User's Manual

WT100CR operation manual

1, Touch remote controller battery install

Use AA size battery x 2

Note: DO NOT touch the “Touch Area” while placing the battery

2. Functions of Touch PAD

a. move coursor

touch and move touch-pad by finger

b. simulate mouse left button

a short touch (click)on touch pad

c. simulate mouse right button

a long touch(no moving approx. 1 second) on touch pad

3. Auto search RF receiver dongle

press and simultaneously until LED off then release keys ,

when you see blue LEDs keep ON, it means that the WT100CR is looking

for the RF dongle; when you see blue LEDs blinking quickly, it means that

both remote controller and RF dongle had been successfully connected!

Note : if you replace WT100CR battery, you have to reconnect RF dongle.

PAGE 1
WT100CR operation manual 1, Touch remote controller battery install Use AA size battery x 2 Note: DO NOT touch the “Touch Area” while placing the battery 2. 3. Functions of Touch PAD a. move coursor touch and move touch-pad by finger b. simulate mouse left button a short touch (click)on touch pad c. simulate mouse right button a long touch(no moving approx.
PAGE 2
4.
PAGE 3
mute decrease volume arrow up arrow right arrow down arrow left ENTER full screen in Windows Media Player 5. RF Receive Dongle install Plugin RF receive dongle to your PC/NoteBook USB port, PC/NoteBook find a new device and install driver automatically. This device complies with Part 15 of the FCC Rules.