F2D-Super Film to Digital Converter User Manual v1.0 Table of Contents Introduction ... 1 Before Using the Converter ... 1 Having Difficulty Using This Product ... 4 Package Contents ... 4 Functions of Keys ... 5 Connect F2D-Super to TV ... 5 Getting Started... 6 1. Attach power ... 6 2. Use Built-in Memory ... 6 3. Use Optional SD/SDHC Memory Card ... 6 4. Format/Delete All Internal Memory or the SD/SDHC Card ... 7 5. Mode Selection ... 7 6. Set Film Type ... 8 7. Select Proper Adapter or/and Insert ...
10. Edit Image Orientation ... 12 11. Change Image EV (Exposure Value) and RGB Color ... 13 12. Convert Film to Digital File ... 13 13. Playback and Edit Converted Image Files ... 14 14. Connect F2D-Super to Computer to Upload Image Files ... 16 15. Upload Image Files to PC and Delete the Uploaded Files ... 16 Technical Support ... 17 Specifications ... 18 Caution ... 19 One-Year Limited Warranty (United States Only) ... 19 Warranty Exclusions ... 21 Other Limitations ...
. . . . . . . . . . . . immediately turn off the device. Continued use of the device may result in fire or electric shock. Do not handle the device with wet hands. Doing so may cause electric shock and damages to the unit. Do not place the device close to any equipment generating strong electromagnetic fields. Exposure to strong magnetic fields may cause malfunction or data corruption. Do not expose the device to extreme temperatures, humidity or vibrations, which may cause damages to the device.
Having Difficulty Using This Product? .. . Please try the following options: Call us at 949-458-9888 M-F 9:00-5:00 Pacific Time Visit www.wolverinedata.com/support to find the latest documentation and other help tips E-mail or write to our technical support staff at support@wolverinedata.com or our address: 9939 Muirlands Blvd.
Getting Started 1. Attach Power Use included cable and power adapter to provide power, or plug cable to computer USB port directly. USB port 2. Use Built-in Memory F2D-Super has built-in memory that stores up to 35 ~ 40 digital images. After power on, "No card" will appear on the viewer for 3 seconds if optional memory card is not inserted. 3. Use Optional SD/SDHC Memory Card Do not use MicroSD memory card with card adapter on F2D-Super. It could freeze the device.
. Film Type - Selects type of film to convert, refer to Film Type Table on page 9 . Delete All - Deletes all files in the internal memory or the inserted SD/SDHC card . Convert - Converts film to digital image . Playback - Reviews all converted images stored in memory . USB MSDC - Communicates with PC or Mac to upload converted files to a computer . images Language - Sets menu in English or Japanese 6. Set Film Type Ensure the Film Type setting is correct, or you will see X-ray-like image on the viewer.
Negative Adapter flip open the Negative Adapter then place appropariate Insert accordingly (see diagram below), and snap close the adapter tightly to avoid jamming when inside the F2D-Super. Warning: Using improper Adapter or Insert will result cropped image or black areas on image. Negative Adapter Negative Adapter with Super 8 Insert with 110 Insert Negative Adapter 110 INSERT SUPER 8 INSERT Flip open 8.
Ensure the Film Type setting is correct, or you will see X-raylike image on the viewer. The film type setting will remain until changed. Insert Super 8 film with Push in negative film and Push in slide until flushed pereferated check the image from holes at top with the edge of Adapter the viewer 10. Edit Image Orientation At Convert Mode, press Mirror key to mirror the image left to right, or Flip key to flip the image upside down. You can also later rotate at Playback mode. 12 11.
2. Press OK key to save the converted digital image to memory. Or press Left or Right key to Cancel (not saved). 3. Feed another slide or push the negative film to left to convert the next film. *Note: "FULL" icon on screen means the memory is full. Upload the converted digital files to a computer, refer to item 14 on page 16. Then delete all files from the memory of F2D-Super. 13. Playback and Edit Converted Image Files 1. Press Mode key twice to go back to Home menu. 2.
14. Connect F2D-Super to Computer to Upload Image Files 1. Plug small end of the USB cable to F2D-Super and the big end to USB port on the computer. 2. Insert SD/SDHC memory card if not using the internal memory. 3. Power on F2D-Super. 4. Press Left/Right key to highlight "USB MSDC". 5. Press OK/Enter key to activate the USB mode. USB MSDC USB MSDC 15. Upload Image Files to PC and Delete the Uploaded Files After the USB mode is activated, your computer will recognize the F2D-Super as a Removable Disk.
Specifications Lens: F/3.48, f=5.12 LCD:2.4 inch LTPS LCD Display External memory: SD/SDHC card Exposure: Auto Color balance: Auto Resolution: 20 MP Data conversion: 24 bits per color channel Convert method: Single pass Light source: backlight Power: Powered from USB/5V adapter Interface: USB 2.0 Dimension: 103 x 90.5 x 104 mm Weight: 215 g Language: English and Japanese 18 Caution This device complies with part 15 of the FCC Rules.
categories: software; external devices (except as specifically noted); accessories or parts added to a Wolverine Data system after the system is shipped from Wolverine Data or its resellers; accessories or parts that are not installed in the Wolverine Data factory. During the one-year period, beginning on the invoice date, Wolverine Data will repair or replace products returned to Wolverine Data's facility.
Altered Products Product or accessories with (a) serial numbers or date tags that have been removed, altered or obliterated; (b) broken seals or that show evidence of tampering; (c) mismatched board serial numbers; or (d) nonconforming or non-Wolverine Data parts or accessories, are excluded from coverage.