Safety Information Thanks for using WOLKI WS041 ,Please carefully read the terms below: Use Safely Do not use the phone in situations where it might cause danger. Transportation Safety Please observe all transportation laws and regulations. Please drive with both hands on the wheel. PLEASE DRIVE RESPONSIBLY - DO NOT TEXT AND DRIVE Hospital Safety Please follow hospital rules and limitations. Please turn off your mobile phone when near medical instruments.
Temperature Warning Do not subject your phone to extreme temperature conditions. Water Hazard Your phone is not waterproof. Keep your phone away from water or liquid to avoid damage. Emergency Calls Make sure your mobile phone is switched on and in a service area. In home screen, tap the phone key and dial the emergency number. Accessories and Batteries Use only WOLKI authorized batteries and accessories. Information Backup Remember to keep a written record of all important information.
- Do not expose batteries to extreme temperatures (below -8°C (18°F) or above 43°C (110°F). - Immediately stop using the battery if it produces an odor, cracks and leaks, overheats, distorts or has any other type of physical damage. - Avoid using the charger near or around liquids. If the charger comes in contact with water or any liquids, immediately unplug it from the outlet to reduce the risk of overheating, charger malfunction, electric shock or fire.
Introduction Installation of the SIM Card Warning: Please keep the SIM card out of the reach of children. The SIM card and its contact are easily damaged due to scratching or bending. Please use caution when carrying, installing or taking out the SIM card. NB: Please contact your cellular phone service provider directly to obtain your SIM card. To insert SIM card: 1. Remove the rear cover. Insert the SIM card. 2. Insert the memory card. (For additional storage capacity) 3.
Call Functions At the dial keyboard, enter the phone number and then click the dial key. If dialing an extension, you may click the dial pad icon in the bottom of the screen to open the interface and enter the number of the extension. You may also press and hold the 0 key to add a (+) sign when adding an international dialing prefix. Call Options There are different options that can be used in the call log and dialing interface.
the notification bar and is located on the upper right hand part of the screen next to the clear notification icon. Contacts Enter: Click on the applications menu and select contacts. The default display is the phone contacts. The contacts are organized alphabetically by default. Click the Search icon to enter the contact search interface. Any numbers or letters associated with any of the contacts saved in the list will be shown in the search results.
Wireless networks BT is a short-range wireless communications technology that devices can use to exchange information and connect to different types of devices which include headsets and other devices. Power on BT Settings » Connected devices and select to power on BT. The BT icon will appear in the notification bar. The BT will then start to scan for all devices within its range and will display all available devices in a list. In BT settings, all the devices found will displayed in a list.
Camera Prior to use: Insert memory card before using the camera or video camera. All photos or videos taken by the phone are typically stored in the memory card for large storage capacity of images and videos. Open Camera Click the Applications Menu » Camera Switch to video mode if you want to record videos. Note: You may place a camera shortcut icon on any of the screens Take Pictures Aim the object that the picture will be taken. Press the Shutter button on the screen to capture image.
Share Pictures You may share pictures by sending them through different types of installed applications. You may also send pictures through the MMS message function by attaching a picture and also via BT. Adjust Image Press Menu and select edit to adjust images. You may select from different effects that may include: Vintage, Black and White, Instant, Latte, Litho, X-Process, Crop, Rotate, Mirror, Straighten, Vignette, Contrast, Exposure, Auto color, Shadows, and Vibrancy.
FM Radio as Background Click on the Home key to move the FM Radio to the background. Sound Recorder You may send any recorded audio via BT or MMS and also have the option to make any recorded audio the phones default ring tone. The recorder uses AMR, 3GPP and OGG format. Record Keep the phone’s microphone near the sound source. Click the record button to record the audio. Click the stop button to stop recording the audio. Note: All recordings are typically saved in the memory card folder.
Settings » Wi-Fi to power on. When on, the Wi-Fi will automatically search for available networks. Any unsecured network can be used directly and any secured network requires a password or credentials prior to connection. Data Usage. Mobile and Wi-Fi Data Usage More Wireless & Networks. Tethering, Portable Hotspot, VPN, APN, Airplane Mode. Note: When in flight mode, all network connections will turn off automatically. BT Power on BT. Once on, BT will automatically scan for any nearby open devices.
Battery General power usage Apps & notifications Manage applications - Manage and delete installed applications Running Applications- Press the ‘Force Stop’ button to stop any of the applications listed and removes from the running apps list. Personal Security & location Device security Set up basic screen locks: Use slide, pattern, PIN or password to lock the screen. Pattern: The first time there will be simple unlock instructions and examples.
screen. The phone will automatically prompt you enter the old PIN code and ask to enter a new PIN code twice. The phone will then prompt you that the change was successful. If you enter the PIN incorrectly three Times, the SIM and PIN codes will be automatically locked. You will need the PUK code to unlock the phone which is available through your service provider. If you enter the PUK code incorrectly 10 times, the SIM card will be permanently locked.
Backup Data – Will back up all application data, WLAN passwords, and other settings to Google's servers Restore to Factory Settings - Clear all data stored System Date & Time Date and Time adjustment.
The developer option gives access to USB Debugging and other developer options About Device Phone information status and firmware updates Storage Connect the phone with the USB cable provided. Once connected, a connection interface will appear. In the connection mode interface, select one of the available options to transfer files to your computer. Troubleshooting Below is a list of common problems that may occur when using your mobile phone.
The phone powers off by itself Check if the screen lock of the phone is enabled. Check if the phone needs to be charged. The battery won’t charge Check if the battery is already fully charged. Make sure that the battery is inserted correctly. Ensure that the battery being used is a WOLKI approved battery. Double check if the charger connector is properly connected to the phone. Note: Connect charger only after the battery has been inserted.
The PIN code was entered incorrectly three times The SIM card will lock and you will need to enter the PUK code (PIN Unlock Code). Please contact your local service provider to obtain the PUK. I cannot make calls Make sure that the number you dialed is correct and the dial key has been pressed. Use the full national area code when dialing out of your area or when abroad, use country-specific international access codes. I cannot receive calls Make sure that your phone is connected to a network.
Ensure text messaging is enabled with your service provider. Ensure APN settings are configured (Carrier dependent). The information provided in this user manual is subject to change without notice and WOLKI Products reserves the right to modify the manual at any given time. WOLKI Products has made every effort to ensure that this user manual is accurate and disclaims responsibility and liability for any inaccuracies or omissions.
Communications However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: —Reorient or relocate the receiving antenna. —Increase the separation between the equipment and receiver.
Información de seguridad Gracias por usar WOLKI WS041,Por favor, lea cuidadosamente los términos siguientes: Utilizar de forma segura No utilice el teléfono en situaciones en las que podría constituir un peligro. Seguridad en el transporte Tenga en cuenta todas las leyes y regulaciones de transporte. Por favor conducir con ambas manos en el volante. POR FAVOR Conduzca con precaución - No utilice el teléfono al manejar. Seguridad Hospitalaria Por favor, siga las reglas del hospital y limitaciones.
Advertencia de temperatura No exponga su teléfono a condiciones extremas de temperatura. Evite contacto con el agua Su teléfono no es resistente al agua. Mantenga el teléfono lejos del agua o líquido para evitar daños. Llamadas de emergencia Asegúrese de que su teléfono móvil está encendido y en un área de servicio. En la pantalla de inicio, pulse la tecla del teléfono y marcar el número de emergencia. Accesorios y baterías Utilice sólo baterías y accesorios WOLKI autorizados.
- Guarde la batería en un lugar fresco y seco lejos de la luz directa del sol y el agua. - No exponga las baterías a temperaturas extremas (por debajo de -8 ° C (18 ° F) o por encima de 43 ° C (110 ° F). - Deje inmediatamente de utilizar la batería si produce un olor, grietas y fugas, se recalienta, distorsiona o tiene cualquier otro tipo de daño físico. - Evitar el uso del cargador de cerca o alrededor de líquidos.
Introducción Instalación de la tarjeta SIM Advertencia: Mantenga la tarjeta SIM fuera del alcance de los niños. La tarjeta SIM y sus contactos pueden dañarse fácilmente debido si se raspa o se dobla. Por favor tenga cuidado al llevar, instalar o sacar la tarjeta SIM. Nota: Por favor, póngase en contacto con su proveedor de servicio de telefonía celular directamente para obtener su tarjeta SIM. Para insertar la tarjeta SIM: 1. Retire la tapa posterior. Inserte la tarjeta SIM. 2.
Funciones de las llamadas En el teclado de marcación, introduzca el número de teléfono y haga clic en la tecla de marcación. Si marcar una extensión, puede hacer clic en el icono de teclado de marcación en la parte inferior de la pantalla para abrir la interfaz e introduzca el número de la extensión. También puede mantener pulsada la tecla 0 para añadir un signo (+) al añadir un prefijo de marcación internacional.
directo para encender o apagar. Nota: Para borrar las notificaciones, arrastre hacia abajo la barra de notificación y haga clic en el icono de notificación transparente en la parte superior derecha de la pantalla (3 líneas horizontales). El menú de configuración de notificaciones se encuentra arrastrando hacia abajo la barra de notificaciones y se encuentra en la parte superior derecha de la pantalla al lado del icono de notificación clara.
BT es una tecnología de comunicación inalámbrica de corto alcance que los dispositivos se pueden utilizar para intercambiar información y conectarse a diferentes tipos de dispositivos que incluyen auriculares y otros dispositivos. Encender BT Ajustes »Dispositivos conectados y seleccione para encender el BT. El icono de BT aparecerá en la barra de notificaciones. El BT entonces empezará a buscar todos los dispositivos dentro de su rango y mostrará todos los dispositivos disponibles en una lista.
fotos o videos tomados con el teléfono normalmente se almacenan en la tarjeta . Cámara abierta Haga clic en el menú Aplicaciones de la cámara » Cambiar al modo de vídeo si desea grabar vídeos. Nota: Es posible colocar un icono de acceso directo de la cámara en cualquiera de las pantallas Tomar fotografías Apunta el objeto de que la fotografía debe tomarse. Presione el botón del obturador en la pantalla para capturar la imagen.
También puede enviar imágenes a través de la función de mensajes MMS adjuntando una imagen y también a través de BT. Ajustar imagen Pulse Menú y seleccione Editar para ajustar las imágenes. Es posible seleccionar entre diferentes efectos que pueden incluir: Vintage, Blanco y Negro, instantáneo, Latte, Litho, X-Proceso, recortar, rotar, espejo, se endereza, Viñeta, contraste, exposición, color automático, sombras, y la vitalidad. Editar Fotos Haga clic en el menú para ajustar el tamaño de la imagen.
Grabador de sonido Usted puede enviar cualquier audio grabado a través de BT o MMS y también tienen la opción de hacer cualquier sonido del tono de llamada predeterminado teléfonos registrados. La grabadora utiliza el formato AMR, 3GPP y OGG. Grabar Mantenga el micrófono del teléfono cerca de la fuente de sonido. Haga clic en el botón de grabación para grabar el audio. Haga clic en el botón de parada para detener la grabación del audio.
Uso de datos. El uso del móvil y Wi-Fi de Datos Más Conexiones inalámbricas y redes. Tethering, zona Wi-Fi, VPN, la APN, el modo de avión. Nota: Cuando está en modo de vuelo, todas las conexiones de red se apagará automáticamente. BT Encender BT. Una vez encendido, buscará automáticamente los dispositivos abiertos cercanos. Haga clic para conectar el dispositivo.
Aplicaciones y notificaciones Administrar aplicaciones - Gestionar y eliminar aplicaciones instaladas Ejecución de Aplicaciones-Pulse el botón 'Forzar detención' para detener cualquiera de las aplicaciones de la lista y elimina de la lista de aplicaciones en ejecución. Personal Seguridad y ubicación seguridad del dispositivo Configurar bloqueo de pantalla básica: El uso de diapositivas, patrón, PIN o contraseña para bloquear la pantalla.
bloqueará automáticamente. Necesitará el código PUK para desbloquear el teléfono que está disponible a través de su proveedor de servicios. Si introduce el código PUK incorrecto 10 veces, la tarjeta SIM se bloqueará de forma permanente.
Restaurar la configuración de fábrica - Borrar todos los datos almacenados Sistema Fecha y hora Fecha y Hora de ajuste.
Acerca del dispositivo información sobre el estado del teléfono y actualizaciones de firmware Almacenamiento Conectar el teléfono con el cable USB proporcionado. Una vez conectado, aparecerá una interfaz de conexión. En la interfaz de modo de conexión, seleccione una de las opciones disponibles para transferir archivos a un ordenador. Solución de problemas A continuación se muestra una lista de los problemas comunes que pueden ocurrir al utilizar su teléfono móvil.
Retire e inserte la batería - Si el teléfono tiene una batería interna, por favor, pulse y mantenga pulsado el botón de encendido. El teléfono se apaga por sí mismo Compruebe si está activado el bloqueo de la pantalla del teléfono. Comprobar si las necesidades de teléfono que se cargará. La batería no se cargará Compruebe si la batería ya está totalmente cargada. Asegúrese de que la batería se ha insertado correctamente.
El teléfono muestra un error de SIM Asegúrese de que la tarjeta SIM está insertada correctamente y en su ranura prevista. Asegúrese de que la tarjeta SIM no está dañado o rayado. El código PIN se ha introducido de forma incorrecta tres veces La tarjeta SIM se bloqueará y tendrá que introducir el código PUK (código de desbloqueo de PIN). Por favor, póngase en contacto con su proveedor de servicios para obtener el código PUK.
El teléfono no se conecta a internet Garantizar con su proveedor de servicios que su cuenta tiene el plan de internet / datos apropiado habilitado. garantizar la configuración de APN de Internet están configurados (depende del operador). Los mensajes de texto no pueden ser enviados / recibidos Asegurar la mensajería de texto está habilitado con su proveedor de servicios. Asegurar la configuración de APN se configuran (depende del operador).
Advertencia de la FCC: Cualquier cambio o modificación no aprobados expresamente por la parte responsable del cumplimiento podrían anular la autoridad del usuario para operar el equipo. Este dispositivo cumple con la parte 15 de las normas de la FCC.
Tasa de absorción específica (SAR) Las pruebas de SAR se realizan en posiciones de funcionamiento estándar aceptadas por la FCC con el teléfono transmitiendo a su nivel de potencia certificado en todas las bandas de frecuencia probadas.