User's Manual

ManualsBrandsWIZZILAB ManualsElectronicsWGATE-PRO-41A0F1

WGATE-PRO-41A0F1

User Manual rev. 1.4

DASH7 915 MHz - IP Gateway

for Industrial Applications

FCC ID : ZARZVWG-41A0F1

Introduction

Features

• Metallic casing for enhanced protection.

• Full D7A-IP Gateway for DASH7 Al-

liance Protocol v1.2.

• Controlled over HTTPS and MQTT.

• Ethernet connectivity.

• Cellular Connectivity (option)

• 915 MHz ISM band.

• Modulation schemes:

• FSK @ 9.6 / 55.6 / 166.7 kbps

• LoRa @ SF8, SF10, SF11, SF12

• Output power up to +13 dBm.

• 12V power supply.

• Operating temperature: 0 °C to 40 °C

Applications

• Wireless sensor network

• Security systems

• Industrial monitor and control

• Internet of things (IoT)

Description

• The WGATE is a fully integrated DASH7

Gateway operating in the 915 MHz ISM

bands.

• Based on Variscite DART-6UL chipset

with enhanced MQTT firmware.

• D7A modem at 915MHz compatible with

D7A 1.2 specification (www.dash7-

alliance.org)

• Controlled directly from its online inter-

face.

• Allows for bi-directional communication

with any DASH7 enabled device.

• Mikrobus™ extension slot.

• WizziLab product line at

www.wizzilab.com/products

WIZZILAB Technical Documentation 1/23

Summary of content (23 pages)

PAGE 1
WGATE-PRO-41A0F1 User Manual rev. 1.4 Applications • • • • Wireless sensor network Security systems Industrial monitor and control Internet of things (IoT) Description DASH7 915 MHz - IP Gateway for Industrial Applications FCC ID : ZARZVWG-41A0F1 Introduction Features • Metallic casing for enhanced protection. • Full D7A-IP Gateway for DASH7 Alliance Protocol v1.2. • Controlled over HTTPS and MQTT. • Ethernet connectivity. • Cellular Connectivity (option) • 915 MHz ISM band.
PAGE 2
Table of Contents WGATE-PRO-41A0F1 rev 1.4 Table of Contents Introduction..........................................................................................................................................1 Table of Contents..................................................................................................................................2 Index of Tables.....................................................................................................................................
PAGE 3
Index of Tables WGATE-PRO-41A0F1 rev 1.4 Index of Tables Table 1. Recommended operating conditions.......................................................................................4 Table 2. Casing dimensions..................................................................................................................5 Table 3. Current consumption @ 12V..................................................................................................9 Table 4. DASH7 data rates......................
PAGE 4
WGATE-PRO-41A0F1 rev 1.4 Hardware characteristics 1 Hardware characteristics 1.1 Recommended operating conditions Table 1. Recommended operating conditions Symbol Parameter TA Operating ambient temperature range VCC Operating supply voltage RH Non-condensing Relative Humidity Min. Typ. Max. Units 0 - 40 °C 10.0 12.0 14.
PAGE 5
WGATE-PRO-41A0F1 rev 1.4 Hardware characteristics 1.2 Mechanical description 12V Power input Ethernet connector LED indicator Hardware Reset 915 MHz antenna Table 2.
PAGE 6
WGATE-PRO-41A0F1 rev 1.4 Hardware characteristics 1.3 Power supply The WizziGatePro works on a 12V external power supply, model YNQX18 Drawing 1: Power Jack polarity 1.3.1 Specifications Voltage : 100-240Vac Input Current : 1A Frequency : 50-60Hz Efficiency Level : VI Low Standby Power : 0.3W Max Output Voltage Tolerance : ±5% Output Voltage : 12V Output Current : 1.5A Max Output Power : 18W Max 1.3.
PAGE 7
WGATE-PRO-41A0F1 rev 1.4 Hardware characteristics PSE Certificate(Japan): J60950-1 1.3.3 Reliability Burn in: 100% full load, 40±5 °C , 4 hours Leakage Current: 0.25mA Max. at 240Vac Voltage Withstand (Between Primary and Secondary): 3000Vac,60S, 5mA Max. Insulation Resistance (Between Primary and Secondary): 20MΩ min at 500V DC MTBF: over 30,000 hours @25 °C with full load according to MIL-HDBK-217F. 1.3.
PAGE 8
WGATE-PRO-41A0F1 rev 1.4 Hardware characteristics Chinese Market: GB9254-2008/GB17625.1-2003/GB13837-2003/GB17625.
PAGE 9
WGATE-PRO-41A0F1 rev 1.4 Hardware characteristics 1.4 10/100/1000 Ethernet The GW supports one GbE port. The Ethernet port operates in a 10BASE-T, 100BASE-TX or 1000BASE-T configuration and supports auto MDI/MDIX for automatically switching data receive and data transmit pairs. Additional features include full-duplex operation as well as support for auto-negotiation. The Ethernet MAC address is programmed during manufacturing.
PAGE 10
WGATE-PRO-41A0F1 rev 1.4 Hardware characteristics 1.5 LED indicator These LEDs display the status of the WizziGatePro. RED LED: Power Supply Status • ON: Powered by Adapter • GLOWING: Charging Internal Battery (Internal Battery is an optional feature) • BLINKING every 1s: Battery Powered • BLINKING every 5s: Battery Powered in Sleep Mode ORANGE LED: Network Error Status • ON: Can not ping Dash7Board (i.e.
PAGE 11
WGATE-PRO-41A0F1 rev 1.4 Hardware characteristics 1.6 Main SubGHz modem A reverse polarity SMA connector is provided for connecting an externally mounted antenna (915MHz FCC).
PAGE 12
WGATE-PRO-41A0F1 rev 1.4 Hardware characteristics 1.7 Reset button Using a paperclip, you can press the button through the little hole Press button for 2s to reset the board.
PAGE 13
WGATE-PRO-41A0F1 rev 1.4 Hardware characteristics 1.8 Chipset The WizziGatePro uses Variscite’s DART-6UL SoM (System on Module) and WizziLab’s custom carrier board.
PAGE 14
WGATE-PRO-41A0F1 rev 1.4 Electrical characteristics 2 Electrical characteristics 2.1 Current consumption Table 3. Current consumption @ 12V Symbol Parameter Min. Typ. Max. Units IS Sleep mode - 0.
PAGE 15
WGATE-PRO-41A0F1 rev 1.4 Wireless characteristics 3 Wireless characteristics 3.
PAGE 16
WGATE-PRO-41A0F1 rev 1.4 Wireless characteristics 3.1.1 DASH7 modem 3.1.2 Data Rates The DASH7 modem has several data rates and modulation scheme available to better fit any kind of application. Table 4. DASH7 data rates Modulation scheme Parameter GFSK LoRa™ 3.1.
PAGE 17
WGATE-PRO-41A0F1 rev 1.4 How to use 4 How to use To setup your wizzigate pro, you will need to: - Power up your wizzigate. - Access its administration interface. - Register the gateway to the Wizzilab cloud. - Configure its network configuration according to your production environment. 4.1 Powering the WGATE-PRO The WizziGate is powered by a 12V power supply provided with the AC adapter shipped with the gateway. 4.2 Connect to the Wizzigate administration interface 4.2.
PAGE 18
How to use WGATE-PRO-41A0F1 rev 1.4 4.3 Register the gateway to the Dash7Board NOTE: Registering to the Dash7Board requires an account on the Dash7Board. If you don't have an account on the Dash7Board, your Gateway has been pre-registered and you can skip this step. Once you have access to the administration web interface of the gateway, you have to register the gateway to the dash7board server.
PAGE 19
WGATE-PRO-41A0F1 rev 1.4 How to use with the serial number (SN) your gateway’s label. Click the Register button. 4.4 Configure the network In most standard setup, the gateway needs to be connected to a network. It allows it to be accessible by applications on this network and to connect to our dash7board.wizzilab.com cloud backend (if internet is accessible) and/or to a local backend. If using the Wizzilab dash7board cloud solution, the gateway requires its internet access to allow some outgoing ports.
PAGE 20
WGATE-PRO-41A0F1 rev 1.4 How to use the type of setup you want. If you have never touch the Wizzigate ethernet configuration on its web interface configuration tab, then it is configured by default to use DHCP. Therefore you can just plug the gateway to the network, and it should automatically get access to it. If you changed the Wizzigate ethernet configuration: • Go to the configuration tab of the administration web interface. • In the Ethernet section, tick the DHCP checkbox.
PAGE 21
WGATE-PRO-41A0F1 rev 1.4 Ordering information 5 Ordering information Contact us at : contact@wizzilab.com Or visit our website: http://www.wizzilab.
PAGE 22
WGATE-PRO-41A0F1 rev 1.4 FCC Caution 6 FCC Caution Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
PAGE 23
WGATE-PRO-41A0F1 rev 1.4 Revision history 7 Revision history Table 7. Document revision history Date Revision Changes 2019-05-16 1.0 Document creation 2019-10-04 1.1 Updated picture with grey casing Added information on LED and Button 2020-11-10 1.2 User Manual for FCC certified version 2020-12-16 1.3 Removed options not available for this WGATE-PRO version 2020-12-22 1.4 Update pictures. Detailed How To Use section.