User Guide

Please read me before installation
Dear customer,
many thanks for choose WOLFBOX G840S mirror Dash Cam,
here a few tips before installation.
A. Warm Tips:
1.Important！Please use the original power cable provided in
package, do not use other power cables. Other power cable may
make the camera mirror unstable even damaged.
2. Do not use Socket distributor.
3. Please tear off the films on the screen and lens before using.
4. The original cable for rear camera is 20ft (fit most cars and
trucks), if the cable is not long enough for your car, please contact
us for a longer cable, or just search B082RZNJFY (33 feet) or
B0814ZHHST (50 feet) on Amazon for your convenience.
5. If you want to play the GPS track on your computer, please
Download Player on links below:
GVPlayer for mac: https://bit.ly/2QsCI6K
GVPlayer for win: https://bit.ly/2QsxVC1
6. Although we offer brackets for rear camera to install inside car,
we don’t suggest to install in car. Because the windshield glass
and film will decrease the color saturation and sharpness of the
video.
B. About Parking Monitor:
Mode One---Collision boot recording: After the car engine is
off, the camera will turn off automatically. Set the parking monitor-
ing on menu among high, middle or low, the mirror camera will
start recording automatically when there’s collision or vibration in
parking mode. This mode functions with built-in battery on the
camera. When the battery is run off, it will not work until the car
engine is turn on again.
Mode Two---Time lapse recording: After installation of dedicated
hardwire kit and connected, you can find “lapse-recoding” on set-
ting menu, turn the switch on, and set lapse time between 12hour
or 24hour, set lapse fps among 1fps / 2fps or 5 fps. The camera
will record 1/2/5 fps per second, it’s extremely saving power and
capacity. With battery drain protection, you don’t need worry about
drain out car battery.
Dedicated hardwire kit buying link:
https://www.amazon.co.uk/dp/B08FDLRPN8 (or just search B08F-
DLRPN8 on Amazon).