UMC-STD31BPN Product Specification 4 □文件新增 Addition of Document Subject: UMC-STD31BPN Product Specification ■文件變更 Alteration of Document Doc. No.: □文件作廢 Revocation of Document Rev: 0.6 Page 1 of 55 UMC-STD31BPN Product Specification ALL RIGHTS RESERVED This is an unpublished work. No part of this document may be copied, photocopied, reproduced, translated, or reduced to any electronic or machine-readable form without the prior permission of Wistron NeWeb Corps.
UMC-STD31BPN Product Specification 4 □文件新增 Addition of Document Subject: UMC-STD31BPN Product Specification ■文件變更 Alteration of Document Doc. No.: Revision Revision Date Revised By 0.6 2022/2/15 Roy □文件作廢 Revocation of Document Rev: 0.6 Page 2 of 55 Description Page 3, Update band plan for variants. Page 6, Update current consumption. Page 30, Revise label information for C sample.
UMC-STD31BPN Product Specification 4 □文件新增 Addition of Document Subject: UMC-STD31BPN Product Specification ■文件變更 Alteration of Document Doc. No.: □文件作廢 Revocation of Document Rev: 0.6 Page 3 of 55 1 General features ............................................................................................................................................. 5 1.1 Regional variant ...............................................................................................................................
UMC-STD31BPN Product Specification 4 □文件新增 Addition of Document Subject: UMC-STD31BPN Product Specification ■文件變更 Alteration of Document Doc. No.: □文件作廢 Revocation of Document Rev: 0.6 Page 4 of 55 8.2.1 Power ON ........................................................................................................................................ 42 8.2.2 Power OFF .......................................................................................................................................
UMC-STD31BPN Product Specification 4 □文件新增 Addition of Document Subject: UMC-STD31BPN Product Specification ■文件變更 Alteration of Document Doc. No.: □文件作廢 Revocation of Document Rev: 0.6 Page 5 of 55 1 General features UMC-STD31BP is the 254-pin contacting LGA type NAD(Network Access Device) suitable for automotive applications based on its LTE/WCDMA/GSM communication features.
UMC-STD31BPN Product Specification 4 □文件新增 Addition of Document Subject: UMC-STD31BPN Product Specification ■文件變更 Alteration of Document Doc. No.: □文件作廢 Revocation of Document Rev: 0.6 Page 6 of 55 1.3 Interface 1.3.1 Signal interface UMC-STD31BP has signal interfaces as showed as below table. Developer could use these interfaces to communicate with NAD or debugging Interface PCIE USB 2.
UMC-STD31BPN Product Specification 4 □文件新增 Addition of Document Subject: UMC-STD31BPN Product Specification ■文件變更 Alteration of Document Doc. No.: □文件作廢 Revocation of Document Rev: 0.6 Page 7 of 55 1.3.5 Power output interface Interface VEMC_PMU VIO33_PMU VCN33_PMU VIO18_PMU VCN18_PMU VSIM1_PMU VSIM2_PMU Description 1 pin. 3.0V output, max current 800mA. For eMMC 1 pin. 3.3V output, max current 100mA. For I/O or sensors 1 pin. 3.3V output, max current 70mA. For Connectivity 1 pin. 1.
UMC-STD31BPN Product Specification 4 □文件新增 Addition of Document Subject: UMC-STD31BPN Product Specification ■文件變更 Alteration of Document Doc. No.: □文件作廢 Revocation of Document Rev: 0.6 Page 8 of 55 2 Block diagram 2.1 UMC-STD31BP block diagram 本資料為啟碁科技股份有限公司專有之財產,非經書面許可,不准透露或使用本資料,亦不准複印,複製或轉變成其他形式使用。 The information contained herein is the exclusive property of WNC and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission from WNC. Form No.
UMC-STD31BPN Product Specification 4 □文件新增 Addition of Document Subject: UMC-STD31BPN Product Specification ■文件變更 Alteration of Document Doc. No.: □文件作廢 Revocation of Document Rev: 0.6 Page 9 of 55 2.2 Software stack Figure shows the software stack on MTK/MT2731 platform working on LINUX operation system which Kernel version is 4.14.
UMC-STD31BPN Product Specification 4 □文件新增 Addition of Document Subject: UMC-STD31BPN Product Specification ■文件變更 Alteration of Document Doc. No.: □文件作廢 Revocation of Document Rev: 0.6 Page 10 of 55 3.2 Bottom side (Top to Bottom View)Round pads of LGA contacting 3.
UMC-STD31BPN Product Specification 4 □文件新增 Addition of Document Subject: UMC-STD31BPN Product Specification 1 A 2 3 GPIO46_1 V8 GND 4 5 ■文件變更 Alteration of Document Doc. No.: 6 7 SS_USB_ SS_USB_ SS_USB_ SS_USB_ TXP TXN RXN RXP 8 GND 9 10 11 □文件作廢 Revocation of Document Rev: 0.
UMC-STD31BPN Product Specification 4 □文件新增 Addition of Document Subject: UMC-STD31BPN Product Specification ■文件變更 Alteration of Document Doc. No.: □文件作廢 Revocation of Document Rev: 0.6 Page 12 of 55 3.
UMC-STD31BPN Product Specification 4 □文件新增 Addition of Document Subject: UMC-STD31BPN Product Specification ■文件變更 Alteration of Document Doc. No.: □文件作廢 Revocation of Document Rev: 0.6 Page 13 of 55 ID pin of USB 2.0 OTG interface A12 IDDIG DVDD18 1.8V PD P26 GPIO25 A13 GPIO24_1V8 DVDD18 1.8V PD N26 GPIO24 GO1 A14 GND n/a A15 GPIO13_3V3 DVDD28 3.3V PD AA24 GPIO13 GO2 A16 GPIO1_1V8 DVDD18 1.8V PD M26 GPIO1 A17 GPIO15_3V3 DVDD28 3.
UMC-STD31BPN Product Specification 4 □文件新增 Addition of Document Subject: UMC-STD31BPN Product Specification ■文件變更 Alteration of Document Doc. No.: □文件作廢 Revocation of Document Rev: 0.6 Page 14 of 55 B13 GPIO49_3V3 DVDD28 3.3V PD AA22 GPIO49 GO7 B14 GPIO47_3V3 DVDD28 3.3V PD AA23 GPIO47 GO8 B15 GPIO14_3V3 DVDD28 3.3V PD AB25 GPIO14 GO9 B16 GND B17 GND n/a n/a C1 MSDC0_DAT7 DVDD18 1.8V PU J2 GPIO136 8-bits SDIO for eMMC C2 MSDC0_CLK DVDD18 1.
UMC-STD31BPN Product Specification 4 □文件新增 Addition of Document Subject: UMC-STD31BPN Product Specification ■文件變更 Alteration of Document Doc. No.: □文件作廢 Revocation of Document Rev: 0.6 Page 15 of 55 D1 MSDC0_DAT5 DVDD18 1.8V PU F2 GPIO135 8-bits SDIO for eMMC D2 MSDC0_CMD DVDD18 1.8V PU H5 GPIO142 8-bits SDIO for eMMC D3 UTXD0(Debug) DVDD18 1.8V PU L24 GPIO17 UART interface signal D4 URXD0(Debug) DVDD18 1.8V PU L23 GPIO16 UART interface signal D5 GPIO32_1V8 DVDD18 1.
UMC-STD31BPN Product Specification 4 □文件新增 Addition of Document Subject: UMC-STD31BPN Product Specification ■文件變更 Alteration of Document Doc. No.: □文件作廢 Revocation of Document Rev: 0.6 Page 16 of 55 E7 GPIO26_1V8 DVDD18 1.8V PD T21 GPIO26 GO34 E8 GPIO59_1V8 DVDD18 1.8V PD AD20 GPIO59 GO35 E9 GPIO63_1V8 DVDD18 1.8V PD AD19 GPIO63 GO36 E10 GND E11 GPIO42_3V3 E12 E13 E14 E15 n/a DVDD28 3.3V PU GND GND GND GND W21 GPIO42 GO28 n/a n/a n/a n/a E16 META_MODE DVDD18 1.
UMC-STD31BPN Product Specification 4 □文件新增 Addition of Document Subject: UMC-STD31BPN Product Specification ■文件變更 Alteration of Document Doc. No.: □文件作廢 Revocation of Document Rev: 0.6 Page 17 of 55 F11 LTE_COEX_TX_1V8 DVDD18 1.8V PD V23 GPIO56 Reserved interface for IDC connection of WLAN IC F12 LTE_COEX_RX_1V8 DVDD18 1.8V PD V22 GPIO57 Reserved interface for IDC connection of WLAN IC F13 GND F14 GND F15 GND n/a n/a n/a F16 GPIO6_3V3 DVDD28 3.
UMC-STD31BPN Product Specification 4 □文件新增 Addition of Document Subject: UMC-STD31BPN Product Specification ■文件變更 Alteration of Document Doc. No.: □文件作廢 Revocation of Document Rev: 0.6 Page 18 of 55 G17 GPIO4_3V3 DVDD28 3.3V PD AD26 GPIO4 H1 GBE_TXD0 DVDD28 3.3V PD N5 GPIO119 GbE H2 GBE_TXD2 DVDD28 3.3V PD M4 GPIO117 GbE H3 GBE_TXC DVDD28 3.3V PD L4 GPIO124 GbE H4 GBE_MDIO DVDD28 3.3V PD L3 GPIO129 GbE H5 GBE_TXER DVDD28 3.3V PD M2 GPIO130 GbE H6 GND GO46 n/a 0 to 1.
UMC-STD31BPN Product Specification 4 □文件新增 Addition of Document Subject: UMC-STD31BPN Product Specification ■文件變更 Alteration of Document Doc. No.: □文件作廢 Revocation of Document Rev: 0.6 Page 19 of 55 J8 GND J9 GPIO88_1V8 DVDD18 1.8V PD AB5 GPIO88 GO50 J10 GPIO87_1V8 DVDD18 1.8V PD AB6 GPIO87 GO49 J11 J12 J13 J14 J15 J16 J17 n/a GND GND GND GND GND GND GND n/a n/a n/a n/a n/a n/a n/a K1 VEMC_PMU K2 K3 GND GND K4 GBE_RXD1 DVDD28 3.3V PD P2 GPIO122 GbE K5 GBE_RXDV DVDD28 3.
UMC-STD31BPN Product Specification 4 □文件新增 Addition of Document Subject: UMC-STD31BPN Product Specification ■文件變更 Alteration of Document Doc. No.: K17 GND L1 GND □文件作廢 Revocation of Document Rev: 0.6 Page 20 of 55 n/a n/a L2 VIO33_PMU 3.3V PMIC 3.3-Voltage output source; the maximum supply current is 100-mA L3 VSIM1_PMU 1.8V PMIC 1.8-Volatge source of SIM1; the maximum supply current is 140-mA PMIC PMIC input pin for USB detection.
UMC-STD31BPN Product Specification 4 □文件新增 Addition of Document Subject: UMC-STD31BPN Product Specification M1 VCN33_PMU ■文件變更 Alteration of Document Doc. No.: 3.3V □文件作廢 Revocation of Document Rev: 0.6 Page 21 of 55 PMIC 3.3-Voltage output source reserved for MT6630; the maximum supply current is 70-mA M2 VSIM2_PMU 1.8V PMIC 1.8-Volatge source of SIM2; the maximum supply current is 140-mA M3 VRTC28 2.8V PMIC 2.
UMC-STD31BPN Product Specification 4 □文件新增 Addition of Document Subject: UMC-STD31BPN Product Specification N1 VIO18_PMU 1.8V -1.5 to 1.5V N2 AUDIO_IN2_P N3 N4 N5 N6 ■文件變更 Alteration of Document Doc. No.: GND GND GND GND N7 SRCLKENA0 DVDD18 1.
UMC-STD31BPN Product Specification 4 □文件新增 Addition of Document Subject: UMC-STD31BPN Product Specification ■文件變更 Alteration of Document Doc. No.: AUDIO_IN2_N -1.5 to 1.5V AUDIO_OUT2_N -1.98V to 1.98V P4 AUDIO_OUT2_P -1.98V to 1.98V P5 GND P6 PMIC_ENB P2 P3 □文件作廢 Revocation of Document Rev: 0.
UMC-STD31BPN Product Specification 4 □文件新增 Addition of Document Subject: UMC-STD31BPN Product Specification ■文件變更 Alteration of Document Doc. No.: Q1 AUDIO_IN1_P -1.5 to 1.5V Q2 AUDIO_OUT1_N -1.98V to 1.98V Q3 AUDIO_OUT1_P -1.98V to 1.98V Q4 VCN18_PMU 1.8V Q5 GND □文件作廢 Revocation of Document Rev: 0.
UMC-STD31BPN Product Specification 4 □文件新增 Addition of Document Subject: UMC-STD31BPN Product Specification ■文件變更 Alteration of Document Doc. No.: □文件作廢 Revocation of Document Rev: 0.6 Page 25 of 55 Q15 AUXADC_VIN6 0 to 1.98V PMIC PMIC ADC input with 12-bit A-to-D resolution Q16 AUXADC_VIN8 0 to 1.98V PMIC PMIC ADC input with 12-bit A-to-D resolution Q17 GND n/a 3.5 GPIO table 3.5.
UMC-STD31BPN Product Specification 4 □文件新增 Addition of Document Subject: UMC-STD31BPN Product Specification ■文件變更 Alteration of Document Doc. No.: □文件作廢 Revocation of Document Rev: 0.6 Page 26 of 55 GO12 B:GPIO38 EINT38 DVDD28_IOAUD 3.3V W23 B0:PCM1_SYNC/B1:SCL1/I1:URXD4/O:SPI2_A_CS 2C GO13 B:GPIO48 EINT48 DVDD28_IOTCU 3.3V AC23 I1:URXD2/I0:SPI0_A_MI GO14 B:GPIO50 EINT50 DVDD28_IOTCU 3.3V AB22 O:UTXD2/O:SPI0_A_MO GO15 B:GPIO7 EINT7 DVDD28_IOTCU 3.
UMC-STD31BPN Product Specification 4 □文件新增 Addition of Document Subject: UMC-STD31BPN Product Specification ■文件變更 Alteration of Document Doc. No.: □文件作廢 Revocation of Document Rev: 0.6 Page 27 of 55 GO31 B:GPIO19 EINT19 DVDD18_IOLM 1.8V M23 GPIO19_1V8/O:UTXD1/I1:URXD3 GO32 B:GPIO35 EINT35 DVDD18_IOLB 1.8V U25 B1:MSDC2_DAT1/I0:I2S0_DI GO33 B:GPIO27 EINT27 DVDD18_IOLM 1.8V T22 I1:URXD6 GO34 B:GPIO26 EINT26 DVDD18_IOLM 1.8V T21 O:UTXD6 GO35 B:GPIO59 EINT59 DVDD18_IOBL 1.
UMC-STD31BPN Product Specification 4 □文件新增 Addition of Document Subject: UMC-STD31BPN Product Specification ■文件變更 Alteration of Document Doc. No.: □文件作廢 Revocation of Document Rev: 0.6 Page 28 of 55 GO51 B:GPIO89 EINT89 DVDD18_IOBR 1.8V AF4 GPIO89_1V8/O:PWM0/O:I2S5_MCK/B1:SDA1/O: UTXD2 GO52 B:GPIO93 EINT93 DVDD18_IORB 1.8V AE3 O:UTXD1/O:SPI1_B_CS1A GO53 B:GPIO94 EINT94 DVDD18_IORB 1.8V AF2 I1:URXD1/O:SPI1_B_CLK GO54 B:GPIO95 EINT95 DVDD18_IORB 1.
UMC-STD31BPN Product Specification 4 □文件新增 Addition of Document Subject: UMC-STD31BPN Product Specification ■文件變更 Alteration of Document Doc. No.: □文件作廢 Revocation of Document Rev: 0.6 Page 29 of 55 GO16 B:GPIO22 EINT22 DVDD18_IOLM 1.8V N25 Wake up GO17 GO18 B:GPIO31 B:GPIO36 EINT31 EINT36 DVDD18_IOLB 1.8V DVDD18_IOLB 1.8V R25 U24 Wake up Wake up GO19 GO20 GO21 B:GPIO33 B:GPIO30 B:GPIO41 EINT33 EINT30 EINT41 DVDD18_IOLB 1.8V DVDD18_IOLM 1.8V DVDD28_IOAUD 3.
UMC-STD31BPN Product Specification 4 □文件新增 Addition of Document Subject: UMC-STD31BPN Product Specification ■文件變更 Alteration of Document Doc. No.: □文件作廢 Revocation of Document Rev: 0.6 Page 30 of 55 GO44 B:GPIO10 EINT10 DVDD18_IORB 1.8V AC4 Wake up/ Hardware Debounce GO45 B:GPIO2 EINT2 DVDD18_IOLB 1.8V V21 Wake up/ Hardware Debounce GO46 B:GPIO4 EINT4 DVDD28_IOTCU 3.3V AD26 Wake up/ Hardware Debounce GO47 B:GPIO90 EINT90 DVDD18_IOBR 1.
UMC-STD31BPN Product Specification 4 □文件新增 Addition of Document Subject: UMC-STD31BPN Product Specification ■文件變更 Alteration of Document Doc. No.: □文件作廢 Revocation of Document Rev: 0.6 Page 31 of 55 4 Mechanical design 4.1 Shielding case design 本資料為啟碁科技股份有限公司專有之財產,非經書面許可,不准透露或使用本資料,亦不准複印,複製或轉變成其他形式使用。 The information contained herein is the exclusive property of WNC and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission from WNC. Form No.
UMC-STD31BPN Product Specification 4 □文件新增 Addition of Document Subject: UMC-STD31BPN Product Specification ■文件變更 Alteration of Document Doc. No.: □文件作廢 Revocation of Document Rev: 0.6 Page 32 of 55 4.2 Label information 4.3 NAD land pattern 1.36-MM is the original NAD bottom side copper pad diameter size. It implemented the solder mask to cover these LGA pads; thus, SMD(Solder Mask Define) round pad diameter is 1.
UMC-STD31BPN Product Specification 4 □文件新增 Addition of Document Subject: UMC-STD31BPN Product Specification ■文件變更 Alteration of Document Doc. No.: □文件作廢 Revocation of Document Rev: 0.6 Page 33 of 55 4.
UMC-STD31BPN Product Specification 4 □文件新增 Addition of Document Subject: UMC-STD31BPN Product Specification ■文件變更 Alteration of Document Doc. No.: □文件作廢 Revocation of Document Rev: 0.6 Page 34 of 55 4.
UMC-STD31BPN Product Specification 4 □文件新增 Addition of Document Subject: UMC-STD31BPN Product Specification ■文件變更 Alteration of Document Doc. No.: □文件作廢 Revocation of Document Rev: 0.6 Page 35 of 55 4.6 Moisture sensitivity level UMC-MT2731R complies IPC/JEDEC J-STD-020 Standard MSL 3 4.
UMC-STD31BPN Product Specification 4 □文件新增 Addition of Document Subject: UMC-STD31BPN Product Specification ■文件變更 Alteration of Document Doc. No.: □文件作廢 Revocation of Document Rev: 0.6 Page 36 of 55 本資料為啟碁科技股份有限公司專有之財產,非經書面許可,不准透露或使用本資料,亦不准複印,複製或轉變成其他形式使用。 The information contained herein is the exclusive property of WNC and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission from WNC. Form No.
UMC-STD31BPN Product Specification 4 □文件新增 Addition of Document Subject: UMC-STD31BPN Product Specification ■文件變更 Alteration of Document Doc. No.: □文件作廢 Revocation of Document Rev: 0.6 Page 37 of 55 5 Thermal design 5.1 Thermal sensor (1)There are four temperature sensors embedded in MT2731 device package. Developer could read temperature value inside MT2731 by the software command.
UMC-STD31BPN Product Specification 4 □文件新增 Addition of Document Subject: UMC-STD31BPN Product Specification ■文件變更 Alteration of Document Doc. No.: □文件作廢 Revocation of Document Rev: 0.6 Page 38 of 55 (3)Developer could connect four outgoing general purpose ADC interfaces, named as AUXADC_VIN2, AUXADC_VIN4, AUXADC_VIN6 and AUXADC_VIN8, of NAD for monitoring hotspots’ temperature on the application board 5.2 Software thermal mitigation UMC-MT2731R has software approaches for the thermal mitigation.
UMC-STD31BPN Product Specification 4 □文件新增 Addition of Document Subject: UMC-STD31BPN Product Specification ■文件變更 Alteration of Document Doc. No.: □文件作廢 Revocation of Document Rev: 0.6 Page 39 of 55 6 RF specification 6.1 UMC-MT2731R 6.1.
UMC-STD31BPN Product Specification 4 □文件新增 Addition of Document Subject: UMC-STD31BPN Product Specification ■文件變更 Alteration of Document Doc. No.: □文件作廢 Revocation of Document Rev: 0.6 Page 40 of 55 6.1.
UMC-STD31BPN Product Specification 4 □文件新增 Addition of Document Subject: UMC-STD31BPN Product Specification ■文件變更 Alteration of Document Doc. No.: □文件作廢 Revocation of Document Rev: 0.6 Page 41 of 55 本資料為啟碁科技股份有限公司專有之財產,非經書面許可,不准透露或使用本資料,亦不准複印,複製或轉變成其他形式使用。 The information contained herein is the exclusive property of WNC and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission from WNC. Form No.
UMC-STD31BPN Product Specification 4 □文件新增 Addition of Document Subject: UMC-STD31BPN Product Specification ■文件變更 Alteration of Document Doc. No.: □文件作廢 Revocation of Document Rev: 0.6 Page 42 of 55 8 Design application notes This section describes how to connect UMC-MT2731R NAD to the circuitry on the application board, and notes that system developers should pay attention to in their design stage 8.
UMC-STD31BPN Product Specification 4 □文件新增 Addition of Document Subject: UMC-STD31BPN Product Specification Q6/Q7 P6 P7 VSYS PMIC_ENB PMIC_RESET_B H7 SYSRSTB ■文件變更 Alteration of Document Doc. No.: □文件作廢 Revocation of Document Rev: 0.6 Page 43 of 55 System supply-feed power of NAD Pull this pin low to power NAD on Pull this pin low to trigger the reset of PMIC Pull this pin low to reset NAD without resetting the power ON/OFF sequence of PMIC 8.3 USB2.0 WNC enable only 1 USB2.
UMC-STD31BPN Product Specification 4 □文件新增 Addition of Document Subject: UMC-STD31BPN Product Specification H3 H1 J1 H2 J3 H5 J2 L5 J6 K4 K6 L6 K7 K5 G5 J5 J4 H4 GBE_TXC GBE_TXD0 GBE_TXD1 GBE_TXD2 GBE_TXD3 EINT130 (GBE_TXER) TX_CTL (GBE_TXEN) GBE_RXC GBE_RXD0 GBE_RXD1 GBE_RXD2 GBE_RXD3 EINT131 (GBE_RXER) RX_CTL (GBE_RXDV) EINT132 (GBE_COL) GBE_INTR GBE_MDC GBE_MDIO ■文件變更 Alteration of Document Doc. No.
UMC-STD31BPN Product Specification 4 □文件新增 Addition of Document Subject: UMC-STD31BPN Product Specification ■文件變更 Alteration of Document Doc. No.: □文件作廢 Revocation of Document Rev: 0.6 Page 45 of 55 Preventing the coplanar grounding being quite close 50-OHM RF transmission lines shall be considered by Developer when you do RF trace design connected to RF antenna pads of UMC-MT2731R on the application board.
UMC-STD31BPN Product Specification 4 □文件新增 Addition of Document Subject: UMC-STD31BPN Product Specification ■文件變更 Alteration of Document Doc. No.: □文件作廢 Revocation of Document Rev: 0.6 Page 46 of 55 8.10 KPCOL0 Pull KPCOL0 LOW to force NAD being USB Download Mode for user updating NAD software 8.11 IDDIG This pin is used as USB 2.0 OTG ID pin 8.12 WATCHDOG WATCHDOG is a 1.8V level signal generated from MT2731 and then received by PMIC.
UMC-STD31BPN Product Specification 4 □文件新增 Addition of Document Subject: UMC-STD31BPN Product Specification ■文件變更 Alteration of Document Doc. No.: □文件作廢 Revocation of Document Rev: 0.6 Page 47 of 55 8.13 SRCLKENA0 NAD status indicator generated from MT2731; the state of high(1.8V) for Normal Mode, as well as low(0Voltage) for Sleep/Low Power Mode 8.14 RTC_CLK 32.768-KHz clock signal generated from PMIC is able to be the synchronized signal source for other functional blocks on the application board 8.
UMC-STD31BPN Product Specification 4 □文件新增 Addition of Document Subject: UMC-STD31BPN Product Specification ■文件變更 Alteration of Document Doc. No.: □文件作廢 Revocation of Document Rev: 0.
UMC-STD31BPN Product Specification 4 □文件新增 Addition of Document Subject: UMC-STD31BPN Product Specification ■文件變更 Alteration of Document Doc. No.: □文件作廢 Revocation of Document Rev: 0.
UMC-STD31BPN Product Specification 4 □文件新增 Addition of Document Subject: UMC-STD31BPN Product Specification ■文件變更 Alteration of Document Doc. No.: □文件作廢 Revocation of Document Rev: 0.
UMC-STD31BPN Product Specification 4 □文件新增 Addition of Document Subject: UMC-STD31BPN Product Specification ■文件變更 Alteration of Document Doc. No.: □文件作廢 Revocation of Document Rev: 0.6 Page 51 of 55 10. Warning statement Federal Communication Commission Interference Statement: This device complies with Part 15 of the FCC Rules.
UMC-STD31BPN Product Specification 4 □文件新增 Addition of Document Subject: UMC-STD31BPN Product Specification ■文件變更 Alteration of Document Doc. No.: □文件作廢 Revocation of Document Rev: 0.6 Page 52 of 55 This module is intended for OEM integrators only. Per FCC KDB 996369 D03 OEM Manual v01 guidance, the following conditions must be strictly followed when using this certified module: KDB 996369 D03 OEM Manual v01 rule sections: 2.
UMC-STD31BPN Product Specification 4 □文件新增 Addition of Document Subject: UMC-STD31BPN Product Specification ■文件變更 Alteration of Document Doc. No.: □文件作廢 Revocation of Document Rev: 0.6 Page 53 of 55 IMPORTANT NOTE: In the event that these conditions cannot be met (for example certain laptop configurations or co-location with another transmitter), then the FCC authorization is no longer considered valid and the FCC ID cannot be used on the final product.
UMC-STD31BPN Product Specification 4 □文件新增 Addition of Document Subject: UMC-STD31BPN Product Specification ■文件變更 Alteration of Document Doc. No.: □文件作廢 Revocation of Document Rev: 0.6 Page 54 of 55 Cet appareil est conçu uniquement pour les intégrateurs OEM dans les conditions suivantes: 1) L'antenne doit être installé et exploité avec plus de 31cm entre l'antenne et les utilisateurs 2) Le module émetteur peut ne pas être coïmplanté avec un autre émetteur ou antenne.
UMC-STD31BPN Product Specification 4 □文件新增 Addition of Document Subject: UMC-STD31BPN Product Specification ■文件變更 Alteration of Document Doc. No.: □文件作廢 Revocation of Document Rev: 0.6 Page 55 of 55 DETACHABLE ANTENNA USAGE This radio transmitter [IC: 4441A-UMCSTD31BPN] has been approved by Innovation, Science and Economic Development Canada to operate with the antenna types listed below, with the maximum permissible gain indicated.