PARTS & COMPONENTS 11 1 No 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 Component Body Screw Canopy Screw Handle Cap Press Hat Cartridge Cartridge Handle Spray Head Washer Aerator Aerator House Flexible Hose Flexible Hose Take Over Cover Screw Triangle Plank 2 3 12 4 13 14 10 9 8 7 5 6 15 16 17 18 19 20 TOOLS REQUIRED FOR INSTALLATION Basin Wrench Adjustable Wrench Teflon Tape Silicone Sealant Screwdriver OTHER TOOLS MAY BE REQUIRED 2
PAGE 3
WOODBRIDGE R FREESTANDING FAUCET INSTALLATION INSTRUCTIONS 1 Put the base cover over the pipe. 3 Install the flexible hose now and ensure the flexible hoses are hand tightened into place.(DO NOT USE SPANNER TO TIGHTEN AS IT CAN DAMAGE THE O-RING). The flexible hoses are to be fitted into the correct inlets for hot water and for cold water. 5 Fix the screw position 2 Screw the pipe to the base. 4 Fix the faucet body to the pipe. 6 Connect another side of the flexible hose to the water supply pipe.
PAGE 4
WOODBRIDGE R 7 Use the explosion screw to fix the base on the ground. and put the base cover over the base. 9 The installation is completed. FREESTANDING FAUCET 8 Connect the shower hose and hand shower. 10 After installation is complete, remove Spray head and rotate handle to the close position. Turn Water Supply Valves on, and check all connections for leak. Flush faucet by running hot and cold water in full position for one minute. Re tighten the Aerator.