User's Manual

SIZE : 70 x 110MM
Bluetooth® Speaker
Model No : CSBT-303
Product Overview
1. Volume Down / Previous song: When your speaker is
in Bluetooth® mode, pressing the button once will
decrease the volume. Holding the button down will play
the previous song.
2. Play / Pause / Hands-free: Pressing this button once
will allow you to reconnect the speaker to your device.
Holding the button down will disconnect the speaker
from you device.
3. Volume Up / Next Song: When your speaker is in
Bluetooth® mode, pressing the button once will
increase the volume. Holding the button down will play
the next song.
down the power button.
5. Reset Hole: If you speaker suddenly stops working or
does not play properly, try resetting it by pushing the
button with a thin needle.
6. Micro-USB charging port
7. Charge Indicator Light: When your speaker is
charging the light will be red. Once your speaker is fully
charged, the light will turn green.
8. AUX- in Jack
Warning
Do not replace the battery with the incorrect battery. If
you need to replace the battery, you may only use the
same type of battery or an equivalent type of battery to
replace the damaged one. The battery (battery pack or
combination battery) should not be exposed to high
temperatures.
Model No: CSBT-303
Bluetooth Version: V2.1+EDR(A2DP)
Transmission Distance: <10M (Transmission distance
devices)
Input Voltage: DC 5V
Output Power: 3W X 2
Built-in Lithium Battery: 3.7V/1200mAh
Battery Life: 3.5 hours (Volume at 50%)
2 hours (Volume at 100%)
Operation Instructions
1. To turn on the speaker, hold down the power button
located on the side of the speaker. Once the device is
turned on, Bluetooth® mode is activated. On your
device enter Bluetooth® mode and search “CSBT-303”
Connect the speaker to your device. Once your device
has successfully connected to the speaker, you will hear
When your speaker pairs with your Bluetooth® device it
may require a password. Please enter, “0000.”
2. Once your Bluetooth® device successfully connects to
your speaker, your device will enter to your music
interface. Choose the song of your choice to play and
enjoy. If you would like to connect another Bluetooth®
device to your speaker, hold the Play/ Pause /
Hands-Free button for about 3 seconds. The speaker will
enter pairing mode. Once the device is connected, the
Battery
1. When the battery power is low, a voice will prompt
telling you that the battery is low. Use the micro USB
cable to charge the speaker.
charging indicator light will be red. Once the charge is
complete, the light will turn green.
1 2 3
4
5
6
7
8