CC1 AP Contact name: Stephanie Duong W-NeWeb Corporation Address: 1525 McCarthy Blvd, Suite 206, Milpitas, CA 95035, U.S.A.
Activate Your xFi Pods from the Xfinity xFi Mobile App This document provides step-by-step instructions on how you can activate your xFi Pods using the Xfinity xFi app for mobile devices. If you have additional questions about xFi Pods, please refer to our frequently asked questions. Note: Your xFi Gateway must be activated before you can set up your xFi Pods. Pods activation requires a supported mobile operating system; please see how to get started with Xfinity xFi for details.
Getting Started 1. Sign in with your Xfinity username and password. 2. Select More on the bottom right of your screen.
3. Select Xfinity Device under Add a Device. 4. Select xFi Pods.
. Tap Get Started to begin activating your xFi Pods! Activate your xFi Pods 1. Plug in your first Pod to an active electrical outlet in your home. Note: o Ensure that at least one room separates the Pod and your xFi Gateway. o Do not connect your Pods directly to your xFi Gateway using the Ethernet port on the bottom of the Pod. The Pods connect wirelessly to the xFi Gateway. You will not be able to activate your Pods if one is connected directly to the Gateway.
2. Select Next. 3. Hold your phone six to eight inches away from your first Pod to ensure that the xFi app can associate the Pods with your account and connect the first Pod to your Gateway.
4. Once your first Pod is connected, you will need to plug in your remaining Pods throughout your home. Make sure that your Pods are evenly spaced from each other and your Gateway. 5.
6. As your remaining Pods are plugged in, they will begin to come online. When all Pods have been connected, tap Name Your Pods. 7. You can name your Pods in any order. To do so, choose a Pod to name and hold your mobile device close to that Pod.
8. Once the app identifies which Pod you are naming, you will be presented with the option to assign the Pod a name. Enter a name and tap Confirm Name. Repeat steps five and six to name each remaining Pod.
9. Once naming is complete, tap Finish Setup. 10. The activation process is now complete! Over the next few days, your home WiFi network will be optimized. Note: Advanced Settings like WiFi Mode, Channel and Channel Width will now be managed automatically.
. Tap OK to end the set-up. 12. When you return to the Overview screen on the xFi mobile app, a notification at the top of the screen will indicate that your Gateway and xFi Pods are Online.
You can also view your Pods in the Network tab after they have been activated. Note: Once your Pods are activated, the light on your device should stop flashing and remain off.
FCC Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
IC Industry Canada Statement This device contains license-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada’s license-exempt RSS(s). Operation is subject to the following two conditions: (1) This device may not cause interference. (2) This device must accept any interference, including interference that may cause undesired operation of the device. For product available in the USA/Canada market, only channel 1~11 can be operated.
Warning Risk of electrical shock. Do not expose the device to water or moisture. The device is a high-performance communications device designed for home and office environments. Do not use the device outdoors. Keep the device in an environment between 0°C ~ 40°C (32°F ~104°F). To avoid overheating, do NOT place any object on top of the device. Do not restrict the flow of air around the device. The manufacturer assumes no liabilities for damage caused by any improper use of the device.
IC Déclaration d’Industrie Canada Cet appareil contient des émetteurs / récepteurs exempts de licence qui sont conformes au (x) RSS (s) exemptés de licence d'Innovation, Sciences et Développement économique Canada. L'opération est soumise aux deux conditions suivantes : (1) Cet appareil ne doit pas provoquer d'interférences. (2) Cet appareil doit accepter toute interférence, y compris les interférences susceptibles de provoquer un fonctionnement indésirable de l'appareil.
ATTENTION Risque de choc électrique. Ne pas exposer l'appareil à l'eau ou à l'humidité. L’appareil est un dispositif de communication de haute performance conçu pour les environnements domestiques et de bureau. Ne pas utiliser l'appareil à l'extérieur. Gardez l'appareil dans un environnement entre 0°C ~ 40°C (32°F ~ 104°F). Pour éviter la surchauffe, ne placez aucun objet sur le dessus de l'appareil. Ne pas restreindre la circulation d'air autour de l'appareil.